Do you have a question about the TR-7950 and is the answer not in the manual?
Questions and answers
Darmawan Adi Cahyono
February 15, 2025
Cara setting freq repeater pada TR 7950
1 comments:
Mr. Anderson
May 14, 2025
To set the repeater frequency on the Kenwood TR-7950:
1. Use the panel keyboard to select the desired frequency. 2. The microprocessor is pre-programmed for a simplex or ±600 kHz offset according to the ARRL 2-meter band plan. 3. If you need to manually change the offset, press the "OS" key.
This allows you to set the correct transmit and receive frequencies for repeater operation.
Need help?
Do you have a question about the TR-7950 and is the answer not in the manual?
Questions and answers
Cara setting freq repeater pada TR 7950
To set the repeater frequency on the Kenwood TR-7950:
1. Use the panel keyboard to select the desired frequency.
2. The microprocessor is pre-programmed for a simplex or ±600 kHz offset according to the ARRL 2-meter band plan.
3. If you need to manually change the offset, press the "OS" key.
This allows you to set the correct transmit and receive frequencies for repeater operation.
This answer is automatically generated