Advertisement
Do you have a question about the qx-3701 and is the answer not in the manual?
Open/Close Button for CD in RV is not working. Is there a way to eject CD manually without taking In-wall unit out?
To manually eject a CD from a Quest Engineering QX-3701 in-wall unit without removing the entire unit, follow these steps:1. Power Off the Unit: Turn off the power to ensure safety.2. Locate the Manual Eject Hole: Look for a small pinhole on or near the CD slot. This is the manual eject access.3. Use a Paperclip or Similar Tool: Straighten a paperclip and gently insert it into the pinhole.4. Apply Gentle Pressure: Push the paperclip in slowly until you feel resistance, then apply a bit more pressure. The CD tray should pop out slightly.5. Remove the CD: Gently pull the CD out by hand.If the unit does not have a manual eject hole or the CD still won’t eject, the unit may need servicing.
This answer is automatically generated
Need help?
Do you have a question about the qx-3701 and is the answer not in the manual?
Questions and answers
Open/Close Button for CD in RV is not working. Is there a way to eject CD manually without taking In-wall unit out?
To manually eject a CD from a Quest Engineering QX-3701 in-wall unit without removing the entire unit, follow these steps:
1. Power Off the Unit: Turn off the power to ensure safety.
2. Locate the Manual Eject Hole: Look for a small pinhole on or near the CD slot. This is the manual eject access.
3. Use a Paperclip or Similar Tool: Straighten a paperclip and gently insert it into the pinhole.
4. Apply Gentle Pressure: Push the paperclip in slowly until you feel resistance, then apply a bit more pressure. The CD tray should pop out slightly.
5. Remove the CD: Gently pull the CD out by hand.
If the unit does not have a manual eject hole or the CD still won’t eject, the unit may need servicing.
This answer is automatically generated