Summary of Contents for miGuard PMR1
-
Page 1: Remote Control
Wirefree PIR, Magnetic Sensor & Remote Control Accessory Pack PMR1 INSTRUCTIONS miGuard Customer Helpline 0345 257 1000 “ whatever your question, we’re just a phone call away “ lines open 0900 to 1700 Monday to Friday... - Page 2 (see (immediate battery change recommended). diagrams overleaf). A PIR responds more effectively If the PIR is connected to a miGuard GSM Alarm System, an SMS alert will automatically be sent to the to movement across the device than to movement registered user.
- Page 3 PIR Installation continued… Specification 4. Fit the Sensor in a position that will cover your Power Supply DC 3V (AA 1.5V LR6 Battery x 2) desired protection area: Static Current ≤ 90uA a. Fix the bracket to the wall with the fixings kit supplied.
- Page 4 PCB Layout 3. REMOTE CONTROL Features The Remote Control enables you to quickly and conveniently Arm and Disarm your Alarm System. In the event of an emergency when in or near your property, pressing the SOS button will trigger an Tamper alarm condition on the Control Panel/Siren.
- Page 5 REMOTE CONTROL BUTTONS/FUNCTIONS Press to Arm the Control Panel/Siren and all of the Accessories (Full Arm) Disarm Press to Disarm the System Part Arm Press to Part Arm the System (for Control Unit Systems only) (Home Arm) Press to activate a Panic Alarm (SOS). The Control Panel will auto-dial out to Panic the pre-set phone numbers immediately Mute Arm...
- Page 6 SUGGESTED LAYOUT: miGuard is a trademark of Response Electronics Limited © copyright 2014 All rights reserved PMR1_V3_1424...
Need help?
Do you have a question about the PMR1 and is the answer not in the manual?
Questions and answers