Kohler Generator Sets 20--2800 kW Installation Manual page 10

Notice
NOTICE
This generator set has been
rewired from its nameplate voltage
to
NOTICE
Voltage reconnection. Affix a notice
to the generator set after reconnecting
the set to a voltage different from the
voltage on the nameplate.
voltage reconnection decal 246242
from an authorized
distributor/dealer.
VI Safety Precautions and Instructions
Hardware damage. The engine and
generator set may use both American
Standard and metric hardware. Use
the correct size tools to prevent
rounding of the bolt heads and nuts.
Hardware damage.
switch may
Standard and metric hardware. Use
246242 the correct size tools to prevent
rounding of the bolt heads and nuts.
Order
service
NOTICE
NOTICE
The transfer
use both American
NOTICE
When replacing hardware, do not
substitute with inferior
hardware. Screws and nuts are
available in different hardness ratings.
To indicate hardness,
Standard hardware uses a series of
markings, and metric hardware uses a
numeric system. Check the markings
on the bolt heads and nuts for
identification.
NOTICE
Canadian installations only.
standby service connect the output of
the generator set to a suitably rated
transfer switch in accordance with
Canadian Electrical Code, Part 1.
TP-5700 7/93
grade
American
For