Table of Contents
Advertisement
Securing a child restraint seat
with tether anchor system
Child restraint hook holders are
located on the back of the rear seat-
backs.
This symbol indicates the
position of the tether anchor.
1.Route the child restraint seat strap
over the seatback.
OPS033019
For vehicles with adjustable head-
rests, route the tether strap under
the headrest and between the
headrest posts, otherwise route
the tether strap over the top of the
seatback. In case of interference
between the child restraint seat
and the headrest remove the par-
ticular head restraint for better fit-
ment of the child restraint seat.
2.Connect the tether strap hook to
the appropriate child restraint hook
holder and tighten to secure the
child restraint seat.
Safety features of your vehicle
WARNING
Never mount more than one
child restraint to a single tether
or to a single lower anchorage
point.
The
caused by multiple seats may
cause the tethers or anchorage
points to break.
Check that the child restraint system
OXM039034N
is secure by pushing and pulling it in
different directions. Incorrectly fitted
child restraints may swing, twist, tip
or separate causing death or serious
injury.
- Tether strap
increased
load
3 31
Advertisement
Table of Contents
