D-Link DIR-605L Quick Install Manual page 2

Configuration
There are two ways to configure your router:
A. Web Browser - Use a web browser from your computer.
B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app.
Refer to the QRS Mobile Setup section for more information.
A. Web Browser Configuration
1 Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter http://dlinkrouter.local. /. You can also enter the IP address of the
router (http://192.168.0.1).
2 When the Welcome screen appears, select your language and then click
Start to continue.
3
Select Auto Detect and click Next to continue.
The router will automatically detect the type of connection are you using.
4
If you have selected Manual Setup or if the router did not detect your
Internet connection, select the Internet type from the Internet Connection
drop-down menu.
DSL (PPPoE) users enter your PPPoE user name and password supplied by
your ISP. If you do not know this information, please contact your ISP.
Under Wireless Settings, enter a name for your wireless network (also called
5
SSID or Wi-Fi Network name). Then, next to Security Mode, select AUTO-WPA/
WPA2 (recommended). Enter a network key (also know as a passphrase or
Wi-Fi Password).
You may check the Auto generate network key box to have the router
create a password for you.
Click Next to continue. Your router will now reboot for about 30 seconds.
Continue with the Setup Wizard to finish configuring your DIR-605L router.
6
Note: Setting up "mydlink" is optional and not required for the router to function.
Congratulations! You have completed the router installation.
B. QRS Mobile Setup
Scan the code below or search "QRS Mobile" (App Store or Google Play) to
1
download the QRS Mobile App to your iPhone, iPad, or Android device.
iOS Android QRS Mobile App
2 Once your app is installed, you may now configure your router. Connect
to the router wirelessly by going to your wireless utility on your device.
The default Wi-Fi Network is dlink. Select it and connect.
Note: By default, the DIR-605L does not have any wireless security enabled. It
is strongly suggested to enable security and create a Wi-Fi Password during the
setup wizard to secure your wireless network.
3 Once connected, click on the QRS Mobile icon from your mobile device,
then click Start to continue. Please follow the on-screen instructions to
complete the setup.
4 Once the Setup Complete screen appears, click Save and write down the
new Wi-Fi Network name and password for future reference.
Note: To reconnect to your router, launch your wireless utility, select the new
Wi-Fi Network you created, and then enter your new Wi-Fi password.
Troubleshooting
How do I connect my wireless devices to the DIR-605L router?
1. Open your wireless network utility that displays available wireless networks.
2. Select the Wi-Fi Network name you assigned in the wizard and connect.
Note: If you did not run the setup wizard or you reset the router to its default
settings, the default Wi-Fi Network name is dlink with no password.
You can also connect using WPS:
1. Press the WPS button on the DIR-605L for three seconds.
2. Within one minute press the WPS button on your wireless device.
3. Allow up to two minutes to connect.
Note: Some devices may require you to log in to a utility to start the WPS process.
Refer to the user manual of the device you want to connect to the router if you do
not know how to start the WPS process.
How do I change the wireless settings on the DIR-605L router?
1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter http://dlinkrouter.local./. You can also enter the IP address of the
router (http://192.168.0.1).
2. At the login screen, type in admin for the user name and enter the router
password you created in the wizard (no password by default).
3. Go to Setup > Wireless Settings > Manual Wireless Network Setup to
create a new Wi-Fi network name (SSID) and Wi-Fi password.
Documentation available at http://www.dlink.com/DIR-605L.
Technical Support
Having trouble installing your new product? D-Link's website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website or by phone.
United States Canada
Telephone: (877) 453-5465 Telephone: (800) 361-5265
Internet: http://support.dlink.com Internet: http://support.dlink.ca
Copyright ©2013 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and other countries. iPhone, iPad, and iPod touch are registered trademarks of Apple
Inc. Android is a trademark of Google, Inc. Other trademarks are the property of their respective owners. Maximum wireless signal rate
derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput
rate. Environmental factors will adversely affect wireless signal range. Product specifications, size and shape are subject to change
without notice, and actual product appearance may differ from that depicted on the packaging. Visit www.dlink.com for more details.
GPL Code Statement
This D-Link product includes software code developed by third parties, including
software code subject to the GNU General Public License ("GPL") or GNU Lesser
General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL,
and information on obtaining access to the GPL code and LGPL code used in this
product, are available to you at:
http://tsd.dlink.com.tw/GPL.asp
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WARRANTY and is subject to the copyrights of one or more authors. For details,
see the GPL code and the LGPL code for this product and the terms of the GPL and
LGPL.
Written Offer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such software,
D-Link will provide upon written request via email and/or traditional paper mail
the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to
cover shipping and media charges as allowed under the GPL and LGPL.
Please direct all inquiries to:
Email:
GPLCODE@dlink.com
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html
Version 2.1 | March 20, 2013