Backup/Restore - CastleNet Freeway DSL Series User Manual

4.8.2 Backup/Restore

This page allows you to backup current settings to a file, or restores the settings from a file
which was saved previously. Besides, you could reset the current configuration to factory
default. This is the same function as you press the Reset button on the rear panel for more
than 8 seconds.
To save settings to a file, just click the Save button to save the file to a local drive.
To load settings from a file, please follow the following instructions:
1. Click the Browse button to select the saved file.
2. Confirm your selection.
3. Click the Upload button to start restoring.
To reset all the current settings, just click Reset button to reset all settings to default value.
This is the same as you push the Reset button on the rear panel of Freeway DSL.
IMPORTANT! Do NOT power off the Freeway DSL or press the Reset button while this
procedure is in progress.
39
Freeway DSL User's Manual