Sony Trinitron KV-29FX66E Service Manual

Sony Trinitron KV-29FX66E Service Manual

Ae-6b chassis
Hide thumbs Also See for Trinitron KV-29FX66E:

Advertisement

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:
MODEL
KV-29FX66E
KV-29FX66K
ORIGINAL MANUAL ISSUE DATE: 8/2001
ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL ARE APPENDED TO THE END OF THE PDF FILE.
REVISION DATE
9-927-410-01
COMMANDER
RM-934
RM-934
REVISION TYPE
No revisions or updates are applicable at this time.
1
AE-6B
DEST
CHASSIS NO.
ESP
SCC-Q81B-A
OIRT
SCC-Q82A-A
SUBJECT
CHASSIS

Advertisement

Table of Contents
loading

Summary of Contents for Sony Trinitron KV-29FX66E

  • Page 1 HISTORY INFORMATION FOR THE FOLLOWING MANUAL: AE-6B CHASSIS MODEL COMMANDER DEST CHASSIS NO. KV-29FX66E RM-934 SCC-Q81B-A KV-29FX66K RM-934 OIRT SCC-Q82A-A ORIGINAL MANUAL ISSUE DATE: 8/2001 ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL ARE APPENDED TO THE END OF THE PDF FILE. REVISION DATE REVISION TYPE SUBJECT...
  • Page 2: Service Manual

    SERVICE MANUAL AE-6B CHASSIS MODEL MODEL COMMANDER DEST CHASSIS NO. COMMANDER DEST CHASSIS NO. KV-29FX66E KV-29FX66K RM-934 SCC-Q81B-A RM-934 OIRT SCC-Q82A-A KV-29FX66 RM-934 - 1 -...
  • Page 3: Table Of Contents

    TANCE CRITIQUE POUR LA SÈCURITÈ DU FONCTIONNEMENT, THESE COMPONENTS WITH SONY PARTS WHOSE PART NE LES REMPLACER QUE PAR DES COMPSANTS SONY DONT NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN LE NUMÈRO DE PIÈCE EST INDIQUÈ DANS LE PRÈSENT SUPPLEMENTS PUBLISHED BY SONY.
  • Page 4 l l a . s l . s l . s l . s l . s l e i l t c i n i l , P I i n i y t i - 3 -...
  • Page 5: Connectors

    21 pin connector Pin No Signal Signal level Audio output B Standard level : 0.5V rms (right) Output impedence : Less than 1kohm* Audio output B Standard level : 0.5V rms (right) Output impedence : More than 10kohm* Audio output A Standard level : 0.5V rms (left) Output impedence : Less than 1kohm*...
  • Page 6: Self Diagnostic Software

    AE-6B SELF DIAGNOSTIC SOFTWARE The identification of errors within the AE-6B chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous flashing LED) and then communicate with each device in turn to establish if a device is faulty.
  • Page 7: Switching On The Tv And Automatically Tuning

    Switching On the TV and Automatically Tuning The Auto Tuning menu appears on the screen. Press the Do you want to start OK button to select Yes. automatic tuning? The first time you switch on your TV, a sequence of menu screens appear on the TV ena- bling you to: 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) adjust the picture slant 4) search and store all available channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the...
  • Page 8: Menu Guide

    “Off” and vice versa. Live (for live broadcast programmes, DVD The “BBE High Definition Sound system” is manufactured by Sony Corporation under license and Digital Set Top Box receivers). from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. Teh word Movie (for films).
  • Page 9 Level 1 Level 2 Level 3 / Function Level 1 Level 2 Level 3 / Function SLEEP TIMER PROGRAMME SORTING Picture Adjustment Picture Adjustment The “Sleep Timer” option in the “Timer” menu Mode: Personal The “Programme Sorting” option in the “Set Contrast Mode: Personal Brightness...
  • Page 10: Teletext

    Remote Control Configuration for VCR/DVD Teletext This remote control is default to operate basic functions of this Sony TV, Sony DVD and most of Teletext is an information service transmitted by most TV stations. The index page of the Sony VCR when batteries are initially installed. To control other VCR and DVD major brands teletext service (usually page 100) gives you information on how to use the service.
  • Page 11: Specifications

