Subscribe to Our Youtube Channel
Summary of Contents for Neostar Electronics GSCD1
- Page 1 PROFESSIONAL BELT DRIVE TURNTABLE WITH CASSETTE RADIO CD RECORDER AND USB ENCODING TO COMPUTER 5 IN 1 SYSTEM GSCD1 INSTRUCTION MANUAL...
- Page 2 Location of controls 1) Turntable cover 2) LCD display 3) CD tray open button 4) CD tray 5) Aux in jack 6) Earphone jack 7) Panel cover 8) Remote sensor 9) Power LED indicator Power button 11) Finalize button 12) Erase button 13) Track separation button 14) Record button 15) Eject button...
-
Page 3: Stop Mode
Remark : According to the cartridge manufacturer, the working pressure of the stylus provided is within a range of 4 – 6 grams.. All styli have their own working pressure. Please refer to the specifications. Connection Connect the speaker wire to the speaker terminal (40) located on the rear side of unit and connect the AC line cord (44) to AC outlet. -
Page 4: Recording Function
Remark:- Before pressing the “ CD tray open ” button (3) for changing disc press the “ CD stop ” button (19). The reaction time of the CD burner is longer than normal CD player due to the complicity of the system. WARNING : DO NOT press difference function buttons within a very short time of one another as this may cause a mal-function of the system. -
Page 5: Recording Setting
After few seconds, the LCD (2) will show the time counter. The system is ready to start the recording process. Now begin the playback of your vinyl. After completing of recording, press the “ Stop ” button (19) . II) cassette recording Select the function switch (26) to “... - Page 6 B) Erase one track 4. Set at CD function mode and place the un-finalized CD-RW disc you would like to delete the track. 5. Press the “ Erase “ button(12) at CD stop mode & “Er“ and the last track number will appear on the LCD (2) 6.
- Page 7 Lift the tone arm from the rest and slowly move it to the record side. The platter will start to rotate and position the tone arm over the desired position of the record. Pull down the cueing lever (36). The tone arm will slowly descend onto the record. At the end of record, the tone arm will return to the rest position automatically.
- Page 8 Connecting to a computer for recording Before getting started, please install the “ AUDACITY ” recording software to your computer. Below is an example using a computer with Microsoft XP and the Audacity software installed. For more options, please refer to the Audacity software guide separately.
- Page 9 Button descrition 1) Play/Pause In CD mode, press once to start playback. Press again to enter pause mode 2) Skip up /down Press to select previous / next tracks in CD mode 3) Stop In CD mode, press to stop playback 4) CD Press to select CD function...
-
Page 10: Specifications
Any modification, tampering of internal workings or wiring, willful damage or misuse will render this guarantee invalid. Your statutory rights remain unaffected. Should you have any query or complaint, please contact our Neostar Electronics customer helpline on 0845 555 4440 or visit www.neostarelectronics.com...
Need help?
Do you have a question about the GSCD1 and is the answer not in the manual?
Questions and answers
Voices on my Vynal records sound like chipmunks
Voices on Neostar Electronics GSCD1 vinyl records may sound like chipmunks if the platter speed is set too high. The manual mentions a strobe calibration system to check the speed. If the strobe dots appear to flow to the right, the platter is spinning slower than the rated speed, and if they flow to the left, it is spinning too fast. Adjust the pitch control to correct the speed.
This answer is automatically generated
When I turn my turntable on the screen is entirely blue and has no select source text however when I switch it over to radio mode it works so its not a problem with the screen are there any fixes. I have already turned on and off and did noit fix