Trouble Shooting PROBLEM CAUSE SOLUTION Check whether power fuse Change fuse same as the old one melt or not Cannot power on Some factors cause MPU Press [RES] button on the panel by wrong operation penpoint, then, power on After ignition switch Change battery or fuse off, setting information Reset information and save...
Call Log CONTENTS By operating buttons or appropriate Touch button to access call log interface panel button this function can also be To use this product safely and properly, be sure to read this manual carefully before use and keep it which keeps records of received call, missed achieved.
Precaution BT Function Operation Dial/Answer/Switch/Hand-up Enter/Exit Safety Dial Touch BT icon on the main interface to enter BT To ensure driving safety, please follow the guide given below: After successful linking between the phone and interface: 1.The unit is installed in car with 12V power supply. unit, input phone number by touching number 2.Connect each wire as the manual suggests, any wrong connection may cause dysfunction or button on the screen, then touch...
MP3 Function Operation Pause World’s Area Codes In the MP3 file, Touch button on the As the below map shows, we set area codes for DVD player according to various countries and After inserting SD card, U disc or the MP3 remote control to switch between play and regions.
Panel function description Then insert the serial number of title and Back rearview switch chapter by using number button on the remote When you are backing the car, the unit will control and up/down/left/right button, move automatically switch to back mode; after backing the cursor to [PLAY], press ENTER button on the system will switch to its previous running the control to complete programmed play.
Page 7
DVD/VCD/CD Function Operation Panel function introduction In DVD mode, touch the top of the screen Repeat Playback PWR/VOL button function menu will be displayed as follows: In DVD mode, press[ RPT] button on the remote Press this button will turn on power, during working longer press this button will turn control to start repeating function of the off power, on any mode, shortly press will return main menu, rotate this button will following contents:...
Remote Control Function Radio Function Operation Band switch Touch the [ ] button on the screen to switch 6. SEEK Touch [RADIO] icon to enter the radio interface band in the following sequence. as below. In playback mode, short press the button to access FM1 →...
Page 9
7. Video Setup Time setup 15. 0-10+ ENTER Touch [VIDEO ]icon to enter the interface Touch [TIME] menu in the main interface to In radio mode, press the button to select pre- In DVD mode, press the button to move the below.
Reset Device Sound Effect Setup 2. Sound Setup 5. Screen Calibration Touch [VOLUME] icon to enter the sound setup Touch [ADJUST] icon to enter the Screen If the unit or its connected device does not work Press [SEL] button on the remote control or interface: Calibration setup interface.
Need help?
Do you have a question about the DD-7205BT and is the answer not in the manual?
Questions and answers