Device Information - D-Link DIR- User Manual

Section 3 - Configuration
This page displays the current information for the DIR-600. It will display the LAN, WAN (Internet), and Wireless
information.
If your Internet connection is set up for a Dynamic IP address then a
Release button and a Renew button will be displayed. Use Release
to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button
and a Disconnect button will be displayed. Use Disconnect to drop
the PPPoE connection and use Connect to establish the PPPoE
connection.
See the following for more information.
General: Displays the router's time and firmware version.
Internet: Displays the MAC address and the public IP settings
for the router.
LAN: Displays the MAC address and the private (local) IP
settings for the router.
Wireless LAN: Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
D-Link DIR-600 User Manual

Device Information

41