AutoXray EZ-SCAN 6000 User Manual
  1. Manuals
  2. Brands
  3. AutoXray Manuals
  4. Scanner
  5. EZ-SCAN 6000
  6. User manual

AutoXray EZ-SCAN 6000 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

U
M
SERS
ANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EZ-SCAN 6000 and is the answer not in the manual?

Questions and answers

Michael H Young
January 29, 2025

Can I update the hardware? That's on my device, the auto x ray six thousand

0
1 comments:
Mr. Anderson
February 10, 2025

No, the provided information only mentions updating the software of the AutoXray EZ-SCAN 6000 using the EZ-PC tool. There is no mention of updating the hardware.

This answer is automatically generated

0
José Juan samperio mendoza
March 28, 2025

Hola me super urge un cable co estorbo obd2 para scaner ez 600 autoxray soy de México

0

Summary of Contents for AutoXray EZ-SCAN 6000

  • Page 1 SERS ANUAL...

  • Page 2: Safety Precautions And Warnings

    Service Service must only be performed by AutoXray repair personnel. Service or repair by unqualified personnel may result in risk of injury, damage to the unit, and may void your warranty. Refer to the Product Warranty Policy section of this manual.

  • Page 3: Table Of Contents

    ABLE OF ONTENTS Safety Precautions and Warnings ..........2 Table of Contents ................3 Introduction ..................5 Setup / Operating Instructions .............8 SCAN - OBD-II, GM OBD-I, Chrysler OBD-I SCAN ...................13 DATA - OBD-II, GM OBD-I, Chrysler OBD-I View the Data................16 Real Time Data Monitoring ............18 View Freeze Frame Data .............19 View Trouble Codes..............20 Clear the Codes ................22...
  • Page 4 Registration Card Please complete the enclosed Registration Card and return it, or call 480.804.1673. It is the only way AutoXray can notify you of future updates / upgrades for your scanner. Thank You for buying the EZ-SCAN Scanner from AutoXray, the leading provider in cost effective automotive diagnostic scanners.

  • Page 5: Introduction

    Arrow Keys Figure 1. EZ-SCAN Scanner • AutoXray designed this elegant EZ-SCAN tool with capabilities that are the best value on the market today. The compact design has received proprietary patents and makes these scanners so simple and easy to use.
  • Page 6 • Live Data Stream Monitoring • 29 Frame Capture Mode • Reset Check Engine Lights AutoXray has made sure your new scanner is computer safe. It WILL NOT accidentally deploy airbags, change transmission gears, affect ABS brake performance, or fire injectors and ignition systems.
  • Page 7 NTRODUCTION • Performs Key-On Engine Off (KOEO) • Key-On Engine Running (KOER) tests • Continuous monitor (wiggle) test GM OBD-I - (for 1982-1995 GM 12 pin ALDL vehicles) Text Styles Used In This Manual POWER text in this font is used to designate a button/key on the front of the scanner Config Unit text in this font is used to designate text that is...

  • Page 8: Setup / Operating Instructions

    ETUP PERATING NSTRUCTIONS This section gives the information you need to set up and operate your EZ-SCAN Scanner: • Install New Batteries • Configure the Scanner for Your Vehicle • Set the Display Units (SAE/Metric) • Connect the Scanner to Your Vehicle Install New Batteries The EZ-SCAN Scanner is powered by 4 AA batteries.
  • Page 9 ETUP PERATING NSTRUCTIONS • As long as good batteries are in the scanner, the vehicle engine configuration and data will remain in the scanner’s memory, even after the unit is powered off. • Operational data, Trouble Codes, and all remaining scanned information will remain in memory until the unit is reconfigured.
  • Page 10 ETUP PERATING NSTRUCTIONS Set the Display Units (SAE/Metric) The EZ-SCAN scanner can be set up to display in SAE or Metric units. The default setting is SAE. Go to Section 4 if you do not need to change the display units. 1.
  • Page 11 ETUP PERATING NSTRUCTIONS (Fine adjustment) 5. Use the arrow keys for course adjustment. 6. The MON key will turn the backlight off. The default position is ON and can be left that way, however it will lessen the life of your batteries.
  • Page 12 ETUP PERATING NSTRUCTIONS OBD-II Generic Connector (Yellow) This standardized cable is used to scan 1996 and newer Domestic, Asian, and European vehicles. GM Connector Works with OBD-I 1982-1995 vehicles with a 12 pin ALDL. Ford Connector Works with OBD-I 1983-1995 Ford vehicles with EEC-IV computers.

