Magnum PF21GB300 Service Manual page 18

− Typical programming time 6ms(< 1 0ms) for up to 16 bytes
High reliability
− Endurance 106 cycles 1)
− Data retention 40 years 1)
− ESD protection 4000 V on all pins
8 pin DIP/DSO packages
Available for extended temperature ranges
−
−
4.4.2 Pin Description
SERIAL CLOCK (SCL): The SCL input is used to positive edge clock data into each EEPROM device and
negative edge clock data out of each device.
SERIAL DATA (SDA): The SDA pin is bi-directional for serial data transfer. This pin is open-drain driven
and may be wire-ORed with any number of other open-drain or open-collector devices.
The AT24C08 only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed
on a single bus system. The A0 and A1 pins are no connects.
4.4.3 Memory Organization
T24C16, 16K SERIAL EEPROM: Internally organized with 64 pages of 16 bytes each, the 16K requires a
10-bit data word address for random word addressing.
4.4.4 Block Diagram
Industrial: - 4 0 t o +85
Automotive: - 4 0 t o +125
18