Table of Contents
Advertisement
Use with IR remote handset
To enter OSD configuration mode, holding "Display" key and power on
the M3-300 unit. The OSD menu screen will be shown as follow:
Press "Display" key to select option.
Press "+" or "-" key to change value.
Press "+" or "-" key to confirm "SAVE AND EXIT".
7.2 Start up
Two start-up modes (Start track mode and Sleep mode) can be selected
when exporting a playlist to CF Card using DV Studio Plus software.
7.2.1 Start track mode
If start track mode is selected in playlist, the pre-defined started track will be
played first after boot-up. For example, if track #5 is defined as the start
track, then the M3-310 will play track #5 after start up. (The default start
track is the first track in playlist)
Step by step:
Plug in the external power supply
Insert Compact Flash Card containing DV Studio Software exported ".pll
/ .prj" and other media files. (e.g. .mpg, .mp3, .jpg)
Switch the power 'on/off' switch to 'on'.
The track #5 (started track) will be played first.
Once the track #5 is finished, the first track in playlist will be followed
and played.
7.2.2 Sleep mode
If sleep mode is selected in a playlist, a blank screen will be shown at the
beginning until the pre-defined button has been pressed. For example, if
button# 3 is defined in sleep mode, after boot-up the M3-310 will play a
blank screen until the button #3 is pressed.
VOLUME
08
V1. 19. 00
Y
M
D
H
M
2009 . 09 . 14 MON
21 : 00 : 12
ID NO: 0000
DATA LOGGING: OFF
OSD: ON
JPEG TRANS TYPE: OFF
SAVE AND EXI T
S
Page 25 of 36
Advertisement
Table of Contents