    • Replace the batteries. 4 audio input – phono jacks The standby indicator on the TV • Contact your nearest Sony service centre. headphones jack flashes. Design and specifications are subject to change without notice. If you continue to experience problems, have your TV serviced by qualified personnel.
  • Page 12: Disassembly

    SECTION 2 DISASSEMBLY 2-1. Rear Cover Removal 2-2. Speaker Connector Disconnection => <= => <= Remove the rear cover fixing screws indicated. Take care Before completely removing the rear cover disconnect the when removing the rear cover not to damage the speaker speaker connector which is located on the inside.
  • Page 13: Service Position

    2-4. Service Position 2-5. D and G Board Removal Clips To remove the G Board release the clips circled and ease the Position the chassis as indicated to access the solder side. board gently away from the support bracket. Removal of the To gain access to the underside of the boards follow the D Board follows the same procedure.
  • Page 14: Side Control Module Removal

    2-8. Side Control Module Removal 2-9. H2 Board Removal Screws Clips Remove the two screws fixing the user control module to the To remove the H2 Board release the two clips circled and ease side of the set. The control module can then be removed by the board gently away from the support bracket.
  • Page 15: Picture Tube Removal

    2-12. Picture Tube Removal WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT coated earth ground strap.
  • Page 16 REMOVAL AND REPLACEMENT OF THE MAIN BRACKET For safety reasons, on no account should the plates be removed and not refitted after servicing. BOTTOM PLATES. (1) REMOVING THE PLATES (2) REFITTING THE PLATES In the event of servicing being required to the solder side of the D Board printed wiring board, Because the plates differ in size it is important that the correct plates are refitted in their original the bottom plates fitted to the main chassis bracket require to be removed.
  • Page 17: Set-Up Adjustments

    SECTION 3 SET-UP ADJUSTMENTS • When complete readjustment is necessary or a new picture tube Carry out the adjustments in the following order : is installed, carry out the following adjustments. 3-1. Beam Landing. • Unless there are specific instructions to the contrary, carry out 3-2.
  • Page 18: Convergence

    Fig.3-4 Align both Purity Purity magnets Purity control magnets magnets to the vertical position Align pips on each magnet 3-2. Convergence (1) Screen centre convergence [Static convergence] Input a dot pattern signal from the pattern generator. Normalize the picture setting. [Moving vertically], adjust the V.STAT magnet so that the vertical red, green and blue dots coincide at the centre of the screen.
  • Page 19 Correction for HMC [Horizontal mis-convergence] and VMC HTIL correction can be performed by adding a THL correction [Vertical mis-convergence] by using the BMC [Hexapole] assembly to the Deflection yoke. magnet. a). HMC correction by BMC [Hexapole] magnet and movement of the electron beam.
  • Page 20: Focus Adjustment

    Layout of each control 3-3. Focus Adjustment Receive a television broadcast signal. Normalize the picture setting. Purity magnet Adjust the focus control located on the flyback transformer to BMC (Hexaploe) magnet obtain the best focus at the centre of the screen. V STAT convergence magnet Bring only the centre area of the screen into focus, the magenta- Y-splitting axis correction magnet...
  • Page 21: Electrical Adjustments

    SECTION 4 CIRCUIT ADJUSTMENTS 4-1. Electrical Adjustments Service adjustments to this model can be performed using the supplied remote Commander RM-934. Programming the Remote Commander for Operation in Service Mode Press the VCR/TV/DVD button until the TV LED lights. Press and hold the yellow button for approx.
  • Page 22 Sub Brightness Adjustment Input a Monoscope pattern. Program the Remote Commander for operation in Service Mode. [ See Page 20 ]. Press ‘VIDEO’ ‘VIDEO’ 13 on the Remote Commander. Adjust the ‘Sub-Brightness’ data so that there is barely a difference between the 0 IRE and 10 IRE signal levels. Sub Contrast Adjustment Input a video signal that contains a small 100% white area on a black background.
  • Page 23: Test Modes 1 And 2

