Advertisement
Quick Links
Installation and Mounting Guide
Thank you for purchasing the All Purpose Ventilator from U.S. Sunlight Corp.
We are committed to providing alternative energy products that can improve your
everyday life and our environment. We have reduced packaging material and
eliminated Styrofoam to reduce the impact on landfills. We offer an installation
video that is available to view online at www.ussunlight.com.
If there is a problem with your U.S. Sunlight product call us at 1-877-50-USSUN.
Spare parts, installation advice, or recommendations for professional installers
in your area are only a phone call away. Professional installation may be much
less than you expect, please call us to get average rates for your area.
Before beginning the installation of your new All Purpose Ventilator, please read
through the entire installation instructions and call us if you have any questions.
Fan mounting options:
• 3" galvanized deck screws
(for mounting 2x4 braces to framing members if req.)
Panel mounting options:
• 2" pan head tapping screws
(for mounting to composition roof)
• caulk gun with roofing adhesive
(for mounting solar panel directly to s-tile, flat tile or metal roofs)
A*
D
C
Optional Hardware (not included)
Panel mounting options:
• 1.5"- 3" anchor screws
• 1.5"- 3" galvanized screws
(roof mounting)
• caulk gun with roofing adhesive
BOX CONTENTS -
check. You should have:
B
A - Fan assembly
B - Solar panel with 30 ft. of attached wire
C - Wall mounting brackets (2 ea)
D - Mounting bracket bolt and nut (4 ea)
E - 1.5" screws for fan mounting (8 ea)
* Some models include a thermal switch
in the fan assembly
MINIMUM TOOLS REQUIRED
• Power drill with phillips head
driver and an 1/8" drill bit
• Adjustable wrench
• Measuring tape
• tin snips or wire cutters
(for cutting hole in vent screen)
• Circular saw or handsaw
(for cutting 2x4s for bracing if req.)
• pencil or marking pen
• 1/4" coaxial staples
(for securing the wire after installation)
• caulk gun with roofing adhesive
(depending on your specific type of
stucco, cement or brick wall. Must support up to 20 lbs)
type of wood or vinyl siding. Must support up to 20 lbs)
(for sealing screw heads when mounting to wood or vinyl siding)
Unpack and
© Copyright 2014 All Purpose Ventilator C01 ver4
923 Tahoe Blvd, Suit 110
Incline Village, NV 89451
Tel: 877-50-USSUN
www.ussunlight.com
support@ussunlight.com
(wall mounting)
(depending on your specific
D
4 each
8 each
E
Advertisement
Related Manuals for U.S. Sunlight All Purpose Ventilator
Summary of Contents for U.S. Sunlight All Purpose Ventilator
- Page 1 • tin snips or wire cutters If there is a problem with your U.S. Sunlight product call us at 1-877-50-USSUN. (for cutting hole in vent screen) • Circular saw or handsaw Spare parts, installation advice, or recommendations for professional installers (for cutting 2x4s for bracing if req.)
-
Page 2: Mounting The Fan
If you have any questions or concerns please feel free to call our customer service specialists at 877-50-USSUN. Determine your mounting application One of the great features about the All Purpose Ventilator is the many mounting options. Gable Vent Static or Turbine Vent... - Page 3 9 fig. 10 Static or Turbine Vent Installation The All Purpose Ventilator can be used to push hot air out of your attic through existing roof vent. Important Tip: Seal off other static vents to avoid turning them into intake vents once the powered fan is installed and running.
-
Page 4: Mounting The Solar Panel
Mounting the Solar Panel Maintenance Tip: The solar panel is most effective when clean and free of dust, leaves, and debris. Normally, rainwater will cleanse the solar panel and keep it operating at peak efficiency. If necessary, simply hose off the solar panel between rain showers. - Page 5 To avoid accidents, use appropriate attire: safety glasses, gloves, hard hats, restraints and other appropriate equipment. Use this product only as indicated by U.S. Sunlight Corp. Any questions on appropriate applications, call 1-877-50-USSUN. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable building codes and standards, including fire requirements.
-
Page 6: Warranty
W A R R A N T Y Manufacturer’s Limited Warranty U. S. Sunlight Corp. (“Manufacturer”) warrants that certain of its product components are free from defects of workmanship and/or materials for a period of time commencing on the date of original purchase and continuing as noted hereafter: (a) attic fan motors for a period of ve (5) years (b) solar panels for a period of twenty (20) years (c) attic fan housings for a period of twenty (20) years.