Summary of Contents for Energy TDT HD 3
- Page 1 MULTIMEDIA HD DVB-T ENERGY TDT HD 3 Manual de usuario / User manual / Manuel de l’utilisateur...
- Page 2 User manual...
-
Page 4: Important Safety Instructions
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. WARNING: To reduce the risk of fire or electric shock, do not expose your TDT HD 3 to rain or moisture. saFety Considerations. -
Page 5: Battery Disposal
ALWAYS turn off your TDT HD 3 before cleaning it. Do not use liquid or aerosol cleaners. Clean your TDT HD 3 with a soft, damp (not wet) cloth. TDT HD 3 handling and care Place the product in a well-ventilated area Don’t install it in the cold or under direct sunlight... -
Page 6: General View
3. geNeRaL VIeW 3.1. Front panel STANDBY INDICATOR: Used to visually show power state of the set top box, the green LED will be light if turned on the set top box and the red LED will be light if the set top box entered standby mode. REMOTE CONTROL SENSOR: Used to receive the signal from the remote control. -
Page 7: Remote Control
4. ReMOTe CONTROL bUtton desCriptions MUTE: Mute or restore audio output. INFO: Displays additional channel information. TTX: Displays Teletext information. STANDBY MUTE LIST SUBTITLE: Selects subtitles language. EXIT: Exits the current menu or returns to the previous menu. INFO OK: Confirms an entry or selection. Displays the list of channels. -
Page 8: Installing The Batteries
installing tHe batteries Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment. The following diagram shows the correct way to insert batteries. 1. Open the cover 2. Install batteries 3. Close the cover ≥... - Page 9 Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver. 5.1. ConneCting tdt Hd 3 to a tV ANT IN...
-
Page 10: First Time Installation
After all connections have been made properly, you are ready to use your TDT HD 3 . Switch on TV and make sure the receiver is connected to the Main Power. Press STANDBY button to switch the receiver on. -
Page 11: Basic Operation
7. BasIC OPeRaTION 7.1. prograM settings To access the Menu, press the MENU button and select [Program]. The Menu provides options to adjust the Program Settings. Select an option and press OK or RIGHT to adjust that setting. Press the EXIT button to exit the Menu. -
Page 12: View Favourite Program
View FaVoUrite prograM Press the Favourite button and the Favourite Menu will appear. Press UP/DOWN to select your Favourite Programs. Press OK to select your favourite program. delete a tV or radio prograM Select the Program and then press the BLUE button. A message will appear. Press OK to delete the program. -
Page 13: Video Settings
7.1.2. epg (eleCtroniC prograM gUide) The EPG is an on-screen TV guide that shows schedu- led programs seven days in advance. Press the EPG button on the Remote Control to access the guide. You can use the UP/DOWN key to select the preferred program. -
Page 14: Channel Search
7.2.1. aspeCt ratio You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9 Full Screen or Auto to get the maximum display when watching TV. ≥ 4:3 LB (LetterBox): Typically for wide screen content on convencional 4:3 TV with black bars above and below the picture. -
Page 15: Antenna Power
7.3.1. aUto searCH: Search and install all channels automatically. This option overwrites all preset channels. Select [Auto Search] and press OK or RIGHT to start channel search. To cancel channel search, press EXIT. 7.3.2. ManUal searCH: Install new channels manually. This option adds new channels without changing the current channels list. Select [Manual Search] then press OK or RIGHT. -
Page 16: Country Region
7.4.1. tiMe oFFset Select auto or manual for GMT offset adjustments. 7.4.2. CoUntry region Select the Country Region when [Time Offset] is set to Auto. 7.4.3. tiMe zone Select the Time Zone Offset when [Time Offset] is set to Manual. 7.4.4. -
Page 17: System Setting
7.6. systeM setting To access the Menu, press MENU and select [System]. The menu provides options to adjust the system settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the Menu. 7.6.1. -
Page 18: Slide Time
7.7. Usb To access the Menu, press the MENU button and select [USB] using the RIGHT/LEFT keys. The menu provides options to playback Music, Photo, Video and Multimedia files. The unit will only support USB devices with FAT32 file system. It will not support NTFS file system. 7.7.1. - Page 19 sUbtitle bg ≥ [White]: Displays the subtitle in white background. ≥ [Transparent]: Displays the subtitle in transparent background. ≥ [Grey]: Displays the subtitle in grey background. ≥ [Yellowgreen]: Displays the subtitle in yellowgreen background. sUbtitle Font Color ≥ Red]: Displays Subtitle in red font. ≥...
-
Page 20: Scheduled Recording
segment you want to watch or review, while the recording process continues its normal course. Press “exit” to hide the timeshift bar. Press “INFO” key to show detailed information, and to show again the timeshift bar. Press “STOP” key to finish the recording process. 8.2. -
Page 21: Troubleshooting
9. TROUBLesHOOTINg If you experience problems with this DVB-T receiver or its installation, in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section. Problem Possible cause What to do Power is not connected Connect the power adapter Switch on the power by pres- No picture... -
Page 22: Technical Specification
TS. Limited to MPEG-2 DVB-T broadcasting channels. format 11. FIRMWaRe UPDaTe to update the firmware of your tdt Hd 3 , visit ourdownload section in our website: www.energysistem.com you will find all the files and instructions needed to update successfully your device. -
Page 23: Warranty Procedure
12. WaRRaNTy energy sistem soyntec s.a. warrants its products to be free from defects in materials and workmanship at the time of purchase. the special 36-months warranty is valid for the european Union. For other countries, please refer to your specific legislation or your local distributor. -
Page 24: Declaration Of Conformity
14. DeCLaRaTION OF CONFORMITy Manufacturer Name: Energy Sistem Soyntec S. A. Address: Pol. Ind. Finestrat C/ Calpe esq. C/ Alicante S/N, 03509 Finestrat Alicante Tel: 902 388 388 Fax: 902 119 034 NIF: A53107488 We declare under our own exclusive responsibility that the product: ®...
Need help?
Do you have a question about the TDT HD 3 and is the answer not in the manual?
Questions and answers