Using The Optical Zoom; Using Digital Zoom; Turning On The Date Stamp Feature - Kodak EASYSHARE M5350 Extended User Manual

Using the optical zoom

You can use the zoom while taking a video or before taking a picture.

Using digital zoom

Use digital zoom to get up to 5X magnification beyond optical zoom. (Digital zoom is
not available in Smart Capture mode.) Press Telephoto (T) until the slider on the LCD
is at the end of the optical zoom range. Release Telephoto (T), then press it again.
NOTE: You may notice decreased image quality when using digital zoom.

Turning on the date stamp feature

You can add a stamp—showing the date taken—to pictures you take next.
IMPORTANT: You cannot add a date stamp to pictures already taken. Once a date stamp
is applied, it cannot be removed on the camera.
1 Press the Display button
2 Press to choose More Tools
3 Press to choose Date Stamp (Off)
4 Press to choose Date Stamp (On)
The date is stamped on pictures you take next. The feature stays on until you turn it off.
To return to picture-taking mode, press the Shutter button halfway down.
www.kodak.com/go/support
1 Use the LCD to frame your subject.
Zoom
2 To zoom in, press Telephoto (T).
To zoom out, press Wide Angle (W).
3 Take the picture or video.
NOTE: For focus distances, see Specifications starting on
until tools appear at the top of the LCD.
, then press OK or .
, then press OK.
, then press OK.
Taking pictures/videos
page 49.
13