  • Page 13: Scan

    NOTE: For additional connection location information, including the “OBD Connector Locations Database,” please look at the Customer Support page on the AutoXray web site (www.autoxray.com). 2. Make sure that all the pins are straight and that the connecting surfaces are free of oils, grease, and moisture.
  • Page 14 Before scanning a vehicle, the EZ-SCAN scanner must be correctly configured for your vehicle. Refer to “Setup / Operating Instructions” on page 8 if you need to configure AutoXray 6000 the scanner. OBD-II Generic Scanning the Vehicle 1. Press POWER to display the EZ-SCAN scanner opening screen.
  • Page 15 SCAN - OBD-II, GM OBD-I, C OBD-I (C HRYSLER Scan mode and display the opening screen.) SAE VPW Protocol • [OBD-II] Before an Selected OBD-II vehicle is scanned, the vehicle computer and the EZ- SCAN scanner will initialize, do a protocol check, then do !Scanning! Readiness Tests to...

  • Page 16: View The Data

    The EZ-SCAN scanner DOES NOT need to be connected to the vehicle to view the scanned data. The vehicle engine config- uration and data will remain in AutoXray 6000 the scanner’s memory until a OBD-II Generic vehicle is scanned again. This...
  • Page 17 IEW THE OBD-II, GM OBD-I, C OBD-I (C HRYSLER Viewing the Data 1. If the EZ-SCAN scanner is not 1-Operational Data ON, press POWER to display 2-Freeze Frame Data 3-Trouble Codes the opening screen. 4-Clear Codes 2. Press DATA to display the 5-Customize Data 6-EZ-PC Data menu.

  • Page 18: Real Time Data Monitoring

    ROUBLE ODES OBD-II, GM OBD-I, C OBD-I HRYSLER Operational Data Items To see a description of each of the Operational Data Items for your vehicle, refer to the appropriate section on the following pages: • “OBD-II Generic Operational Data Items” on page 57 •...

  • Page 19: View Freeze Frame Data

    ONITORING OBD-II, GM OBD-I, C OBD-I HRYSLER Monitor mode, the number 6. Use the t and uarrow keys to in the lower right corner Fuel System 1 will stop flashing. Open Loop time), and the p and qarrow Fuel System 2 Not Supported step through the sensors (1 at a Load Value...

  • Page 20: View Trouble Codes

    REEZE RAME OBD-II, GM OBD-I, C OBD-I HRYSLER Viewing OBD-II Freeze Frame Data 1. If the EZ-SCAN scanner is not ON, press POWER to display the opening screen. 2. Press DATA to display the Data menu. Press the arrow keys 2-Freeze Frame Data is highlighted, then press ENTER.
  • Page 21 ROUBLE ODES OBD-II, GM OBD-I, C OBD-I HRYSLER [OBD-II] Use the arrow keys until Trouble Codes is high- lighted, then press ENTER. 1-Operational Data 3. [OBD-II] OBD-II vehicles read 2-Freeze Frame Data both Pending Codes (codes 3-Trouble Codes 4-Clear Codes that have only been detected 5-Customize Data once by the vehicle computer)

  • Page 22: Clear The Codes

    OFF, and the vehi- cle ignition key is ON, then press POWER. 2. Press DATA to display the Data menu. [GM, Chrysler] Use the AutoXray 6000 3-Clear arrow keys until OBD-II Generic Codes is highlighted, then press ENTER.

