How To Set Up - Virgin Media Super Hub Installing

HoW to Set up

ConnECtInG YoUr CompUtEr
to YoUr SUpEr HUb
Setting up your
wireless connection
First plug in and switch on the Virgin
Media Super Hub. The power button is
located underneath. The large button
on the front of the unit should flash
and then become a blue colour.
Now switch on your computer.
If the large button fails to light up,
please check that the power cable is
securely connected to the back of your
Super Hub and the power is switched
on at the wall.
113775_VM_Super Hub_MainGuide_AW02.indd 5
How you connect wirelessly depends
on your computer's operating system.
Check that the Super Hub's wireless
light is on. If it isn't, press the large
button on the front of your Super Hub
for 5-10 seconds, release and re-check.
If you are using the Super Hub USB
Adapter, please skip to page 6.
If you are using a Mac, a different
USB adapter, or an internal wireless
Power button
card please follow the instructions that
relate to your operating system:
Windows XP
Windows Vista/Windows 7 page 10
Mac OSX
Your Wireless USB Adapter / internal Wireless
Card will need to be connected and enabled
for you to proceed.
Wireless light
page 8
page 12
5
29/10/2010 10:50