Advertisement
Attachthe washer'shose coupler
to the faucet (see Illustration-C).
I
Illustration C. Grasp whitering on
imse couplerandpu[[ it down. Slip
hose coup[eroverfaucet adapter
ad release whitering. Z$is will
cotmect hose coupler tofaucet
(idapt(?t:
To test the water temperature,
press the red button on the side of
the adapter. At the end of the wash
~J/cIe tul.tloff f;ium+,
pressred
button again to rclicvcpressure
and eiiminate splashing. Do not
disccmncctflosecoupler until
pressure is relieved.
Set Hwshtemperature at faucet.
I.Vashcr d rains into sink. Be sure
sink drain is open to prevent
iwcrfjowillg, 131cnd h ot and cold
iviltcrin
LXlUd
parts for
WARM
WASH, A fter
wash
agitationhas
s(;~rhxl, c h:ingcfaucet settings for
j'(mrri}l.sc
water
[mpcraturc. Bc
sure to plug wushcr into a propcrly-
~tr{)ll[l~l~~i
thrcc-prong rtxcptac]c.
Suc ymfr Iflstalltitim Iflstrlfctiofls.
~
Push Cycle Selectorinandtum
clockwiseto your selectedwash
cycle.
@ Pull Cycle Selectorout to start
the cycle.If you wish to change
cyclesettingafler washerhas
started, push Cycle Selectorin and
wait for washer to stop. Then reset
to the new position. Settingcan be
changed at any time during the
cycle.
Delicatecycle
To get the full benefit of the
Delicate Cycle, alwaysset it at
the beginningof the cycle. During
wash, the Delicate Cycle alternates
between agitation and pauses to
protect delicate clothes.
Howto soak in
YourWasher
SetWASH/R.INSE T EMPERATURE
at WARM/WARM (MANUAL)and
adjust faucetsfor desired soak
temperature. Add detergentor soak
agent. Turn Cycle Selectorto
desired cycle. Start the washer.
After washer fills and beginsto
agitate,push in the CycleSelector
to stop washer. Allowto soak for as
long as desired. After desired soak,
turn to the last Spin. Pull out the
CycleSelectorto completethe cycle.
-—–-
sst&s?-
—.
-—!
Advertisement
