1. Manuals
  2. Brands
  3. Klutch Manuals
  4. Rotary Hammer
  5. Rotary Hammer
  6. Owner's manual

Klutch Rotary Hammer Owner's Manual

Klutch rotary hammer owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

ROTARY HAMMER
OWNER'S MANUAL
!
WARNING:
Read carefully and understand all INSTRUCTIONS before
operating. Failure to follow the safety rules and other basic
safety precautions may result in serious personal injury.
Item # 1433840
0710

Advertisement

Table of Contents
loading

Summary of Contents for Klutch Rotary Hammer

  • Page 1 ROTARY HAMMER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 1433840 0710...

  • Page 2: Intended Use

    For technical questions please call 1-800-222-5381. INTENDED USE The Rotary Hammer Drill is specifically designed for fast impact drilling of anchor holes and through holes for concrete and masonry. TECHNICAL SPECIFICATIONS...

  • Page 3: Work Area

    WORK AREA • Keep work area clean and well lit. Cluttered and dark work areas can cause accidents. • Do not use your tool where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gasses, or dust. Power tools create sparks, which may ignite the dust or fumes.
  • Page 4 TOOL USE AND CARE • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired by an authorized service representative.

  • Page 5: Operation

    OPERATION BEFORE ATTACHING OR REMOVING ANY ACCESSORIES BE SURE TO DISCONNECT THE HAMMER DRILL FROM THE POWER SUPPLY.
  • Page 6 Fitting and changing tools (Fig.2) The device is equipped with a SDS-plus attachment system. • Clean tools and grease with a thin layer of machine grease before fitting. • Pull back fastening sleeve (A, Fig.2) and hold. • Push and rotate the dust-free tool into the tool holder as far as it will go. The tool will lock automatically.

  • Page 7: Maintenance

    Handle attachment (Fig.4) For safety reasons, only use the hammer drill with handle attachment. You will be able to achieve a safe body position during operation by rotating the handle attachment. Loosen and turn the handle attachment in counterclockwise direction. Then tighten the handle attachment.

  • Page 8: Parts Drawing

    PARTS DRAWING...

  • Page 9: Parts List

    PARTS LIST...

This manual is also suitable for:

1433840

Table of Contents