    Deflection System Adjustment 4-3. TEST MODE 2: Program the Remote Commander for operation in Service Mode. Test Mode 2 is available by rogramming the Remote Commander for [ See Page 20 ] and enter into the ‘Geometry’ service menu. operation in Service Mode [ As shown on Page 20 ] then pressing the Select and adjust each item in order to obtain the optimum image.
  • Page 24: Block Diagrams (1)

    5-1. BLOCK DIAGRAMS (1) CN7444 QP (-) CN7442 QP (-) QP (+) TO A BOARD QP (+) QP (-) VM AMPLIFIER CN7000 BUFFER Q7400 QP (+) VM AMPLIFIER VM AMP BUFFER Q7403 OUTPUT Q7406 VM AMPLIFIER BUFFER Q7401 VM AMPLIFIER VM AMP BUFFER Q7405 OUTPUT Q7407...
  • Page 25: Block Diagrams (2)

    5-1. BLOCK DIAGRAMS (2) TO A BOARD 6dB AMPLIFIER TO D BOARD SHEET1 FOR THE FV (T6804) SELECTABLE OUTPUT CVBS PART OF J7375 IC7300 (3RD SCART) OVERVOLTAGE VIDEO OUT (RED) CN7301 Q3202 PROTECTION Q5816 CN6200 6dB AMPLIFIER FOR THE TO G BOARD SELECTABLE V OUT 3 CN6008...
  • Page 26: Block Diagrams (3)

    5-1. BLOCK DIAGRAMS (3) DF DRIVE Q8851 COMPARATOR IC8103 CN8810 V STAT DF DRIVE T8852 TO A BOARD CN5002 H CENTRE DY ASSY CN8611 M PIN CONT V- DY+ CN8620 V- DY- V DY DF PARA MP PARA Q8201, H DY 8202,8118 H- DY- H LIN...
  • Page 27: Block Diagrams (4)

    5-1. BLOCK DIAGRAMS (4) 5-2. CIRCUIT BOARD LOCATION Reference Information RESISTOR : METAL FILM COMPARATOR : SOLID (AV-LINK CIRCUIT) IC0004 C Board FPRD : NON FLAMMABLE CARBON FUSE : NON FLAMMABLE FUSIBLE : NON FLAMMABLE METAL OXIDE VM Board : NON FLAMMABLE CEMENT G Board : NON FLAMMABLE WIREWOUND CVM Board...
  • Page 28 A Schematic [ Video & Audio Processors, Audio Output, Vertical Deflection] page 1/2~ - 27 -...
  • Page 29 A Schematic [ Video & Audio Processors, Audio Output, Vertical Deflection] page 2/2~ - 28 -...
  • Page 30 A Printed Wiring Board Conductor side A ~ - 29 -...
  • Page 31 A Printed Wiring Board Conductor side B ~ - 30 -...
  • Page 32 VM Printed Wiring Board Conductor side ~ ~ VM Board Waveforms ~ ~ VM Board Voltage Table ~ 5ms/div 5ms/div 5ms/div 1.54 Vp-p (H) 1.4 Vp-p (H) 20 Vp-p (H) ~ A Board Location Table (A Side) ~ ~ A Board Location Table (B Side) ~ - 31 -...
  • Page 33 ~ A Board Semiconductor Voltage Table ~ ~ A Board IC Voltage Table ~ - 32 -...
  • Page 34: Vm Board Schematic

    H1 Board Schematic Diagram ~ H2 Board Schematic Diagram ~ F4 Board Schematic Diagram ~ VM Board Schematic Diagram ~ - 33 -...
  • Page 35 ~ G Board Semiconductor Location Table ~ ~ G Printed Wiring Board Conductor side ~ ~ H1 Printed Wiring Board Conductor side ~ ~ H2 Printed Wiring Board Conductor side ~ Note : Portions of the circuit contained within the marked areas as shown have high voltages present.
  • Page 36 G Schematic [ Power Supply ] ~ - 35 -...
  • Page 37 D Schematic [ Deflection ] ~ - 36 -...
  • Page 38 D Printed Wiring Board Conductor side ~ D Board Waveforms ~ D Board IC Voltage Table ~ D Board Semiconductor Voltage Table ~ 10us/div 10us/div 10us/div 10us/div 10us/div 2.44 Vp-p (V) 148 Vp-p (V) 2.36 Vp-p (H) 152 Vp-p (H) 1.12 kVp-p (H) 10us/div 10us/div...
  • Page 39: C Board Schematic

