Advertisement
Table of Contents
- 1 User Guide
- 2 About Our Great Company
- 3 How to Use the Lightwear 4In1 LED Headlamp
- 4 Using the LED Light as a Stationary Lamp
- 5 Detaching Clips and Removing Lens and Battery Compartment
- 6 Using as a Mobile Spotlight and Belt or Harness Attachment
- 7 Bike Attachment/Adapter Usage
- 8 Adjusting Beam Intensity and Focus
- Download this manual
Advertisement
Table of Contents
Summary of Contents for SportsTek Lightwear 4in1 LED Headlamp
-
Page 1: User Guide
User Guide Lightwear 4in1 LED Headlamp... - Page 2 We truly believe that you’ll love your new Lightwear 4in1 LED Headlamp. In the meantime check out our website at: www.SportsTekOnline.com...
- Page 3 The Lightwear 4in1 is a multipurpose light with amazing functions and superb functionality. You have the choice to use the light the way you want to. It gives you complete freedom, you can use it on your belt or gear, you can place the headlight on your bike and you can place it on the head for total hands free maneuverability.
- Page 4 The LED light can also be used as a stationary lamp as shown. First, you must gently remove the cord from the two clips located along the head straps.
- Page 5 Gently detach the clips by pressing the two latches apart in the opposite direction as shown. (DO NOT put too much force on the latches as it may cause the clips to snap off.) Next, slide off the lens and battery compartment by pressing your finger underneath the tab and gently push up on the tab to slide it off the housing.
- Page 6 These two clips can then be slid together to allow you to use as a mobile spotlight and placed on a table or any stationary countertop. The battery compartment and lamp can also be used on a belt or harness by sliding the back of the clips over your gear as shown here.
- Page 7 The SportsTek Lightwear LED light also includes bike attachment/adapter which can be placed around the handle bar. You must first remove the screw cap on the back of the bike attachment by turning it counterclockwise. You will then slide the adapter over the handlebar and retighten using the same screw cap.
- Page 8 To adjust the beam intensity and focus, you can rotate the lens clockwise or counterclockwise. You can also slide the lens inward and/or outward to adjust the light’s focus. The LED lens can also be tilted down for added maneuverability. Questions or Suggestions? Contact us at: Support@SportsTekonline.com...
Need help?
Do you have a question about the Lightwear 4in1 LED Headlamp and is the answer not in the manual?
Questions and answers