Table of Contents
Advertisement
19 Maintenance, care
Always disconnect the machine from the mains supply before cleaning it, using only a soft dry cloth.
If the case gets very dirty the cloth can be slightly moistened. Remove all traces of moisture with a
dry cloth before re-using the charger.
Do not immerse the ALC 8500-2 Expert in water!
Do not use solvent-based cleaning agents to clean the charger.
If a fault occurs with the charger, do not open the case, as it contains no parts which you can repair
or replace yourself. Send the complete unit to our Service Department for repair.
Do not leave batteries connected to the charger for a long period when it is switched off, as they could
suffer damage through being discharged. If a battery leaks, do not touch it with your bare hands; use
rubber gloves or similar. Never allow the chemicals to contact your bare skin!
If the chemicals accidentally get on your skin, wash the affected area immediately with plenty of
running water. The same applies if the chemicals get on your clothing.
57
Advertisement
Table of Contents