    ~ C Board Schematic [ R-G-B Out ] ~ - 38 -...
  • Page 40 ~ C Printed Wiring Board Conductor side ~ M Printed Wiring Board (A) side ~ ~ C Board Waveforms ~ 10us/div 10us/div 2.16 Vp-p (H) 2.0 Vp-p (H) M Printed Wiring Board (B) side ~ 10us/div 10us/div 1.9 Vp-p (H) 6.8 Vp-p (H) ~ C Board Semiconductor Voltage Table ~ ~ C Board IC Voltage Table ~...
  • Page 41 M Schematic [ Micro Processor ] ~ - 40 -...
  • Page 42: Semiconductors

    5-4. SEMICONDUCTORS CXAB070AP PST573IMT LM318P MCZ3001D LM358N LM393DT LM393N M24C16-MN6T(A) CXA1875AM-T4 SAA5665HL/M1D/0358 LM78L05ACZ ( TOP VIEW ) CXA2100AQ-TL SBX3081-51(30) MSP3411G-QA-B10 (TOP VIEW) ( TOP VIEW ) SDA9488X-B23GEG K6T2008V2A-YF70T00 NJM3404AD-W UPC4558G2 ( TOP VIEW ) LA6500-FA PQ30RV11 STV9379 1 : V IN 2 : V OUT 3 : GND 4 : ON/OFF CONTROL...
  • Page 43 DTA144EK SE135N-LF4 DTC144TKA-T146 2SA1162-G SENSE 2 COLLECTOR 3 GND TDA6111Q/N4 DTA144ESA 2SA933AS-QT 2SC2785-HFE 2SA1837(LBS2S0N) TDA7497 L7809CV/LSY STP5NB40FP STP5NB40(030Y) 2SC5698-CA 2SB734-34 2S5696-SONY-CA VPS9402-A32GEG 2SC2688(5)-LK MSB709-RT1 MSD601-RST1 M1MA152WA-T1 UN2111 UN213 2SK2036(TE85L) (TOP VIEW) BA12T BAO33T BAS216 IRF614-005 RB705D IRF620 SPA07N60C2 2SA2005 2SC5511...
  • Page 44 BAS316-115 FBIU4D7MA-B MMDL914T1 RBV-406B UDZSTE-176.2B S1VB40 ANODE CATHODE BYV98-200-RAS 15/12 CATHODE GS1B460/45 ANODE D1NL20U EGP20G EL1Z GP08D UF4005PKG23 CATHODE TLHK5190 ANODE CATHODE ANODE D2S4MTA1 ERA38-06 MTZJ-T-77-22 ERA85-009 RD15ES-B2 HZS9.1NB2 RD39ES-B2 MTZJ-13B RD5.6ESB2 MTZJ-33B 1SS119-25 MTZJ-3.6A 1SS133T-77 MTZJ-4.7C CATHODE ANODE - 43 -...
  • Page 45: Diagrams

    5-5 IC BLOCK DIAGRAMS A BOARD IC6202/IC6207/IC6205 BA033T/BA12T REFERENCE VOLTAGE A BOARD IC1201 TDA7497 VOLUME OP AMP MUTE/STBY PROTECTIONS VOLUME OP AMP G BOARD IC6001 MCZ3001D Remote DVLD Internal Driver ref 5v Sel=34v 15v/8v Reg. 10v Level Shift Vsense Control Logic Latch Centre...
  • Page 46 A BOARD IC2000 MSP3411G SBUS Interface I2C Interface DEMODULATOR IDENT SCART Switching Facilities G BOARD IC6003 SE135N-LF4 A BOARD IC5301/IC5302 LM393TD A BOARD IC5400 STV9379 A BOARD IC5300 LM358N FLYBACK GENERATOR POWER AMPLIFIER THERMAL PROTECTION - 45 -...
  • Page 47: Exploded Views

