Sony Xperia Z3 SOL26 Basic Manual

Preface
Thank you for buying "Xperia
from here on).
Before using the product, read "Basic Manual" (this manual)
and "
(Japanese) to ensure safe use and handling.
About Operating Instructions
Basic Manual (this manual)
Handles only basic operations for main features.
SOL26
For detailed descriptions on various functions, refer to the
"Instruction Manual" (Japanese) app installed on the product
or "
available on the au homepage.
http://www.au.kddi.com/support/mobile/guide/manual/
Company names and product names referred to in this
manual are trademarks or registered trademarks of
respective companies. The TM, ® marks may be omitted in
this manual.
"Instruction Manual" (Japanese) app
This product allows you to use the "Instruction Manual"
(Japanese) app on the product to confirm detailed
operational procedures.
Certain functions can be directly activated from the app
screens on which their operations are described.
From the Home screen, [
(Customer support)] [Basic Manual] (Japanese)
When you activate for the first time, follow the onscreen
instructions to download and install app.
❖Information m Flash/Photo light
n Camera lens
Purchase a specified charger (sold separately).
o GPS/Built-in antenna
Illustrations used in this manual are just images for explanations.
p Nameplate *3
They may be different from actual ones.
q au Nano IC Card (LTE)
*4
r Back cover
Getting Ready
® ®
s Wi-Fi /Bluetooth /
*2
antenna part
Names and functions of parts
t
mark
u Built-in antenna *2
a Headset connection
a b
v microUSB connection
terminal
terminal
b Second microphone *1
:
w Desktop Holder
c d e f
Reduces noise to make
contact terminal
easy to listen
x Strap hole
c Notification LED
d Proximity sensor:
i
*1 Do not jab with a sharp object such as a needle. Doing so may
Switches touch panel on
cause a fault.
and off to prevent from
*2 The antenna is built in. Covering around the antenna by the
erroneous operation j
g
hand may affect the quality of call/communication.
during a call/Auto-control
k
*3 Do not remove the nameplate with stickers of CE mark, FCC ID
for display brightness
and IMEI information printed.
e Earpiece/Speaker
*4 Back cover is not removable. Removing so forcibly might cause
f Front camera
damage or a fault. Also, battery is built into the main unit and
g Display (Touch panel)
not removable by customers.
h Microphone/speaker l
i microSD memory card/au
Nano IC Card (LTE) slot
h
j Power key/Screen lock
key: P
k Volume key/Zoom key
l Camera key: k
g
4
When charging is complete, lift the product to remove
Common AC adapter 05
while pressing the Desktop Holder
(sold separately)
Notification 5
Remove the Common AC Adapter 05 (sold separately)
LED
from the outlet
Charging with the AC Adapter
AC 100V
outlet Charging with Common AC Adapter 05 (sold separately) is
explained.
microUSB connection
terminal
Notification
LED
Magnetic
Connecter Desktop Holder
microUSB plug
1
Insert the microUSB plug of Common AC Adapter 05 (sold
Groove
separately), with the engraved side ( ) facing up, straight
into the microUSB connection terminal of the Desktop Holder
2
Insert the power plug of Common AC Adapter 05 (sold
separately) into an outlet
3
Install the product to the Desktop Holder and move it
left or right until it clicks
When the product and the magnetic connector of the microUSB plug
Desktop Holder are connected correctly, the notification
LED of the product turns on.
Common AC adapter 05
(sold separately)
1
Open the microUSB connection terminal cover of the
product while hooking the groove with your fingernail, and
insert the microUSB plug of Common AC Adapter 05 (sold
separately), with the engraved side (
into the microUSB connection terminal of the product
n
For Those Requiring an English Instruction Manual
You can download the English version of the Basic Manual
™ Z3" (simply called the "product"
from the au homepage (available in approximately one month
after the product is released).
Download URL:
(Full Instruction Manual)"
http://www.au.kddi.com/support/mobile/guide/manual/
Safety Precautions
Before you start using the product, make sure to read the
™
"Cautions on using Xperia Z3" to ensure correct use.
Before you assume that the product is malfunctioning, check
for possible remedies in the following au Customer Support
site of au homepage:
http://www.au.kddi.com/support/mobile/trouble/repair
(Full Instruction Manual) (Japanese)"
Regarding notations used in this document
In this manual, keys (key icons) are represented by
simplified illustrations such as x, y, r, P, k.
Operations of tapping menu items/icons/buttons on the
screen etc. are indicated as [(name of the item etc.)].
