Steps:
(1) Connect the Repeater to the Computer by using a network cable (network cable comes with the
Repeater). Connect the AC Power Supply and turn ON the Repeater.
(2) Define an IP Address for your Computer (Eg. 192.168.0.88).
NOTE: The Repeater uses the default IP Address of 192.168.0.254.
For Windows XP:
[Internet Protocol (TCP/IP)]
For Windows 8:
Center] [Change adaptor settings] [Ethernet] [Internet Protocol Version 4 (TCP/IP)]
[Properties]
Updated On 3 Apr 2013. Version 1.1
Go to [Control Panel] [Network Connection] [Local Area Connection]
[Properties]
Go to [Control Panel] [Network and Internet] [Network and Sharing
2