    SECTION 6 EXPLODED VIEWS NOTE : Items with no part number and no description are not Items marked “*” are not stocked stocked because they are seldom required for routine since they are seldom required for service. routine service. Some delay should The construction parts of an assembled part are indicated be anticipated when ordering these with a collation number in the remarks column.
  • Page 48: Picture Tube

    6-2. Picture Tube REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK X-4200-730-1 BEZNET ASSY 52-55 *A-1638-158-A C BOARD, COMPLETE 4-205-720-02 POWER BUTTON 4-369-318-21 SPRING, TENSION 4-204-426-01 SPRING £ 1-424-887-11 COIL, DEGAUSSING 4-204-726-01 GUIDE, LIGHT 4-203-390-11 CUSHION, DGC 4-204-865-01 SHEET, BLOTTING *4-204-768-01 HOLDER, DGC (29”) 3-022-410-01 DAMPER £...
  • Page 49: Electrical Parts List

    SECTION 7 ELECTRICAL PARTS LIST PARTS LISTING TABLE OF CONTENTS Page H2 BOARD COMPLETE Parts List : ..................... 49 F4 BOARD COMPLETE Parts List : ..................... 49 H1 BOARD COMPLETE Parts List : ..................... 49 A BOARD COMPLETE Parts List : .....................
  • Page 50 H2 F4 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK < CONNECTOR > *A-1647-043-A H2 Board, Complete < CAPACITOR > CN6991 1-580-843-11 PIN, CONNECTOR (POWER) CN6992 *1-691-291-11 PIN, CONNECTOR (PC BOARD) 5P C2906 1-126-960-11 ELECT 20.00% 50V CN6993 1-695-915-11 TAB (CONTACT) C2907 1-126-960-11 ELECT 20.00% 50V...
  • Page 51 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK C1006 1-126-933-11 ELECT 100UF 20.00% 16V C2053 1-164-227-11 CERAMIC CHIP 0.022UF 10.00% 25V C1008 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V C2054 1-126-947-11 ELECT 47UF 20.00% 25V C1009 1-162-925-11 CERAMIC CHIP 68PF 5.00% 50V C2055 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50V...
  • Page 52 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK C2516 1-126-953-11 ELECT 2200UF 20.00% 35V C3230 1-164-489-11 CERAMIC CHIP 0.22UF 10.00% 16V C2517 1-126-960-11 ELECT 20.00% 50V C3231 1-164-489-11 CERAMIC CHIP 0.22UF 10.00% 16V C2518 1-126-960-11 ELECT 20.00% 50V C3232 1-164-489-11 CERAMIC CHIP 0.22UF 10.00% 16V C2519 1-126-959-11 ELECT...
  • Page 53 A F4 A REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK C5216 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50V C5890 1-164-227-11 CERAMIC CHIP 0.022UF 10.00% 25V C5217 1-136-165-00 FILM 0.1UF 5.00% 50V C5891 1-137-581-11 FILM 0.1UF 5.00% 100V C5218 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50V C5892 1-107-826-11 CERAMIC CHIP 0.1UF...
  • Page 54 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK C7060 1-164-222-91 CERAMIC CHIP 0.22UF D3001 8-719-929-15 DIODE HZS9.1NB2 C7061 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V D3003 8-719-929-15 DIODE HZS9.1NB2 C7062 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V D3005 8-719-929-15 DIODE HZS9.1NB2 C7063 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V D3007...