Screen illustrations shown in this manual may look different
from the actual screens. In some cases, minor details or a
part of a screen may be omitted.
™
In this manual, "microSD memory card", "microSDHC
memory card" and "microSDXC ™ memory card" are
abbreviated as "microSD memory card" or "microSD".
All of the indicated amounts exclude tax unless otherwise
] [
specified.
"The Company" as appears in the manual refers to the
following companies:
a
au Nano IC Card (LTE)
m n o
*2
Your phone number etc. is recorded in the au Nano IC Card (LTE).
s The product is compatible only with
au Nano IC Card (LTE)
p
v
au Nano IC Card (LTE). You cannot
IC (metal) part
q
t use the product with an IC card
other than au Nano IC Card (LTE).
w
Front
r Attaching/removing the au Nano IC Card (LTE)
Before attaching/removing the au Nano IC Card (LTE), make
sure to turn off the product.
x
Attaching the au Nano IC Card (LTE)
u
1
Open the microSD memory card/au Nano IC Card (LTE)
slot cover while hooking the groove with your fingernail
2
Hook the projection of the tray ( ) with your fingernail
to slide the tray straight out, then remove the tray from
the product
Tray
h
2
Insert the power plug of Common AC Adapter 05 (sold
separately) into an outlet
Notification LED lights on the product.
3
When charging is complete, remove the microUSB plug of
Common AC Adapter 05 (sold separately) from the product
and close the microUSB connection terminal cover firmly
4
Remove Common AC Adapter 05 (sold separately) from
the outlet
Charging with the DC Adapter
You can charge from cigarette lighter socket in a car by using
Common DC Adapter 03 (sold separately). For details, refer to
instruction manual of Common DC Adapter 03 (sold
separately).
Charging with a PC
The followings describe charging procedure by connecting
the product to chargeable USB port on a PC using the
microUSB cable of Sony Mobile AC adapter 05 (sold
separately).
1
Open the microUSB connection terminal cover of the
product while hooking the groove with your fingernail,
and insert the microUSB plug of the microUSB cable,
AC 100V
with the engraved side ( ) facing up, straight into the
outlet
microUSB connection terminal of the product
2
Insert the USB plug of the microUSB cable into the USB
port of a PC
Notification LED lights on the product.
When a screen for installation of software or a screen for
new hardware detection appears, skip or cancel it.
) facing up, straight
o
Sold by: KDDI CORPORATION, OKINAWA CELLULAR delivered from the government or local public organization to all
TELEPHONE COMPANY au cell phones in specified areas simultaneously.
Manufactured by: Sony Mobile Communications Inc.
When you receive Earthquake Early Warning, ensure your
safety and take proper action according to the situation
Using au (au Disaster Countermeasure)
around you. When you receive a Tsunami Warning, draw away
You can use (Disaster Message Board) service, from sea coast immediately and evacuate to safe place such
(Emergency Rapid Mail) service that distributes as upland or well-built high building.
(Earthquake Early Warning), (Disaster
1
au
and Evacuation Information) and (Tsunami Warning),
(Disaster Voice Messaging Service), and
(Disaster Information). ❖Information
1 Reception of Emergency Rapid Mail is notified by a special warning
From the Home screen, [au (au Disaster
Countermeasure)] tone and vibration. It is not possible to change the warning tone.
*Earthquake Early Warning is notified by warning tone and voice
au (au Disaster Countermeasure) menu appears.
An agreement screen regarding the use or an initial setting sound ("
Earthquake Early Warning may not arrive before strong
screen appears for the first time you activate this program.
tremors in areas near the epicenter.
Follow the onscreen instructions.
Tsunami Warning is a major tidal wave/seismic sea wave
Using (Disaster Message Board) notification delivered from the meteorological bureau to the
Disaster Message Board service enables you to register information of area including target coast.
well-being from an area of distress via LTE NET in case of large-scale Disaster and Evacuation Information is a service that
distributes bulletins concerning residents' safety including
disaster such as earthquake with a seismic intensity of over 6 lower.
evacuation advisories, evacuation orders and other
1
au (au Disaster Countermeasure) menu [
warnings issued by the national and local governments.
(Disaster Message Board)]
The service is available only in Japan (it cannot be used overseas).
❖Information
™ No information fee or communication charge is required for
To register information of well-being, E-mail address receiving Emergency Rapid Mail.
