If you have never installed an add-in board in your computer before, please follow the instructions in this section carefully. You may also want to refer to the Installation Chapter in your manual. What is V.92? · Modem on-hold It allows you to take incoming call while you are online by putting the modem on hold. This feature requires a call waiting service to be provided by your local phone company.
Selecting the COM Port The Zoltrix Smart Lite V.3 is PnP and can use COM ports 1 to 8 and IRQ's 2, 3, 4, 5, 10, 11, 12 & 15. This is selected automatically. There are no hardware jumpers or dip switches to set.
Page 4
Installing Telephone Lines The Fax/Modem has two modular telephone jacks on the back of the modem. You will need to connect your Fax/Modem to the wall outlet via a modular telephone cord. If your wall outlet is not a modular type, you can purchase an inexpensive converter at most electronics or phone stores.
Click on the Browse button and then select the correct drive and directory containing the Win98 driver. Then click on the NEXT button. If you have the Zoltrix COMMUNICATIONS CD-ROM, insert the CD-ROM into your CD-ROM drive and select D:\SmartLITE_V3\Win98 Note: Replace D: with the drive letter of your CD- ROM drive if necessary.
7. Click on the ”FINISH· button to complete the modem driver installation. 8. You should then see the Modem driver and Wave device for the voice modem detected and installed. Un-Installation of the Windows 98 Driver If you ever want to remove the modem or update the modem drivers with newer versions obtained on the web, you must first remove the HSF modem drivers.
Make sure that your phone cable is working properly and that it is firmly seated to the phone socket at your phone jack and in the rear panel of the modem. On-line Technical Support If you have access to the World Wide Web be sure to visit the Zoltrix home page at: http://www.zoltrix.com...