Table of Contents
Advertisement
ensure compliance with FCC RF exposure guidelines. While there may be differences
between the SAR levels of various phones and at various positions. In all cases, products
are designed to be within the guidelines.
FCC has granted an Equipment Authorization for this model phone with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. Additional
information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA) web site: http://www.phonefacts.net or
the Canadian Wireless Telecommunications Association (CWTA) web site:
http://www.cwta.ca.
In the United States and Canada, the SAR limit for mobile phones used by the public is
1.6watts/kg (w/kg) average over one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to account for any variations
in measurements.
1.4 System Requirements
The USB Modem supports any PC or MAC system using the USB 2.0 interface and
operating systems listed below:
Operating System:Windows 2000 / XP / Vista / 7, and MAC OS X 10.4 and above
Recommended Configuration:
CPU
1GHz Pentium or above
Hard Disk
20MB or above available
RAM
512M or above
The performance of the modem may be reduced if the configuration is below the
recommended requirement.
1.5 Technical Specifications
Networks
Frequency
Bands
Dimensions
Weight
Data Rate
Working
Voltage
Current
Consumption
HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE
HSPA+/HSUPA/HSDPA/UMTS 850/1900/2100 MHz
GSM/GPRS/EDGE 850/900/1800/1900 MHz
77mm x 28mm x 12mm
Approx. 30g
HSPA+ Mode up to 21Mbps
HSUPA Mode up to 5.76Mbps
HSDPA Mode up to 7.2Mbps
UMTS Mode up to 384 Kbps
EDGE Mode up to 236.8Kbps
GPRS Mode up to 57.6Kbps
5V
Resting 100mA rms
Max: 450mA rms
Advertisement
Table of Contents
