Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for CoCo AEX-701
- Page 1 USER’S MANUAL version 1.1 English AEX-701 SIGNAL AMPLIFIER...
- Page 2 AEX-701 SIGNAL AMPLIFIER A: Base plate with slots Picture of the AC-1000 and the AYCT-102 B: Battery cover (neither is included) C: Learn button D: Battery compartment...
- Page 3 AEX-701 SIGNAL AMPLIFIER [1] Start situation: Your transmitter and receiver [2] Use a screwdriver to pry the base plate off of have been configured correctly but are not in range the back. of each other. Do not place the screwdriver in the middle but Temporarily place the transmitter and receiver rather under the left or right side.
- Page 4 AEX-701 SIGNAL AMPLIFIER [3] Remove the 8 screws and open the battery [4] Install 2 AA alkaline batteries. Make sure to compartment. install them with the correct polarity.
- Page 5 AEX-701 SIGNAL AMPLIFIER [5] Press the “Learn” button briefly to activate the [6] Briefly press the ‘on’ button on the remote search mode. control (or send an ‘on’ signal from another type of transmitter). The indicator on the front will begin to flash!
- Page 6 [8A] Fold out the foot to place the product on a reattach the base plate. horizontal surface. The AEX-701 must be located within the wireless range of your remote control / transmitter! Your transmitter must be located within the wireless range of the AEX-701!
- Page 7 AEX-701 SIGNAL AMPLIFIER [8B] Use the slots on the rear to mount the product [9] With the assistance of the AEX-701 your on the wall. receiver can now be controlled with the remote control/transmitter even if they are not within each others’...
- Page 8 (3) The indicator of the AEX-701 flashes twice to confirm. • Removal of all the transmitter codes from the memory of the AEX-701: (1) Press ‘Learn’ for 6 seconds. (2) The indicator begins flashing quickly. (3) Briefly press the ‘Learn’ button again.
- Page 9 • There may be restrictions on the use of this device outside the EU. If this device is used outside the EU, check whether the device complies with the local directives. This product complies with the essential requirements and other relevant provisions of the applicable European directives. The Declaration of Conformity (DoC) is available at www.coco-technology.com.
- Page 10 If possible, submit this product for recycling after use. Do not dispose of the product with household trash. Warranty and copyright This device is covered by a 2-year warranty that begins on the day of purchase. Visit www.coco- technology.com/warranty for additional information. Reprinting of (portions of) this manual without...
- Page 11 P.O. BOX 126 4760 AC ZEVENBERGEN THE NETHERLANDS www.coco-technology.com Declaration of Conformity Pan-Trade International BV declares that the COCO product, model: type designation AEX-701 SIGNAL AMPLIFIER item number 74029 is in compliance with the essential requirements and other relevant provisions of directives R&TTE 1999/5/EC, EMC 2004/108/EC and LVD 2006/95/EC and is compatible with the standards EN 300 220- 1/3, EN 55015, EN 301 489-1/3 and EN 60950.
Need help?
Do you have a question about the AEX-701 and is the answer not in the manual?
Questions and answers