  • Page 23: Reset Emr Lamp-Chrysler (1989-95)

    LEAR THE ODES OBD-II, GM OBD-I, C OBD-I HRYSLER ENTER to Clear will be dis- played on the screen. Press ENTER 1-Operational Data to clear all the codes in the vehi- 2-Freeze Frame Data cle’s computer. (Pressing DATA 3-Trouble Codes 4-Clear Codes again will take the unit out of Data 5-Customize Data...
  • Page 24 ESET HRYSLER ENTER to Clear will be displayed on the screen. Press ENTER to reset the AutoXray 6000 EMR lamp. (Pressing DATA CHRY ‘95 VIN=C again will take the unit out of Data mode and display the opening screen.) 4. After the EMR lamp has been...

  • Page 25: Customizing Data Items

    Service Mode, a mode which fixes the timing and the idle speed. If the idle speed on your fuel injected vehicle is affected during scanning, AutoXray recommends that you do not drive your vehicle while it is scanned. •...
  • Page 26 Press the Scan key to Scan New Data play Refer to “Scanning the Vehicle” on page 13. CAUTION: AutoXray recommends that the person operating the vehicle does not use/view the scanner. Always use an assistant to operate the scanner while driving the vehicle. Capturing the Problem 1.
  • Page 27 - OBD-II, GM, C APTURE HRYSLER ed, the scanner will begin displaying ‘>’ symbols. Each symbol represents Capture Mode two frames of data. The default set- >>>>>>>T>>>>>>> ting for each frame is one second. Refer to “Set the Time Units for Capture Mode”...
  • Page 28 - OBD-II, GM, C APTURE HRYSLER menu. [OBD-II] Make sure 1-Capture Mode highlighted, then press 1-Start Capture ENTER. 2-View Data [All] Use the arrow keys 2-View Data until highlighted, then press ENTER. 3. Data from each sensor will be displayed on the Fuel System 1 screen.

  • Page 29: Oxygen Sensor Tests - Obd-Ii

    - OBD-II XYGEN ENSOR ESTS Before You Start • [OBD-II] Oxygen Sensor Tests are OBD-II specific tests of each of the oxygen sensors on a vehicle. Although there are up to eight possible sensors the scanner can test, cer- tain vehicles may not support all eight tests, and most vehi- cles use only two or four.

  • Page 30: Readiness Tests - Obd-Ii

    XYGEN ENSOR ESTS CONT 2. Press MON to display Monitor menu. Use the arrow keys until 2-Oxygen Tests is highlighted, then press ENTER. 4. Use the t and u arrow keys to select which Oxygen Sensor 3. Use the arrow keys to select an O2 Sensor number, then press ENTER.
  • Page 31 [OBD-II] Your scanner must be connected, and the key in the ON position, before viewing OBD-II Readiness Test data. If MON is pressed, and the vehi- AutoXray 6000 cle has not been scanned, the OBD-II Generic Press scanner will display...
  • Page 32 - OBD-II ESULTS lowed by its status. • Each reading will give the Test Number, the Component Number, Pass or Fail status, Test ID $01 Pass whether it is a "Hi" value or Component ID $11 Pass Low "Low" value test, the value 0400 >=0200 reported by the on-board...

  • Page 33: Scan The Koeo Codes - Ford

    (hard faults) and intermittent faults stored as Memory Codes. 1. Run the engine until it is at normal operating temperature. 2. Make sure ALL electrical loads AutoXray 6000 (air conditioning, radio, blower FORD ‘90 VIN=N fan, etc.) are OFF. 3. Connect the EZ-SCAN scanner...
  • Page 34 KOEO codes and memory codes are retrieved from the vehicle com- puter. A normal scan can take up to three minutes. AutoXray 6000 • Vehicles equipped with FORD ‘90 VIN=N 4.9 liter engines with a manual transmission- Push the clutch in during the entire test.

  • Page 35: Scan The Koer Codes - Ford

    If one of these trouble codes are stored, repeat the scan with the nec- essary steps to eliminate the AutoXray 6000 problem. For example, the FORD ‘90 VIN=N RPM too low dur- error...
  • Page 36 KOER C CAN THE ODES 3. Connect the EZ-SCAN scan- ner cable to the scanner and to the vehicle EEC-IV comput- er connector, then press POWER to display the EZ- Enter to Scan Scan to Exit SCAN scanner opening screen. 4.
  • Page 37 Drive and then back into Park, when prompted. Dynamic Response 8. If is dis- played, briefly accelerate the engine AutoXray 6000 FORD ‘90 VIN=N to wide open throttle, and release. (Snap throttle) 9. After the scanner has completed Scan...

