1. Manuals
  2. Brands
  3. Eagle power Manuals
  4. Floor Machine
  5. HSB21
  6. Operation and parts manual

Eagle power HSB21 Operation And Parts Manual

Battery burnisher
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
HSB21
Battery Burnisher
OPERATION AND PARTS MANUAL
Rev A
01/2003

Advertisement

Table of Contents
loading

Related Manuals for Eagle power HSB21

Summary of Contents for Eagle power HSB21

  • Page 1 HSB21 Battery Burnisher OPERATION AND PARTS MANUAL Rev A 01/2003...
  • Page 3 HS2100 PARTS LIST Item No. Part No. Description Lower Body Housing Battery Condition Meter RPM Meter 60A Circuit Breaker 36VDC Indicator Light-Red 36VDC Indicator Light- Green Toggle Switch Upper Hood Cover Battery Frame Assembly 12V Battery Battery Cable Battery Strap Electrical Plug DC Contactor Shunt...
  • Page 4 HS2100 PARTS LIST Item No. Part No. Description 5/16-18x 1 1/2 Hex Head Bolt 5/16-18x 1/2 Slotted Flat Head Undercut Machine Screw 5/16-18x 1 Slotted Truss Head Machine Screw #6-32x 1 Slotted Pan Head Machine Screw #8-32x 1/2 Slotted Pan Head Machine Screw #10-32x 1 Slotted Pan Head Machine Screw 1/4-20x 3/4 Slotted Pan Head Machine Screw #8-32x 1 Slotted Round Head Machine Screw...

  • Page 5: Pad Changing Instructions

    INSTRUCTIONS Operating instructions: 1. Make sure burnish pad is on and attached properly. See “Pad changing instructions”. 2. Adjust pressure on burnish pad by turning “Caster knob” clockwise to reduce pressure on burnish pad. 3. Move “Toggle switch” to “On” position; green light will be on. 4.

  • Page 6: Charging Batteries

    INSTRUCTIONS (cont.) Charging batteries: 1. See instructions on charger before operating. 2. Move “Toggle switch” to “Off” position; green light will be off. 3. Lift and remove “Upper hood cover”. 4. Place charger plug into mating plug on machine located on the left side behind batteries.

  • Page 7: Troubleshooting

    INSTRUCTIONS (cont.) Trouble shooting: 1. Green light will not come on. a. Check batteries. b. Check battery connections. c. Check circuit breaker. d. Check wire connections to light. e. Check light. 2. Motor will not run. a. Check batteries. b. Check battery connections. c.

  • Page 9: Warranty Policy

    Warranty Policy Limited Warranty Eagle Power Products (EPP) warrants new cleaning equipment against defects in material and workmanship under normal use and service to the original purchaser as detailed below. 10 Years Subject to the conditions stated below, EPP warrants polyethylene tanks and housings to be free from defects in materials and workmanship for a period of ten years.

Table of Contents