Sharp LC-22LE320 Service Manual page 49

Alignment method:
Initial Set-up:
1. Select source as "PC".
2. Set Contrast = 58 (Sharp) and Brightness=100 (Sharp) , at normal menu mode.
3. Apply "5 white block"(pattern-1) pattern by VGA pattern generator.
4. Enter factory mode menu: press MENU + Numeric keys "1999" (factory mode menu).
Alignment:
At factory mode menu, select AUTO_COLOR item. Then press "OK" key to adjust ADC_GAIN_R, ADC_GAIN_G, ADC_GAIN_B and
ADC_OFFSET_R, ADC_OFFSET_G, ADC_OFFSET_B. Then store those values to NVM.
Set Contrast = 100 (Sharp) and Brightness=100 (Sharp)
Check color temperature specification with PC mode.
Color temperature Normal/Warm/Cool (x, y) co-ordinates specification:
Picture Mode
Cool (12000K)
Normal (9000K)
Warm (6500K)
Table 5: Reading with
Note:
1. Use Knoica Minolta CS-200. for color coordinates and luminance check.
2. For suitable mass production at factory, colour analyzers CA-210 can be applied. But, befor measureing ,all CA-210 should be coordinates
and proofread with a Charoma Meter (CS-200) or equivalent instrument and a reference TV set.
3. Check the luminance in the center of the screen with 100% White. And to Brightness control at 100; Contrast control at 100
2
Luminance > 200 cd/m
2
> 200 cd/m
2
> 360 cd/m
2
> 360 cd/m
> 360 cd/m2 (Typ.) [ For LC-37LE320E/RU only at color temp.- cool mode ]
> 360 cd/m2 (Typ.) [ For LC-42LE320E/RU only at color temp.- cool mode ]
2008-03-14
LC-19LE320, LC-22LE320, LC-26LE320, LC-32LE320, LC-37LE320, LC-42LE320
Pattern-1
x
0.272±0.010
0.289±0.015
0.314±0.015
Knoica Minolta
(Typ.) [ For LC-19LE320E/RU only at color temp.- *warm mode ]
(Typ.) [ For LC-22LE320E/RU only at color temp.-*warm mode ]
(Typ.) [ For LC-26LE320E/RU only at color temp.- cool mode ]
(Typ.) [ For LC-32LE320E/RU only at color temp.- cool mode ]
y
0.277±0.010
0.291±0.015
0.319±0.015
CS-200.
49