  • Page 38: Scan The Dcl Data - Ford

    SCAN DCL D Before You Start • Before scanning a vehicle, the EZ-SCAN scanner AutoXray 6000 must be correctly config- FORD ‘90 VIN=N ured for your vehicle. Refer to “Setup / Operating Instructions” on page 8 if you need to con- figure the scanner.

  • Page 39: View The Koeo Codes - Ford

    SCAN DCL D Scan will be displayed on the screen. Press ENTER to start scanning the vehicle ! Scan ! computer/sensors. (Pressing *Successful* SCAN again will abort Scan mode and display the opening screen.) Initializing will be dis- played when entering the DCL scan.

  • Page 40: View The Memory (Trouble) Codes - Ford

    KOEO C IEW THE ODES 1. Press POWER to display the EZ- SCAN scanner opening screen. 1-KOEO Codes 2. Press DATA to display the Data 2-Memory Codes 1-KOEO Codes menu. Make sure 3-KOER Codes 4-Clear Codes is highlighted, then press ENTER. 5-DCL Data 6-EZ-PC 3.
  • Page 41 IEW THE EMORY ROUBLE ODES the vehicles computer during normal operation, and are stored in memory. 1-KOEO Codes 1. Press POWER to display the EZ- 2-Memory Codes 3-KOER Codes SCAN scanner opening screen. 4-Clear Codes 2. Press DATA to display the Data 5-DCL Data 6-EZ-PC menu.

  • Page 42: View The Koer Codes - Ford

    KOER C IEW THE ODES Before You Start • Your vehicle must be scanned before viewing the KOER data. If DATA is pressed, and the vehicle has not been scanned, the scan- 1-KOEO Codes 2-Memory Codes Scan ner will display Press the 3-KOER Codes key to Scan New Data 4-Clear Codes...

  • Page 43: View The Dcl Data - Ford

    DCL D IEW THE Before You Start • Your vehicle must be 1-KOEO Codes scanned before viewing the 2-Memory Codes data. If DATA is pressed, and 3-KOER Codes 4-Clear Codes the vehicle has not been 5-DCL Data scanned, the scanner will dis- 6-EZ-PC Press the Scan play...
  • Page 44 DCL D IEW THE played on the scanner screen. A ref- erence number is displayed in the lower right corner of the screen. (The Engine Speed 643 RPM total number of sensors and sensor The t and u arrow keys will Spark Advance types will vary with each type of 10.0 o...

  • Page 45: Clear Trouble Codes - Ford

    DCL D IEW THE NOTE: If the communication link with the vehicle is broken during 6. Use the t and u arrow keys to step through the sensors (1 at a Monitor mode, the number in the lower right corner will time), and the p and q arrow keys to page through the sensors stop flashing.

  • Page 46: Activate The Wiggle Test - Ford

    CTIVATE THE IGGLE Before You Start • The wiggle test, or con- tinuous monitor test, AutoXray 6000 allows you to test sen- FORD ‘90 VIN=N sor systems for intermit- tent faults. Activating the wiggle test, then tap- ping, wiggling, or mov-...
  • Page 47 6. Press MON to exit the Wiggle Test and display the opening screen. AutoXray 6000 NOTE: FORD ‘90 VIN=N If a fault was detected, run a KOEO test, then check the Memory Codes to see the error.

  • Page 48: Dcl Data Capture - Ford

    CAUTION: AutoXray recommends that the person operating the vehicle does not use/view the scanner. Always use an assistant to operate the scanner while driving the vehicle.
  • Page 49 DCL D APTURE frame is one second. Refer to “Set the Time Units for Capture Mode” on page 78 to change the setting. 5. When the scanner is put in [Capture Mode] Capture Mode it is ready to cap- >>>>> ture real-time data (for those problems that only seem to occur while driving).
  • Page 50 DCL D APTURE 2. Press MON to display Monitor menu. Use the arrow keys until 2-DCL Capture is highlighted, then press ENTER. 1-Wiggle Test 2-View 3. Use the arrow keys until 2-DCL Capture Data is highlighted, then press ENTER. 4. Data from each sensor will be dis- played on the screen.

