Summary of Contents for Initsys Vid1VideoServer
- Page 1 Installation Manual Version 1.5 October 2007 www.initsys.co.uk How much clearer does it need to be?
-
Page 2: Safety Instructions
Detailed Safety Instructions Read these instructions carefully. Keep these instructions. The Initsys Vid1videoserver is a low voltage “blackbox” that converts a standard 1vpp CCTV video output to a format that Heed all warnings. is compatible with the VerifiedAlarms network. It also has a digital input and output that enable the device to signal alarms and switch. - Page 3 (if you are interested in a franchise please contact us at sales@Initsys.co.uk). These servers are manufactured by Initsys and they, in turn, control a bank of Mass Video Storage Devices(MVSD). Each server can control up to a Petabyte of MVSD.
-
Page 4: Table Of Contents
Vid1VideoServer. Foreword. Contents 1. Description................4 2. Hardware Overview..............5 3.Initial Programming..............6 3.1. Image................6 3.2. Audio................7 3.3. System................7 3.4. Network................8 3.5. Event.................8 5.Example Schematic..............10 6.Relay Control................10 7. Specifications................10 ear Customer, 7.1. Pin Connections..............10 7.2. Led Indications..............10 For some time the ability to correctly verify that an alarm 7.3. -
Page 5: Description
Digital Video Recorder, Network Video Recorder and Network Cameras. Units that are not directly supported can be interfaced using the Vid1videoserver “blackbox”. The following document explains how to connect to the VerifiedAlarms network and ultimately to an off-site event monitoring by a control room. -
Page 6: Initial Programming
Blocker does not stop the device from downloading the control. Open the device by typing the URL in the Browser. You must use Internet Explorer with the Vid1VideoServer. You will need to enter the Username and Password, defaults are:- Live User - user / user00 Admin User - admin / admin00 16. -
Page 7: Image
The unit can work simultaneously in MPEG4 and option on the front page and speaking into a MJPEG mode and has two compression options for connected microphone on the connected computer. each mode. The device is compatible with both Initsys VerifiedAlarms, iRecord and Merlin products. -
Page 8: System
Vid1VideoServer. This is not normally enabled as most internal networks use DHCP and IP addresses of the 3.3. System connected devices are hidden to the ARC by the VerifiedAlarms Network. Change the time and date Zone of the system. The time date is used for reference time interval only for the transmitted video images. -
Page 9: Network
Network 3.5. Event Tick the event enable option. The Vid1Videoserver supports wired connection only, Vid1VideoserverW is available to special order that supports WiFi. Change the static IP address as required. At least one DNS should be entered, if you do not know the Choose the Primary Motion JPEG option. - Page 10 Vid1VideoServer. For example – we have fps at 4 and pre and post images set to 8 – we will transmit 2 second before Tick the FTP option. the event and 2 seconds after the event with a total of 16 images.
-
Page 11: Example Schematic
Vid1VideoServer. 4. Example Schematic... -
Page 12: Relay Control
Vid1VideoServer. 5. Relay Control Specifications 6.1. Pin Connections 6.2. Led Indications 16. January 2008... -
Page 13: Power & Dimensions
Vid1VideoServer. 6.3. Power & Dimensions 6.5. ARP/Ping IP Address Set up 12Vdc 1.25A Acquire an IP address on the same network segment your computer is connected to. Size – 36(H) x 86 (W) x 116mm(D) Locate the MAC address on the server label. -
Page 14: Telemetry Formats
End User Licence Agreement that governs warranty, limitation of liability, fair use policy and your obligations. A copy of this document is available to print from the website or is available on request from the Initsys main office detailed below. 16. January 2008... -
Page 15: Contact Information
Vid1VideoServer. Illustration 1 Alarm received in Merlin2DotZero. Contact information. This document – Vid1VideoServer www.Initsys.co.uk +44 1530 262100 ❐ +44 1530 260782 Unit 6, Marquis Court, Marquis Road, Rawdon, Moira, DE12 6EJ...
Need help?
Do you have a question about the Vid1VideoServer and is the answer not in the manual?
Questions and answers