  • Page 55 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK < IC > L3008 1-216-295-91 SHORT L3009 1-216-295-91 SHORT IC2000 6-701-031-01 IC MSP3411G-QA-B10 L3010 1-216-295-91 SHORT IC2001 8-759-100-96 IC UPC4558G2 L3011 1-216-295-91 SHORT IC2500 8-759-831-56 IC TDA7497 L3012 1-216-295-91 SHORT IC3100 6-700-504-01 IC SDA9488X-B23GEG IC3200 6-700-505-01 IC VPS9402-A32GEG L3105...
  • Page 56 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK Q5201 8-729-010-29 TRANSISTOR MSD601-RST1 R1004 1-216-864-11 SHORT Q5202 8-729-045-04 TRANSISTOR 2SC5511 R1005 1-216-049-11 RES-CHIP 1/10W Q5203 8-729-044-59 TRANSISTOR 2SA1837(LBS2SON) R1006 1-216-051-00 RES-CHIP 1.2K 5% 1/10W Q5204 8-729-010-05 TRANSISTOR MSB709-RT1 R1007 1-414-813-11 FERRITE Q5205 8-729-010-05 TRANSISTOR MSB709-RT1 R1008...
  • Page 57 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK R2072 1-216-049-91 RES-CHIP 1/10W R3001 1-216-022-00 RES-CHIP 1/10W R2073 1-216-049-91 RES-CHIP 1/10W R3009 1-216-025-11 RES-CHIP 1/10W R2074 1-216-837-11 RES-CHIP 1/16W R3010 1-216-022-00 RES-CHIP 1/10W R2075 1-216-833-11 RES-CHIP 1/16W R3011 1-216-025-11 RES-CHIP 1/10W R2076 1-216-839-91 RES-CHIP 1/16W...
  • Page 58 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK R3305 1-216-025-11 RES-CHIP 1/10W R5210 1-216-845-11 RES-CHIP 100K 5% 1/16W R3306 1-216-025-11 RES-CHIP 1/10W R5211 1-216-845-11 RES-CHIP 100K 5% 1/16W R3312 1-216-825-11 RES-CHIP 2.2K 5% 1/16W R5214 1-208-798-11 METAL CHIP 4.7K 0.5% 1/10W R3313 1-216-825-11 RES-CHIP 2.2K 5%...
  • Page 59 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK R5327 1-216-472-00 METAL OXIDE R5881 1-216-833-11 RES-CHIP 1/16W R5328 1-216-033-00 RES-CHIP 1/10W R5882 1-216-833-11 RES-CHIP 1/16W R5331 1-216-033-00 RES-CHIP 1/10W R5883 1-216-859-11 RES-CHIP 1.5M 5% 1/16W R5332 1-208-806-11 METAL CHIP 0.5% 1/10W R5884 1-216-841-11 RES-CHIP 1/16W...
  • Page 60 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK R7096 1-216-803-11 RES-CHIP 1/16W FB0006 1-216-864-11 SHORT R7097 1-216-803-11 RES-CHIP 1/16W FB0007 1-216-295-91 SHORT R7098 1-216-803-11 RES-CHIP 1/16W FB0008 1-216-295-91 SHORT FB0009 1-412-006-31 INDUCTOR 10UH < VARIABLE RESISTOR > FB0010 1-216-295-91 SHORT RV5101 1-238-600-11 RES, ADJ, CARBON 10.0K FB0011...
  • Page 61 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK R0032 1-216-809-11 RES-CHIP 1/16W < CRYSTAL > R0033 1-216-809-11 RES-CHIP 1/16W R0034 1-218-725-11 RES-CHIP 1/16W X0001 1-578-774-11 VIBRATOR, CRYSTAL R0035 1-216-069-00 RES-CHIP 6.8K 5% 1/10W R0037 1-216-061-91 RES-CHIP 3.3K 5% 1/10W *A-1637-024-A G Board, Complete 4-382-854-01 SCREW (M3X8), P, SW (+) R0039 1-216-809-11 RES-CHIP...
  • Page 62 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK < CONNECTOR > < PHOTO COUPLER > CN6001 *1-691-291-11 PIN, CONNECTOR (PC BOARD) 5P PH6001 £ 8-749-016-21 IC TCET1103G CN6002 *1-508-786-00 PIN, CONNECTOR (5MM PITCH) 2P CN6003 *1-508-765-00 PIN, CONNECTOR (5MM PITCH) 3P <...