  • Page 51: Troubleshooting

    Scanner Screen Menu Trees What to do When the Scanner Displays a Fault/Trouble Code NOTE: AutoXray recommends obtaining a service manual or repair manual to assist in automotive diagnostics. Manuals are available at your local parts store, book store, or library.

  • Page 52: Screen Contrast Problems

    "Vehicle Is Not Responding" Message (continued) Check the following “Manufacturer Specific” items: • [Ford] Make sure to connect both the multi-wire and the single-wire connectors to the AutoXray cable. • [Ford] At the beginning of a KOEO test, listen for solenoids clicking under the hood.

  • Page 53: Screen Contrast Problems

    ROUBLESHOOTING NOTE: These steps will re-set the scanner. If your problem persists please contact AutoXray technical support. Scanner Screen Menu Trees POWER >AutoXray EZ-SCAN opening screen CONFIG >1-Config Unit Year Ford Year Chrysler Year OBD-II Generic GEO OBD-II Honda OBD-II...
  • Page 54 ROUBLESHOOTING Connect to EZ-PC software Enter to begin >5-System Info Software Version: V X.XX K X.XX Serial Number: 9999999 ID#1=XXXXXXXX ID#2=XXXXXXXX Systems Avaliable SCAN - OBD-II, GM, Chrysler >ENTER to Scan, SCAN to Exit SCAN - Ford >1-KOEO/KOER Scan >2-DCL Data Scan MON - OBD-II >1-Capture Mode 1-Start Capture...
  • Page 55 ROUBLESHOOTING >1-Operation Data >2-Freeze Frame Data >3-Trouble Codes 1-Trouble Codes 2-Pending Codes >4-Clear Data >5-Customize Data >6-EZ-PC DATA-GM OBD-I >1-Op Data >2-Trouble Codes >3-Clear Codes >4-EZ-PC DATA - Ford OBD-I >1-KOEO Codes >2-Memory Codes >3-KOER Codes >4-Clear Codes >5-DCL Data >6-EZ-PC DATA - Chrysler OBD-I >1-Op Data...

  • Page 56: Operational Data Items

    PERATIONAL TEMS • See “OBD-II Generic Operational Data Items” on page 57. • See “Enhanced OBD-II Operational Data Items” on page 59. • See “OBD-II Oxygen Sensor Test Readings” on page 61. • See “GM Operational Data Items” on page 63. •...

  • Page 57: Obd-Ii Generic Operational Data Items

    OBD-II ENERIC PERATIONAL TEMS Mass Air Flow (Grams/Sec) Range: 0 to 105 gr/sec High Perf. Vehicles: 0 to 255 gr/sec Mass air flow sensor input is used by the ECM to calculate fuel delivery. As the air flow increases, the fuel delivery must also increase. Displayed in grams per second.
  • Page 58 OBD-II ENERIC PERATIONAL TEMS Intake Air Temperature Range: -40 C to 215 C Temperature of the air drawn through a cleaner and distributed to each cylinder for use in combustion. Intake Manifold Pressure Range: 10 to 105 kPa, or 0 to 5 Volts The manifold absolute pressure displayed in kilopascals or volts.

  • Page 59: Enhanced Obd-Ii Operational Data Items

    Enhanced OBD-II upgrades, your scanner will need to be oper- ating software version 1.42 or higher. You can always update your software version using PC-Link (part # 41000), then call AutoXray Customer Service to activate the Enhanced OBD-II upgrades.
  • Page 60 Parameters Values Parameters Values Catalyst Freq Bank2 High Adapt Knock Retard Degrees Catalytic Convtr Temp C or F High Speed Fan On / Off Coast Clutch Solenoid On / Off IAC Duty Cycle Percentage Cool. Gauge Cmd Numeric IAC Position Steps Coolant Sensor Volts...

