Kodak mc3 User Manual page 68

mc3 Device
Problem
The mc3 device is in
"sleep" mode.
The Power LED flashes. Battery power is too low
A Battery icon appears on
the LCD.
When taking or deleting
pictures, the number of
pictures remaining
occasionally skips a
number, or the number
does not change.
62
Cause
To conserve battery
power, the device goes
into sleep mode if not
used for an extended
time. If the device still
senses no activity, it shuts
down.
for the mc3 device to
function.
Battery power is low.
Image file sizes vary,
depending on the content
of the picture.
Solution
Press the Menu button to
awaken the device. If the
device has shut off, press
the Power button to turn
it back on.
Replace or recharge the
batteries. See "Loading
the Batteries" on page 2.
The mc3 device may still
be used until the
batteries are exhausted.
Keep a fresh set of
batteries (or a KODAK-
specified battery
charger) on hand.
This is normal.