Download Print this page

Eagle power SD17 Operations & Parts Manual

Low speed floor machine

Download this manual

SD17 and SD20

LOW SPEED

FLOOR MACHINE

OPERATION & PARTS MANUAL

April 2003

REV A

Table of Contents

Page 1 SD17 and SD20 LOW SPEED FLOOR MACHINE OPERATION & PARTS MANUAL April 2003 REV A...
Page 2: Specifications
SPECIFICATIONS OPERATING INSTRUCTIONS Length: 24.25 inches Check machine for damage to cord or Width: 20 inches plug. Height: 48 inches Use suitable pads or brushes. Weight: 85.5 pounds Speed: 175 Std. To install or change the pad: Pad Diameter: 17 inches or 20 inches 1.
Page 3: Parts List
PARTS LIST ILLUSTRATION Fig. Part # Description 1 N310122 Switch box, handle 1 N310121 Cover, switch box 1 N210102 Switch 1 N310124 Handle tube 7/8 x 16” 1 N310118 Grips 1 N310120 Trigger, switch 1 N310119 Safety lock 1 N110149 Spring 1 N110163 Clip, spring 1 N210121 Cord, 50’...
Page 4 PARTS LIST ILLUSTRATION Fig. Part # Description 4 N310129 Handle cam lock N110111 Bolt, adj. 5/16-18 cam 4 N110112 Washer, oval 4 N110148 Nut, 5/16-18 Nylok 4 N310128 Cord hook N310130 Bracket, handle N110114 Pin 1/4 x 3/4 N110164 Washer, spring 1/4” N110151 Cap, push 1/4”...
Page 5: Warranty Policy
Warranty Policy Limited Warranty Eagle Power Products (EPP) warrants new cleaning equipment against defects in material and workmanship under normal use and service to the original purchaser as detailed below. 10 Years Subject to the conditions stated below, EPP warrants polyethylene tanks and housings to be free from defects in materials and workmanship for a period of ten years.

Sd20