( ezweb.ne.jp) is required. Set up E-mail address beforehand. KDDI is not liable for damages suffered by customers
resulting from the service's information, lack or delay in the
Using (Emergency Rapid Mail)
information caused by transmission or system breakdowns,
Emergency Rapid Mail is a service that distributes Earthquake
or other events that are outside the responsibility of KDDI.
Early Warning or Tsunami Warning delivered from the
meteorological bureau or Disaster and Evacuation Information
b c
3 4
Set au Nano IC Card (LTE) into the tray with IC (metal) Close the microSD memory card/au Nano IC Card (LTE)
part facing up ( ), insert the tray with the card into the slot cover, press it firmly to ensure that there are no
main unit and press it all the way gaps between the cover and the main unit
Pay attention to the orientation of the notch and pressing tray.
❖Information
Note the following points, otherwise handling the au Nano IC
Card (LTE) may cause malfunction or damage.
IC Do not touch the IC (metal) part of the au Nano IC Card (LTE).
Insert in the correct direction.
Back
Do not use force to attach or remove.
Notch
Do not lose the au Nano IC Card (LTE) after it has been
removed.
Tray
Attaching/Removing microSD memory card
Attaching microSD memory card
1
Open the microSD memory card/au Nano IC Card (LTE)
slot cover while hooking the groove with your fingernail
4
Close the microSD memory card/au Nano IC Card (LTE)
2
Check the orientation for inserting, and insert it until it
slot cover, press it firmly to ensure that there are no
clicks
gaps between the cover and the main unit
Insert the microSD memory card with the contact side down.
Removing au Nano IC Card (LTE)
1
Open the cover while hooking the groove of microSD
memory card/au Nano IC Card (LTE) slot cover with
your fingernail
2
Hook the projection of the tray with your fingernail to
slide the tray straight out, then remove the tray from the
main unit
3
Remove au Nano IC Card (LTE) out of the tray, insert the
tray into the main unit and then press it all the way
Pay attention to the direction of pushing the tray.
i j
3
When charging is complete, remove the microUSB plug Force-quitting
of the microUSB cable from the product and close the
1
Open the microSD memory card/au Nano IC Card (LTE)
microUSB connection terminal cover firmly
slot cover while hooking the groove with your fingernail,
4
Remove the USB plug of the microUSB cable from the
press the OFF button (YELLOW) with a fine-tipped object
USB port of the PC
for approximately three seconds, and release your finger
after it vibrates three times
Turning on (Initial settings)
Turning the power on
1 P (over 1 sec)
The product vibrates and after a while the lock screen
appears.
When you turn on the product for the first time, follow the
onscreen instructions to set the initial settings.
2
Swipe (flick) the screen up/down/left/right
Turning the power off ❖Information
Pressing the OFF button (YELLOW) by a sharp object such
1 P (over 1 sec)
as needle may cause malfunction.
2
[Power off] [OK]
Alternatively, press and hold P and upper part of the
❖Information
volume key at the same time for approximately three
Press P for over 1 second and long-touch "Power off" u seconds, and release your finger after it vibrates three times.
[OK] to restart the product in safe mode (a function that
enables to start the product in a status equivalent to the
status at the time of purchase).
p q
Refer to the Japan Meteorological Agency web page for details
about distribution of Earthquake Early Warning.
http://www.jma.go.jp/
You cannot receive Emergency Rapid Mail when your cell
phone is turned off or during a call.
Emergency Rapid Mail may not be received when your cell
phone is communicating such as while sending/receiving
SMS/e-mail or using the browser, or if you are in a place where
(au Disaster Countermeasure) menu [
signal does not reach even in the service area (e.g. in a
(Emergency Rapid Mail)]
tunnel, basement) or in a place with a poor reception.
You cannot receive the Emergency Rapid Mail that the
reception is failed.
This delivery system is different from Earthquake Early
Warning provided through TV, radio, or other communication
procedures, which means that the time the Earthquake Early
" (It is an earthquake)), and vibration.
Warning arrives may vary.
Information from someplace other than your current location
may be received.
Using
Messaging Service)
Disaster Voice Messaging Service is a service which allows
you to record your voice and send someone you want to
inform your well-being in case of a large-scale disaster.
1
au (au Disaster Countermeasure) menu [
(Disaster Voice Messaging Service)]
❖Information
®
To use Wi-Fi , initial settings via 4G (LTE/WiMAX 2+)/3G
network is required.
Voice message can be recorded for up to 30 seconds.
