Kodak EasyShare V705 User Manual page 55

Status
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device
Picture quality problems
Status
Picture is not clear
Picture is too dark
www.kodak.com/go/support
Solution
■
See Help in EasyShare software.
■
Adjust the camera Video Out setting to NTSC or PAL. (See the
"Customizing your camera" table starting on
■
Make sure the external device settings are correct. (See the
device's user's guide).
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens (page
■
Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject.
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Reposition the camera for more available light.
■
Use Fill flash (page
the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 53.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
60).
9) or change your position so light is not behind
Troubleshooting
page 32.)
49