  • Page 63 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK R6048 1-215-481-00 METAL 330K 1% 1/4W C7360 1-163-113-00 CERAMIC CHIP 68PF 5.00% 50V R6049 1-208-805-11 METAL CHIP 9.1K 0.5% 1/10W C7378 1-162-116-00 CERAMIC 680PF 10.00% 2KV R6050 1-208-758-11 METAL CHIP 0.5% 1/10W C7379 1-162-114-00 CERAMIC 0.0047UF...
  • Page 64 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK R7328 1-216-824-11 RES-CHIP 1.8K 5% 1/16W C8109 1-126-947-11 ELECT 47UF 20.00% 25V R7329 1-202-565-81 RES-SOLID 1/2W C8113 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V R7330 1-215-903-11 METAL OXIDE C8114 1-126-964-11 ELECT 10UF 20.00% 50V R7331 1-535-143-61 LEAD, JUMPER (5.0MM) C8115...
  • Page 65 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK C8836 1-123-024-21 ELECT 33UF 160V D8857 8-719-110-41 DIODE RD15ES-B2 C8837 1-106-375-12 MYLAR 0.022UF 10.00% 250V D8858 8-719-081-97 DIODE MMDL914T1 C8840 1-165-176-11 CERAMIC CHIP 0.047UF 10.00% 16V C8841 1-126-947-11 ELECT 47UF 20.00% 25V <...
  • Page 66 Q8802 8-729-048-47 TRANSISTOR 2SC2688(5)-LK R8141 1-208-814-91 METAL CHIP 0.5% 1/10W Q8803 8-729-056-16 TRANSISTOR 2SC5698-CA R8142 1-208-803-11 METAL CHIP 7.5K 0.5% 1/10W Q8804 8-729-056-17 TRANSISTOR 2SC5696-SONY-CA R8143 1-216-825-11 RES-CHIP 2.2K 5% 1/16W Q8805 8-729-050-48 TRANSISTOR IRF614-005 R8144 1-216-841-11 RES-CHIP 1/16W Q8806...
  • Page 67 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK R8212 1-216-825-11 RES-CHIP 2.2K 5% 1/16W R8866 1-216-829-11 RES-CHIP 4.7K 5% 1/16W R8215 1-208-814-91 METAL CHIP 0.5% 1/10W R8867 1-216-829-11 RES-CHIP 4.7K 5% 1/16W R8216 1-208-812-91 RES-CHIP 0.5% 1/10W R8869 1-216-837-11 RES-CHIP 1/16W R8217 1-216-833-11 RES-CHIP...
  • Page 68 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK D7402 1-535-143-61 LEAD, JUMPER (5.0MM) R7427 1-216-025-11 RES-CHIP 1/10W D7403 8-719-991-33 DIODE 1SS133T-77 R7428 1-216-033-00 RES-CHIP 1/10W D7404 8-719-991-33 DIODE 1SS133T-77 R7429 1-216-033-00 RES-CHIP 1/10W D7405 8-719-924-11 DIODE MTZJ-T-77-22 R7432 1-216-065-91 RES-CHIP 4.7K 5% 1/10W D7406...
  • Page 69 D1 E REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK MISCELLANEOUS £ 1-571-433-31 SWITCH (AC POWER) £ 1-690-270-21 CORD, POWER (WITH CONNECTOR) 1-424-855-11 COIL, CHOKE 8-598-533-01 FRONTEND BTF-EC411 £ 1-453-340-31 TRANSFORMER ASSY, FLYBACK (NX-4522//Z2B4) 1-529-408-11 SPEAKER (4.2x24CM) 1-529-417-11 SPEAKER (8CM) 8-451-504-31 DEFLECTION YOKE (Y29RSC-S) 1-452-896-11 COIL, NA ROTATION (RT200) 8-453-011-41 NECK ASSY, (NA299-C)
  • Page 70 - 69 -...
  • Page 71 • User programmable Functional Check through Infrared • Fast and documented Test Mode setting of all Sony TV chassis Additional features such as Adjustments and Troubleshooting are available in chassis-dependent software modules. Please contact your local Sony Service organisation for the latest information.

This manual is also suitable for:

Trinitron kv-29fx66k

Table of Contents