A1webcams TritonHD MD1600H User Manual page 35

<TIP>
Display Letter input window to input characters.
According to menu, letter input window can be different, but Set is the same.
- Use direction key for letter input.
- Select letter using [▲/▼] button.
- Press [►] to input after select the input letter.
- Press [◄] to Shift back and delete.
- Avaiable letters
Digit
Capital letter
Small letter
Special letter
Status
Press "On/Off" using [◄] or [►] button after pressing [ENTER] button. To raise frame rate while
recording or network monitoring, turn off the unusing channels, Refer to Recording section.
Type
This is shown the video signal (NTSC/PAL) input only, and its setup is carried through Jumper in
MD1600H. When booting MD1600H, it will automatically recognize video signal from first recognized
video signal set by examing from ch 1 to 16. If there is no video input connection, it will follow Jumper
set.
Color
Set "Color / B/W" using [◄] or [►] button after pressing [ENTER] button.
AGC (Auto Gain Control)
Set "Enable/Disable" using [◄] or [►] buttong after pressing [ENTER].
: 1 2 3 4 5 6 7 8 9 0
: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
: a b c d e f g h i j k l m n o p q r s t u v w x y z
: ( ) - . $ # @
35