Cleaning The Duplex Rollers - Kodak DUPLEX DL2100 User Manual

Cleaning the Duplex Rollers

Important!
Make sure that you wear lint-free
gloves to perform this procedure.
1. Turn off the printer.
2. Unplug the power cord.
3. Open the cover for the duplex
unit.
4. Dampen a lint-free cloth with
warm water.
5. Turn one roller while you use
the damp cloth to wipe the
other roller. Use the damp
cloth to wipe the entire surface
of the roller. Repeat the
procedure for the second roller.
6. Use the damp cloth to clean
the lower set of rollers. Wipe
in one direction only, rotating
the roller to clean the entire
surface.
7. Wait approximately 5 minutes
for the rollers to dry.
8. Close the cover for the duplex
unit.
9. Plug the power cord for the
printer into the power source.
10. Turn on the printer.
30