Kodak EASYSHARE MD30 Extended User Manual page 50

Troubleshooting
Picture quality problems
Status
Picture is not clear
Picture is too dark
Picture is too light
44
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens (see page
■
Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Use a larger picture size
■
If you're manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures
■
Reposition the camera for more available light.
■
Use Fill flash (see page
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range. (See
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
49).
(see page
(see page 31).
(see page
10) or change your position so light is not
Camera specifications, page
(see page 10).
Camera specifications, page
www.kodak.com/go/support
33).
32).
47.)
(see page
47.)
(see page
32).
32).