Advertisement
TROUBLE SHOOTING
IF YOUR KEYBOARD OR REMOTE CONTROL CAN NOT WORK AFTER INSTALLATION. PLEASE CHECK FOLLOWINGS:
- MAKE SURE YOU HAVE CONNECTED THE RECEIVER CORRECTLY TO THE COMPUTER; THE RECEIVER HAS BEEN
PROPERLY PLUGGED ONTO COMPUTER'S USB PORT.
- MAKE SURE YOU HAVE INSERTED AA BATTERIES EACH INTO KEYBOARD AND REMOTE, AND THEY ARE
COMPARTMENT CORRECTLY. (4 PCS FOR KEYBOARD, 2 PCS FOR REMOTE)
- IF WITHOUT ANY INTERFERENCE, SUCH AS OTHER COMPUTER PERIPHERALS, THE WORKING DISTANCE
(THE DISTANCE BETWEEN KEYBOARD AND THE RECEIVER) IS ABOUT 10 METERS.
- IF USING MORE THAN TWO UNITS AND INTERFERE OCCURRED. PLEASE RESET ID AGAIN.
NOTICE
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO POERATE THE EQUIPMENT.
HEREBY WENTRONIC ELECTRONIC COMPONENTS HANDELS GMBH DECLARES THAT ITEM 70228 IS IN LINE WITH THE ESSENTIAL REQUIREMENTS
AND RELEVANT PROVISIONS OF DIRECTIVE 1999/5/EC.
THE FULL CE / R&TTE DECLARATION IS DEPOSITED WITH THE MANUFACTURER AND CAN BE REQUESTED AT THE ADDRESS.
CABSTONE
WWW.CABSTONE.COM
FOR TECHNICAL SUPPORT PLEASE CONTACT: SUPPORT@CABSTONE.COM
WENTRONIC ELECTRONIC COMPONENTS HANDELS GMBH
PILLMANNSTR. 12
D-38112 BRAUNSCHWEIG
Advertisement