  • Page 61: Obd-Ii Oxygen Sensor Test Readings

    Parameters Values Parameters Values O2 Cross Counts Bank2 Count Shift Delay O2 Sensor1 Bank1 Shift Solenoid A On / Off O2 Sensor1 Bank1 Heater On / Off Shift Solenoid B On / Off O2 Sensor1 Bank2 Shift Solenoid C On / Off O2 Sensor1 Bank2 Heater On / Off Short Term Trim Bank1 Percentage O2 Sensor2 Bank1...
  • Page 62 OBD-II O XYGEN ENSOR EADINGS transition times. The computer will measure the amount of time between when the O2 sensor is at the low voltage and when the O2 sensor is at the high voltage to obtain the lean to rich transition time. The computer will measure between the high and low voltages to obtain rich to lean transition time.

  • Page 63: Gm Operational Data Items

    GM O PERATIONAL TEMS A/C - Air Conditioner ECM - Electronic Control Module EGR - Exhaust Gas Re-circulation Valve MAP - Manifold Absolute Pressure TPS - Throttle Position Sensor A/C (Enabled / Disabled) If the ECM is commanding the A/C Clutch to engage, this parameter should indicate ENABLED, otherwise this parameter should indicate DISABLED.
  • Page 64 GM O PERATIONAL TEMS carburetors. A reading of ON indicates that air has been diverted. Air Fuel Mixture Range: 0 to 25.5 The air to fuel mixture, as calculated by the ECM. The ideal mixture is 14.7 to 1. Air Switch (On / Off) An indication of where air from the air pump has been directed in engines with an air management system.
  • Page 65 GM O PERATIONAL TEMS Integrator. Boost Duty Cycle (Duty Cycle %) Range: 0 to 100% This parameter represents the duty cycle of the wastegate towards boost pressure. A boost duty cycle of 100% means that the wastegate is completely closed and all exhaust is routed through the turbocharger, at the same time the wastegate duty cycle should be 0%.
  • Page 66 GM O PERATIONAL TEMS that use the ECM as part of the cruise control system. Cruise Set Speed (MPH) Range: 0 to 255 MPH This parameter represents the speed target for the speed control system. This is the speed the ECM is attempting to maintain. Desired A/F Mix (Ratio) Range: 0 to 25.5 This parameter represents the ideal air/fuel ratio calculated by the ECM...
  • Page 67 GM O PERATIONAL TEMS Engine Coolant Light (On / Off) When the ECM detects a low coolant level it will indicate an ON condition. Normal operating mode is OFF. Engine Hot Light (On / Off) A detection of an engine hot condition will show ON. Normal operating mode is OFF Engine Load Range: 0 to 255...
  • Page 68 GM O PERATIONAL TEMS Electronic Spark Timing is ENABLED under certain driving conditions. EVO (On /Off) On Saturns with power-assisted steering, power steering pressure can be modulated with the electronic variable orifice (EVO). This valve changes pressure based on vehicle speed. At slower speeds, the orifice is commanded ON increasing the power steering pressure, at higher speeds steering correction is small, therefore less pressure is needed, the orifice should be commanded OFF.
  • Page 69 GM O PERATIONAL TEMS fuel and the parameter should indicate OFF. Fuel Cutoff DR (On / Off) If the ECM has detected that either the engine speed is too high or vehicle speed exceeds original tire speed rating, this parameter should read ON indicating that the ECM has cut off fuel to bring operating conditions down to a more reasonable level.
  • Page 70 GM O PERATIONAL TEMS calibrated position if it has lost its reference count. Idle Speed Flag (Forward / Reverse) This will indicate the stepper motor direction for idle control. A FORWARD reading should indicate a lower idle and less airflow, a REVERSE reading should represent a higher idle and more airflow.
  • Page 71 GM O PERATIONAL TEMS Learn Control (Enabled / Disabled) Learn Control should be ENABLED when the Block Learn function is active based on the ECM. When the ECM has determined that learn control should be disabled as with an integrator at the calibration limit, the screen should indicate DISABLED.
  • Page 72 GM O PERATIONAL TEMS An indication by the ECM of a logged fault (malfunction) code. Mass Air Flow (Grams/Sec) Range: 0 to 105 gr/sec High Perf. Vehicles: 0 to 255 gr/sec Mass air flow sensor input is used by the ECM to calculate fuel delivery. As the air flow increases, the fuel delivery must also increase.
  • Page 73 GM O PERATIONAL TEMS compensate for a high pressure condition by de-energizing the A/C clutch or increasing idle speed. Power Str PSI High (Yes / No) An indication to the ECM to increase the engine idle speed due to additional load placed on the engine by the power steering pump. PROM ID The PROM is the identification number of the part of the ECM containing the factory running parameters.
  • Page 74 GM O PERATIONAL TEMS if the light is not being commanded ON the screen will display OFF. Spark Advance (°) Range: -90° to +90° The amount of spark advance or timing from the ignition module. Displayed in crankshaft degrees. Start Up Coolant Temp (°F) Range: -40°...
  • Page 75 GM O PERATIONAL TEMS lowest with the throttle closed and highest at wide open throttle. Transmission Tmp (°F) Range: -40° to 304° Some vehicles are equipped with sensors that monitor the transmission temperature. The ECM will monitor the temperature for overheating. Turbo Boost (kPa) Range: 0 to 200 kPa Actual boost pressure added to barometric pressure to maintain a desired...

