Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Matsui VX1200
Summary of Contents for Matsui VX1200
- Page 1 How to use your video...
-
Page 2: Safety Warnings
Safety Warnings Damage - Never use your VCR if it Temperature Your VCR is supplied with is damaged in any way. Always place Avoid extremes of temperature, either an approved 13 amp fused mains plug. When your VCR on a flat level surface hot or cold, place your VCR well replacing the fuse always avoiding anywhere which may be... -
Page 3: Playing A Video Tape
Playing a Video Tape Playing a tape Your VCR can playback video tapes recorded using Press the VCR ON button to switch your the NTSC colour system (TV VCR on. Insert a tape. If you insert a pre- system usually used in USA recorded video tape with the tab removed and Japan) on a PAL I TV (TV (for example a rented or bought film) your... -
Page 4: Removing Interference
Skipping channels/Removing Interference Skipping channels Sometimes during SET-UP you may Select the channel you want to skip. Press store more than the CANCEL button. The channel number will then flash in the top right of the TV one copy of the screen and in the VCR display. - Page 5 Selecting channels/Video Index Search Select VCR channel on TV The Video index search system If your VCR is in standby, press the VCR allows you to ON button on your remote control to switch easily locate the it on. Select the VCR channel on your TV beginning of any (e.g.
- Page 6 One Touch Recording (OTR) OTR information If you wish to record for a set length of time (e.g. 1 With the one touch recording feature you can make recordings quickly and hour) you can set an easily. Make sure your VCR is properly installed and all the channels are tuned REC/OTR recording to stop in the correct order.
- Page 7 Recording Using Video Plus+ system This feature is only available on certain models. In order for the VIDEO Plus+ system to work Station VCR Channel This recording system correctly the channels in your VCR must be BBC1 makes programming a stored in the order opposite.
-
Page 8: Timer Recordings
Timer Recordings Set a timer position Timer recordings allow you to Press the VIDEO PLUS+/PROGRAM program your VCR button twice on the remote control. The timer to switch on and Press the PLAY or event menu will appear. record a programme STOP buttons to select a free timer position at a preset time. - Page 9 Checking or Cancelling Video Plus+ Recordings & Timer Recordings This feature is only available on certain models. Cancel Timer Set You can easily check the details If your VCR is in timer record mode press of a VIDEO Plus+ the TIMER REC button to switch on your VCR.
-
Page 10: Counter Reset
Clock/Counter Display & Zero Return Selecting the counter Your VCR has a counter which can The clock displays the current time in the display the actual VCR display. The counter displays how amount of time (in much time has elapsed since the point at seconds) that a VCR which you started playing a tape. - Page 11 Using the Playback Sharpness Feature Play a tape Your VCR has a Playback Start playing a VCR tape. Sharpness feature Press MENU, the main menu will appear. Press PLAY or STOP to highlight which can be used PLAYBACK SHARPNESS. to improve the You will not be able to select the playback picture quality sharpness feature unless a VCR tape is playing.
- Page 12 Checking VIDEO Plus+ Set-Up This feature is only available on certain models. In order for the VIDEO Plus+ system to VCR Channel Station work correctly your TV Station must be Before VIDEO BBC1 in the positions in the table opposite. Plus+ recordings BBC2 will work properly...
- Page 13 Setting the Security Protection In an effort to fight Select Pin Code crime, we have equipped your VCR with security Press MENU; the main menu will appear. protection. When switched Press PLAY or STOP to highlight PIN ON you have to enter a PIN CODE REGISTRATION.
- Page 14 Help and Trouble Shooting Before requesting service please check the following points; Symptom Cause Solution No Power Is your VCR plugged in? Plug your VCR into a mains socket Is the mains power switch off? Switch on the mains power socket VCR will not switch ON even though Is your VCR in TIMER RECORD mode? Try pressing the TIMER REC button to bring...
- Page 15 Connecting your VCR to Another VCR If you connect your VCR to another VCR or Video camera it is possible to duplicate a pre- recorded tape. Please note that the picture quality will not be as good as that on the original tape.
- Page 16 Connecting your VCR to a Hi-Fi How to connect your VCR to a Hi-Fi You can connect your VCR directly to your Hi-Fi with an audio (phono) lead. All connections must be made with both your VCR and Hi-Fi unplugged from the mains supply. Connect one end into the SCART socket on the back of your VCR.
- Page 17 Wiring Instructions Warning: If the mains plug is cut from the mains lead of this appliance the plug must be destroyed. A mains plug with bared wires is hazardous if engaged in a mains output socket. The wires in your VCR mains lead are coloured in accordance with the following:- The wire which is coloured Blue must be connected to the terminal in the plug which is marked with the letter N or coloured Black.
-
Page 18: Specifications
Specifications Operating Temperature: ......5 o C to 40 o C Heads: ........Video: 2 Rotary Heads . - Page 20 4D76801A V 01.03...
Need help?
Do you have a question about the VX1200 and is the answer not in the manual?
Questions and answers