Voice messages cannot be saved or played if the product
does not have available memory.
d
3
Close the microSD memory card/au Nano IC Card (LTE)
slot cover, press it firmly to ensure that there are no
gaps between the cover and the main unit
❖Information
Insert a microSD memory card in the appropriate direction.
Inserting a microSD memory card forcefully into the slot
could result in failure to remove the microSD memory card
or damage.
Do not touch the terminal of the microSD memory card.
Removing microSD memory card
Be sure to unmount microSD memory card before removing.
1
From the Home screen, [ ]u[Settings]u[Storage]u
[Unmount SD card]u[OK]
When it is unmounted, " SD card safe to remove"
appears on the status bar to notify you that reading and
writing from/to the microSD memory card are disabled.
2 Open the microSD memory card/au Nano IC Card (LTE)
slot cover while hooking the groove with your finger
3
Press the microSD memory card all the way until it
clicks, then pull out the microSD memory card slowly
" Removed SD card" appears on status bar to inform
that the microSD memory card is removed.
4
Close the microSD memory card/au Nano IC Card (LTE)
slot cover, press it firmly to ensure that there are no
gaps between the cover and the main unit
microSD memory card
k
Initial settings
When you turn on the product for the first time, follow the
onscreen instructions to set language, functions, service, etc.
For details, refer to "Setting Guide".
❖Information
To change the language later, from the Home screen, [
[ (Settings)] [ (Language & input)] [
(Language)]. To make settings, from the Home
screen, [ ] [Settings] [Setup guide]. To make settings
for au service etc., from the Home screen, [
Groove
(Customer support)] [au Easy Setting].
OFF button (YELLOW)
Screen Lock
When the screen lock is set, the backlight turns off to avoid
the keys and touch panel from false operations.
When the specified time elapses, the product's screen
backlight turns off automatically and screen lock is activated.
1 While the screen is displayed, P
Unlocking screen
The lock screen appears when turning the power on or the
backlight on by pressing P.
1
Swipe (flick) the screen up/down or left/right on the lock
screen
❖Information
On the lock screen, long-touch "
activate the camera.
r
Using (Disaster Information)
You can check history of Disaster and Evacuation Information
delivered by local government, disaster information portal, etc.
1
au (au Disaster Countermeasure) menu [
(Disaster Information)] Follow the onscreen
instructions
Do you have everything?
Before your start using the product, make sure that you have
all the following packaged with the product.
™ *1 *1
Xperia Z3 Desktop Holder (SOL26PUA)
(Disaster Voice
Attachment 45B
Sony Mobile TV antenna cable 02
02SOHSA
*1 Including warranty
(Instruction Manual) (Japanese)
Xperia ™ Z3 (Cautions on using
™
Xperia Z3) (Japanese)
(Setting Guide) (Japanese)
The following items are not included in the package.
microSD memory card AC adapter
Earphones microUSB cable
e f
Charging
When you purchase your product, the internal battery is not
fully charged. Charge the battery before use.
❖Information
When the charging starts, notification LED lights according to
the battery level. To check the battery level, see the status bar in
the top of the Home screen. Alternatively, from the Home screen,
[ ] [Settings] [About phone] [Status] and see "Battery
level".
When you start charging with the product powered off, the
power turns on even though operation is not available. Follow
the instructions of each airline or medical facility for the use of
cell phones on their premises.
It may take longer to complete for charging with a PC or
while using the camera function.
You cannot charge the battery by connecting the Desktop
Holder to a PC.
Be sure to attach the supplied attachment to the Desktop
holder when charging. If the product is installed without the
attachment attached, charging fails.
Attachment 45A is attached to the Desktop Holder by
default.
Attachment 45B only supports terminal covers
(commercially available) with "
(Compatible with genuine desktop holders)" mark or "
(Compatible with desktop holders)" mark and the
terminal can be charged on the Desktop Holder with a
compatible cover (commercially available) attached.
Charging with the Desktop Holder
Charging with the supplied Desktop Holder (SOL26PUA) and
Common AC Adapter 05 (sold separately) is explained.
l m
Basic Operation
Key icons
The followings are the main functions of x, y, r
]
keys located at the bottom of the screen.
] [
x x y r
x Return to the previous screen. Close a dialog
box, menu, or the Notifications panel.
Back
y
Display the Home screen.
Long-touch and drag it to " " to activate
Home
"What's New" app or drag it to " " to activate
"Google" app.
r Display recently used apps on a list and
activate or delete them from the list. Also, you
Recently
can use and set small apps.
used apps
" and drag it to " " to
s t