  • Page 76: Ford Dcl Operational Data Items

    DCL O PERATIONAL TEMS Brake (BOO) (On/Off) Vehicles with an automatic transmission have a brake switch input state. When the brake is depressed, ON should be displayed, otherwise the display will indicate OFF. The brake switch does not apply for manual transmissions. EGR Feedback (Volts) Range: 0 to 5 Volts For vehicles that have a EGR valve position sensor, this will show voltage...
  • Page 77 DCL O PERATIONAL TEMS Intake Air Temp (Volts) Range: 0 to 5 Volts Displays the voltage of the temperature sensor which measures the temperature of the air flowing into the manifold. Loop Status (Open/Closed) If the loop status is OPEN, this means that the air/fuel mixture is being controlled by ECM tables or sensors other than the oxygen sensor.
  • Page 78 DCL O PERATIONAL TEMS This reading indicates the total charging system voltage. With the motor OFF, this value will indicate the voltage of the battery. With the engine running, this value will indicate the alternator voltage. Vehicle Speed Sensor (MPH) Vehicle speed determined from the speed sensor signal input.

  • Page 79: Chrysler Operational Data Items

    HRYSLER PERATIONAL TEMS A/C Pressure (psi) This parameter shows the A/C refrigerant pressure. A/C Press Sens (Volts) The actual A/C pressure is converted from the A/C pressure input sensor voltage. A.I.S. Position (Steps) This indicates the number of steps the PCM has commanded to the idle stepper motor.
  • Page 80 HRYSLER PERATIONAL TEMS pressure. Applies to turbocharged vehicles only. C1 - C4 Knock Retard (°) Range: 0° to 128° Using a detonation sensor mounted in the intake manifold, the PCM can detect knock and compensate for it. Knock retard represents the computer commanded retard for cylinder #1, #2, #3, and #4.
  • Page 81 HRYSLER PERATIONAL TEMS • ENABLED: SC is enabled but not engaged. • NORMAL: SC is engaged and Cruise mode is active. • ACCEL: SC is engaged and Acceleration mode is active. • DECEL: SC is engaged and Deceleration mode is active Coolant Temp (°...
  • Page 82 HRYSLER PERATIONAL TEMS lower voltage represents a deceleration or cruise condition. The in-Hg value is determined by converting the MAP sensor input voltage to a pressure. The lower the MAP the higher the manifold vacuum. Min Throttle Pos (Volts) Range: 0 to 5 Volts This voltage is the idle TPS voltage which is used as a reference by the PCM.
  • Page 83 HRYSLER PERATIONAL TEMS Total amount of spark retard commanded by the PCM in response to a monitored knock. Tbody Temp Sens (Volts) Range: 0 to 5 Volts The PCM converts the voltage read from the throttle body temperature sensor to a temperature (see Throttle Body degrees F). Throttle Body (°...
  • Page 84 HRYSLER PERATIONAL TEMS Vacuum (in-Hg) Range: 0 to 60 in-Hg The PCM calculated vacuum reading as converted from barometric pressure and manifold absolute pressure. Vehicle Speed (MPH) The PCM reads input from the speed sensor to determine if the vehicle is changing speed or idling with the throttle closed.

