PCUT CB1300 User Manual page 18

PCUT CB SERIES USER ' S MANUAL
4.3.7 Working state and pause, machine has three working states
4.3.7.1 USB/COM working state
4.3.7.2 blue tooth working state
4.3.7.3 D card working state
In any state, if you press machine will go to pause state
Under this mode,number at left is blade force value,number at rught is
speed value,press increase blade force,press decrease the blade
force,press increase the speed,press decrease the speed. Again
press cutter back to working state.
Note: in this mode, force and speed can be directly saved by using arrow
keys
Page18