Hyndsight Vision Systems HVS-001C Operating Instructions

WARRANTY
This Limited Product Warranty shall apply to Hyndsight Vision Systems, Inc. products including all accessories as
contained within the original package. Hyndsight Vision Systems, Inc. warrants that products from its authorized
distributors and retailers will meet the applicable product specifications and be free from all defects in material and
workmanship during the Limited Product Warranty Period, one year starting from the date of original purchase, assuming
the products are used in accordance with the user manual and other documentation provided at the time of purchase.
This Limited Product Warranty is subject to the following terms and conditions:
1. To obtain warranty service, a proof of purchase in the form of an original or copy of the sales receipt from the original
retailer is required.
2. This Limited Product Warranty is only valid and enforceable in the country/region where the product is sold.
3. This Limited Product Warranty is at sole option of Hyndsight Vision Systems, Inc. to either repair or replace the
defective product during the Limited Product Warranty Period. Hyndsight Vision Systems, Inc. will not replace missing
components from any package purchased through online auctions.
4.To obtain warranty service, contact your local Hyndsight Vision Systems, Inc. authorized retailer or Hyndsight Vision
Systems, Inc. for shipping instructions and an RMA number.
5. This Limited Product Warranty covers expenses for inspecting and repairing the product during the Limited Product
Warranty Period. The defective product shall be delivered by the purchaser at his/her own expense to the designated
premises together with the proof of purchase and RMA number.
6. Hyndsight Vision Systems, Inc. will return the repaired or replaced product to the drop-zone for collection by the
customer in good working condition. All replaced faulty products or components will become property of Hyndsight Vision
Systems, Inc..
7. If Hyndsight Vision Systems, Inc. repairs or replaces the product, the repaired or replaced product shall continue to be
warrantied for the remaining time of the original warranty period or for three (3) months from date of repair or
replacement, whichever is longer.
8. Hyndsight Vision Systems, Inc. reserves the right to add, delete, or amend the terms and conditions at any time
without prior notice on its website, www.hyndsightvision.com.
9. A two (2) year warranty is extended to the Flush Mount, as well as to all purchases made in the United Kindgom.
10. This limited warranty shall not apply if the damage was caused by any of the following:
a. The product serial number has been removed, erased, defaces, altered, or is illegible.
b. The damage resulting from the use of the product in a manner other than its normal and
customary manner.
c. Deterioration of the product due to normal wear and tear.
d. The damage arising from improper installation, unauthorized repair, alteration, or
modification to this product by third parties other than Hyndsight Vision Systems, Inc. or its
e. The damage arising from operation with components or accessories not officially authorized
provided by Hyndsight Vision Systems, Inc. or used in ways other than its intended use.
f. The damage arising from exposure to abnormally corrosive conditions or operation with
heat/cold or humidity.
Manufactured in China for Hyndsight Vision Systems, Inc.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Hyndsight Vision Systems
This device complies with Industry Canada licence-exempt RSS-210 standard(s). Operation is subject to the following
59 Pine Street | Peterboroungh, NH 03458
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
1-844-SEE-SAFE (733-7233)
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
designee.
or
extreme
Hyndsight Vision Systems, Inc.
Instructions for Use
Operating instructions for the CRUZ and Journey
product lines by Hyndsight Vision Systems, Inc.
Applies to HVS-001C camera and HVS-001M monitor