  • Page 85: Upgrade, Update, Specifications

    AutoXray. One of our Customer Service Representatives will step you through the process (see our web site or contact AutoXray for current prices). Do the following to UPGRADE your scanner: 1. Press CONFIG from the initial screen.

  • Page 86: Registration Card

    Registration Card Please complete the enclosed Registration Card and return it, or call 480.804.1673. It is the only way AutoXray can notify you of future upgrades / updates for your scanner. Scanner Update - Loading New Software Version Updating your scanner involves loading the latest version of the AutoXray software onto your scanner.

  • Page 87: Set The Time Units For Capture Mode

    PGRADE PDATE PECIFICATIONS play the initial screen. 1. Press CONFIG from the initial screen. 5-System Info 2. Use the arrow keys to display on the screen, then press ENTER. 3. Software Version information will be displayed on the screen. Press ENTER to view the next screen. Serial Number 4.
  • Page 88 PGRADE PDATE PECIFICATIONS total of 29 snapshots (Frames) of data in an entire capture. Depending on what capture “time” you choose, between 500ms (1/2 sec.) to 5000ms (5 secs.), will be the wait time (interval) between each one of the snapshots (Frames). For example, if you choose 1000ms (1 sec), intervals a frame would update data for a total of 29 frames of data, or 1 frame per second (29 sec.

  • Page 89: Technical Description Of Obd-I And -Ii

    OBD-I, OBD-II ECHNICAL ESCRIPTION OF OBD-I Original equipment automobile manufacturers (OEM) developed On-Board Diagnostics (OBD) in response to increased diagnostic requirements from the California Air Resource Board (CARB). The regulations that were developed by CARB and accepted by the Environmental Protection Agency (EPA) were designated OBD-I. Beginning in 1982 and by 1989 all new cars and light duty trucks sold in California had to have OBD-I.
  • Page 90 OBD-I, OBD-II ECHNICAL ESCRIPTION OF The Federal Clean Air Act Amendments of 1990 requires that all vehicles sold in the United States meet OBD-II requirements by the 1996 model year. The first OBD-II systems appeared on selected vehicle types in 1994. Some important OBD-II requirements are: Vehicle service information available to all technicians;...
  • Page 91 2008 model year. The CAN standard is also a mandatory part of each new state emissions inspection and maintenance program and will be retrofitted into the established programs. AutoXray's newest tool is CAN-ready and all AutoXray EZ-Link tools are software upgradeable to support CAN. Page 91...

  • Page 92: Product Warranty Policy

    11. If a returned Product is found to be defective and such defect is covered by this warranty, AutoXray shall at its option and at no charge to the customer, repair or replace the Product. Following such repair or replacement, AutoXray shall return the Product at AutoXray's expense.

  • Page 93: Additional Products /Accessories

    RODUCTS CCESSORIES CANNERS EZ-SCAN 6000 Includes: EZ-SCAN 6000 Scanner, GM OBD-I Cable, Ford OBD-I Cable, Chrysler OBD-I Cable, OBD-II Cable, OBD-II MFG Specific Cable, EZ-PC 500 EZ-SCAN 5000 Includes: EZ-SCAN 5000 Scanner, GM OBD-I Cable, Ford OBD-I Cable, Chrysler OBD-I Cable, OBD-II Cable, OBD-II MFG Specific Cable, EZ-Update, and PC Interface.
  • Page 94 EZ-Link Trade in - trade in your old unit for a new EZ-SCAN scanner Internet Access Visit our Internet web site at www.autoxray.com for the latest products, accessories, upgrades, and available updates. Contact us by email at support@autoxray.com Page 94...

  • Page 95: Index

    OTES Page 95...
  • Page 96 OTES Page 96...
  • Page 97 OTES Page 97...

This manual is also suitable for:

Ex-scan 5000Ez-scan 4000Ez-scan 3000Ez-read 2000Ez-read 1000

Table of Contents

Save PDF