Triangle Lights LED PAR 64 6CH LCD 181 LONG User Manual

Advertisement

LED PAR 64 6CH LCD 181 LONG

1 Specifications

Number of LEDs
Power Consumption
Beam angle
Projecting distance
LED Lumen
LED Expected Life
Control system
DMX Channel
Connection
Input Voltage
Operating Voltage
LED Current
Dimension
Housing
Weight
Package Dimension
USER MANUAL
181X10MM LED(R:49, G:72, B:60)
20W
25° OR 18°
10-15M
80,000 hours
DMX 512
6 Channels
3 pins XLR-sockets
100V~256VAC
24VDC
320mA ±5%
19 (Inner Diameter is 18, Height excluding bracket is 25.5)CM
Metal. Black or Chrome
3kgs±5%
24X24X50CM
www.storexp.com
triangle.lights@gmail.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LED PAR 64 6CH LCD 181 LONG and is the answer not in the manual?

Questions and answers

Summary of Contents for Triangle Lights LED PAR 64 6CH LCD 181 LONG

  • Page 1: Specifications

    LED PAR 64 6CH LCD 181 LONG USER MANUAL 1 Specifications Number of LEDs 181X10MM LED(R:49, G:72, B:60) Power Consumption Beam angle 25° OR 18° Projecting distance 10-15M LED Lumen LED Expected Life 80,000 hours DMX 512 Control system DMX Channel...
  • Page 2: Control Modes

    2 Control Modes Stand Alone Mode Select effects using the LCD panel International standard DMX512 signal control 3 LCD Control Panel Push button to Navigate through the menu. This button does NOT keep you in the MAIN 1- Menu WITHIN MENU but it will browse all the menu options the MAIN menu OPTION that was SAVED last time it was turned on.
  • Page 3 4 LCD Control in Details Main and Sub Level Menus are shown below: Main Menu Menu Description A001-A512 DMX Address. Refer to Section 5 for DMX Chart. ADDR: PR01-PR16 No Function SP01-SP08 No Function A001-A512 No Function nASt PR01-PR16 Select 16 lighting effects with Up/Down button. SP01-SP08 Select 8 level of speed for strobe, fading or color change, which is available in PR01-PR16.
  • Page 4: Dmx Chart

    5 DMX CHART Description Channel No. DMX Value Red Dimmer 0~255 Used in combination with CH6 to get color. Add CH5 to get strobe. Green Dimmer 0~255 Used in combination with CH6 to get color. Add CH5 to get strobe. Blue Dimmer 0~255 Used in combination with CH6 to get color.
  • Page 5: Troubleshooting

    7 Trouble-Shooting 3 of the leds are not working when I received the lights. LEDs are soldered to the led board and they work in sets of 3. If one solder point get loosen due to impacts in transit, it will bring down the other two in the group. Fixing this is easy if you have a solder iron. Open the case, locate the 3 leds that are not working, and go to the other side of the led board where you see the connections.

Table of Contents