Table of Contents
Advertisement
System description
The Pro-B MainsDock is a power supply unit.
The Pro-B MainsDock unit is used to power battery flash generators from AC mains power
instead of the battery. Since the operation of the generator is not limited by the battery
capacity, long time usage and continuous
Pro-B MainsDock.
The Pro-B MainsDock is compatible with the following Profoto generators:
• Pro-7b
6
• Pro-B2 EOP
– update needed
2
• Pro-B3 serial no above 1104180060
aTTenTion!
Pro-B3 (below serial number 1104180060) and the discontinued
Pro-B2 generators need the EOP
Please get in contact with your local distributor or service station for further information.
We do not recommend using the Pro-B Mainsdock with generators that are not updated because some components
may overheat!
1
Not applicable to Pro-7b
2
EOP stands for "Extended Overheat Protection".
www.profoto.com
modeling light are made possible with the
1
– update to work properly with the Pro-B Mainsdock.
2
Advertisement
Table of Contents
