Cutting Edge DVRA8 Instruction Manual

1.

Diagram

1. Reset button 2. Take photos or video 3 Turn on/ Off 4. Camera 5. Microphone 6. US connector
card slot 8. Indicator
1.

Turning the DVR ON/ OFF


Press and hold Button 3 for about 2 seconds. The DVR will vibrate for about 5 seconds and the indicator light
will be solid red. The DVR is now in standby mode.

When the DVR is on press and hold Button 3 for about 2 seconds. The DVR will vibrate 2 times and the red
indicator light will turn off.
2.

Taking Photos

 Turn the DVR on
 When in stand-by mode press and release button 2. The DVR will vibrate and the red indicator will turn off and
back on indicating that a photograph has been taken.
3.

Taking videos

 Turn the DVR on
 When in stand-by mode press and hold button 2 for about 2 seconds. DVR will vibrate 2 times and the indicator
light will flash 2 times. You are now recording video.
4.

Motion Detection

 Turn the DVR on
 When in stand-by mode press and release Button 3. The indicator light will flash six times and the DVR will
vibrate 6times and the indicator light will turn off.
5.

Saving video files

 Press and release button 3. The indicator will flash 3 times and the unit will vibrate 3 times as the file is save.
6.

Udisk

 Turn the DVR off, insert into empty USB port on your computer. The indicator light will turn on and the unit
will vibrate about 5 seconds you can now find the DVR in the My Computer folder. Your computer will
automatically assign the drive a letter (Normally E: )
7. Time Setting: The DVR can display the recording time on the video/ photo file in the format of year.month.day and
hour:min:second.
 Create a notepad file with the name "time.txt" and enter the current date and time in the format: yyyy.mm.dd
hh:mm:ss.
(4GB)
USB-DVR
Model # DVRA8
Instruction Manual
7. TF