Asus DSL-N10S User Manual page 30

Configure the Filter settings
The Filter page allows you to restrict certain types of outgoing or incoming data
packets from or to the network clients based on their MAC addresses.
To configure the Filter settings:
1. Click Access Management > Filter tab.
2. Select the Filter Type Selection.
3. In the Direction field, select Outgoing, Incoming, or Both.
4. In the Source IP address field, key in the IP address of the network client
whose incoming packets you want to restrict.
5. In the Destination IP address field, key in the IP address of the network
client whose outgoing packets you want to restrict.
6. Click Save to add the IP filter settings to the IP/MAC Filter Listing.
30 DSL-N10S Chapter 4: Configuring via the web GUI