Kodak EASYSHARE MD81 Extended User Manual page 50

Getting help
Picture quality problems
Status
Picture is not clear
Picture is too dark
Picture is too light
44
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens (see page
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Reposition the camera for more available light.
■
Use Fill flash (see page
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 46.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 46.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program and Panorama modes, adjust the Exposure
Compensation (see page
48).
7) or change your position so light is not
(see page 7).
25).
www.kodak.com/go/support