Digital Photo Frame User Manual Safety precaution 1) Use only the supplied adapter with output 5V. 2) Turn off power before cleaning. Use only a soft cloth to clean the unit. Do not use liquid cleaners. 3) Avoid exposing the unit to extreme heat. 4) Do not disassemble the Digital Picture Frame, otherwise it may result in electric shock and void your warranty.
Front View C. Rear View 6. LCD Screen 7. Bracket Holder Attach the bracket here to support the Digital Picture Frame. Bottom View 8. USB Port Insert the USB flash drive into this port 9. SD/MS /MMC Card Slot Insert the SD/MS/MMC card into this port. 10.
Step 2: Connect the power adapter to an electronic socket and the DC IN port of the device. Step 3: Insert a memory card (with the card’s electrical contacts towards the front of the unit) or USB flash drive in the Digital Picture Frame. A slide show should begin automatically.
Question/Troubleshooting Guide This chapter presents some troubleshooting problems you may encounter while using the device. Even if the following guide fails to solve your problem, please do not disassemble the device, but leave the problems to professional staff. 1. Question: What kind of photos does this device’s supports? Answer: The Frame will display digital photos that are stored in the JPEG format which is the standard format for nearly all digital cameras.