Media Play; Playing A Commercially Recorded Disc; Playing Files On A Usb Device - Samsung BD-J5100 User Manual

✎
NOTES
No disc should be in the product
■
when you upgrade the software
using the USB Host jack.
When the software upgrade is
■
done, check the software details in
the software Upgrade menu.
Do not turn off the player during
■
the software upgrade. It may cause
the player to malfunction.
Software upgrades using the USB
■
Host jack must be performed with a
USB flash memory stick only.
Auto Upgrade Notification
If you have connected the player to
your network, and then set Auto
Upgrade Notification on, the player
automatically notifies you when a
new software version is available for
the player.
To set Auto Upgrade Notification on,
follow these steps:
Select
1. Auto Upgrade Notification,
and then press the v button.
Use the ▲▼ buttons to select
2.
and then press the v button.
If there is a new software version
available, the player notifies you with
a popup message.
To upgrade the firmware, remove
1.
any discs from the player.
Select yes in the Pop-up. The
2.
player turns off automatically, then
restarts, and begins the download.
(Never turn the player on or off
manually during an upgrade.)
16
The update progress popup
3.
appears.
When the update is complete, the
4.
player will restart automatically.
✎
NOTES
The upgrade is complete when the
■
player turns off, and then turns on
again by itself.
Never turn the player off or on
■
manually during the update process.
Samsung Electronics takes no legal
■
responsibility for player malfunction
caused by an unstable Internet
connection or consumer negligence
during software upgrade.
Contact Samsung
Provides contact information for
assistance with your player.
Terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and
services.
On,
Reset
Returns all settings to their factory
defaults except for the network
settings.

Media Play

Playing a Commercially
Recorded Disc
Press the 8 button to open the
1.
disc tray.
Place a disc gently into the disc
2.
tray with the disc's label facing up.
Press the 8 button to close
3.
the disc tray. Playback starts
automatically.

Playing Files on a USB Device

There are two methods you can
use to play or view multimedia files
located on a USB device.
method 1
Turn the player on.
1.
Connect the USB device to the
2.
USB port on the front panel
of the player. The New Device
Connected pop-up appears.
pLAy dISC pHOTOS VIdEOS mUSIC
New device connected.
123
photos
Videos
No Disc
music
> move " Enter ' Return
App 1 App 2 App 3 App 4 App 5 more Change device Settings
✎
NOTE
If the pop-up does not appear, go
■
to Method 2.
Use the ▲▼ buttons to select
3.
photos, Videos , or music, and then
press the v button. The Photos,
Videos & Music screen appears
listing the content of the device.
Depending on how the contents
are arranged, you will see either
folders, individual files, or both.
✎
NOTE
Even though the player will display
■
folders for all content types, it will
only display files of the Content
Type you selected in Step 3. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Photos, Videos &
Music screen and going to Step 3 in
Method 2 below.
If necessary, use the ▲▼◀▶
4.
buttons to select a folder, and
then press the v button.
Select a file to view or play, and
5.
then press the v button.
Press the RETURN button to exit a
6.
folder or the ExIT button to return
to the Home screen.
Go to pages 18~20 for
7.
instructions that explain how to
control playback of videos, music,
and pictures on a USB device.