Do you have a question about the A-3300SR and is the answer not in the manual?
Questions and answers
Stan
April 23, 2025
how to remove reels
1 comments:
Mr. Anderson
May 12, 2025
To remove the reels from the Teac A-3300SR:
1. Disconnect the 4 motor wires from the terminals and release the wire harness straps. 2. Loosen the 2 hex head set screws in the Brake Drum (A) and 2 in the Reel Turntable Assembly (F), then lift off these parts. 3. Remove the 4 screws securing the Brake Assembly (D) to the motor and carefully lift off the Brake Retainer (B). Do not disconnect wires from the brake solenoid (C) or micro switch. 4. Remove the 4 screws securing the Reel Motor (E) to the chassis through the front panel.
Need help?
Do you have a question about the A-3300SR and is the answer not in the manual?
Questions and answers
how to remove reels
To remove the reels from the Teac A-3300SR:
1. Disconnect the 4 motor wires from the terminals and release the wire harness straps.
2. Loosen the 2 hex head set screws in the Brake Drum (A) and 2 in the Reel Turntable Assembly (F), then lift off these parts.
3. Remove the 4 screws securing the Brake Assembly (D) to the motor and carefully lift off the Brake Retainer (B). Do not disconnect wires from the brake solenoid (C) or micro switch.
4. Remove the 4 screws securing the Reel Motor (E) to the chassis through the front panel.
This answer is automatically generated