Howto Changecolorpanels - GE GSD750 Use And Care Manual

HOWTO CHANGECOLORPANELS
If you are redecorating, you can change your dishwasher's front panel to
match or blend with your new colors by flipping it over. Each side of each
panel is a different color. You may also paint a panel with a color of your
own choice.
How to Changethe Door Panel
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful-edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
NOTE: Do not operate
dishwasherwhile changing
panelsor when lower access
panel is removed.
How to Changethe Lower Panel
1.
Remove the bottom panel attachment screws.
2. On models without top mounting screws, remove
:' 'g@~inin g 'hescrews
the entire access assembly by rotating the bottom
out and lifting it up and over the retaining tabs.
3. On models with top mounting screws, remove
\
4. Take out the top trim screws and remove the
top trim.
5. Slide the color panel(s) up and out and put the
color you want in front.
6. Replace the top trim and screws.
7. Replace the entire access assembly by reversing
—
the steps.
BottomPanelAttachment S crews
Wood Panel TrimKik
Wood panel trim kits containtrimandinstructions
for addinga decorativewood door panel and lower
access panel no thicker than 1/4"to match kitchen
cabinets.
Specify the trim number when ordering:
GPF40BC (ChromeTrim& Screws)
GPF40BK (Black Trim)
GPF40WD (White Trim)
GPF40AD (Almond Trim)
OrderingInformation
Wood panel trim kits are availablefor $10.00 each
which includes shipping and handling. Make check
payable to General Electric Co.
Order from:
Dri-View Manufacturing
4706 Allmond Ave.
Louisville,KY 40209
12