1. Manuals
  2. Brands
  3. Autocruise Manuals
  4. Motorhomes
  5. 2012 Van Conversion Range
  6. Owner's handbook manual

Autocruise 2012 Van Conversion Range Owner's Handbook Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

2012 owners handbook
van Conversion range

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2012 Van Conversion Range and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Autocruise 2012 Van Conversion Range

Summary of Contents for Autocruise 2012 Van Conversion Range

  • Page 1 2012 owners handbook van Conversion range...
  • Page 2 All Swift Group models have been certified by the National Caravan Council for compliance with stringent European Standards, British Legislation and industry set Codes of Practice specifically relating to health and safety issues. The approval process covers the testing and inspection of critical areas of the product from fire safety, weights and dimensions, to gas, electrics and ventilation.
  • Page 3 in t rodu ct ion Dear owner Important - please quote the base vin (vehicle identification number) in all Thank you for deciding to buy one of our correspondence with your dealer or new motorhomes. We are sure you will enjoy Swift Group Limited (Swift), this can be many happy hours in it and we hope the found on the lower corner of the front...

  • Page 5: Table Of Contents

    con t e nt s Warranty Information ......................5 The Motorhome Code ......................13 Preparing for the Road ......................17 ‘En Route’ ..........................23 Safety & Security ........................25 Arrival at Site ........................33 Connecting Services ......................35 Electrical Systems ........................53 Equipment Details .........................

  • Page 7: Warranty Information

    warr a nt y in for mat ion Warranty ........................... 6 What to do if you Require Assistance ..................8 Annual Service/Inspection Record ..................... 10 Annual Service/Inspection Record stamps ................. 11...

  • Page 8: Warranty

    war r anty PAnEL VAn ConVERSIon Panel Van Conversion Body Shell Warranty (“Body Shell Warranty”) – provided by MoToRHoME WARRAnTy Swift All the illustrations and descriptive matter in Swift will repair (or at its option, replace) any this handbook are intended to give a general defects with the panel van conversion to idea of the motorhome.
  • Page 9 3. All new motorhomes must be registered 8. In the first 12 months the SuperSure with Swift within 6 weeks of purchase as Warranty will cover any defect other than new. those specified in the Exclusions below. 4. The benefit of the SuperSure and Body 9.

  • Page 10: What To Do If You Require Assistance

    as s is tan ce ASSISTAnCE • R outine maintenance items which are part of the annual service including What to do if you Require Assistance lubricants, rubber gas hose, the cleaning of the heater and fridge flues, the Congratulations on purchasing a Swift Group replacement of gas jets, the resealing product.

  • Page 11: Supplier Contacts

    SUPPLIER CONTACTS A number of Swift Group suppliers manage their own Technical and Warranty related queries. Where a customer has a question relating to a product manufactured by a company listed below, we would advise that the first contact should be directly with them. Sargent Electrical Services Unit 39, Tokenspire Business Park, Beverley, East Yorkshire, HU17 0TB...
  • Page 12 s er v ic e in sp ectio n AnnUAL SERVICE / 1. Damp and lamination test. InSPECTIon RECoRD 2. Chassis and chassis to body security. In order to comply with the warranty, you must 3. Motorhome step. have your motorhome inspected and serviced 4.

  • Page 13: Annual Service/Inspection Record

    AnnUAL SERVICE/InSPECTIon RECoRD MOTORHOME MODEL ........REGISTRATION NUMBER ........ CHASSIS NUMBER .......... REGISTRATION DATE ........1st SERVICE 2nd SERVICE DATE: DATE: DEALER’S STAMP DEALER’S STAMP We certify that an annual service has been We certify that an annual service has been carried out in accordance with the handbook. carried out in accordance with the handbook.
  • Page 14 s er v ic e i nspec tion 7th SERVICE 8th SERVICE DATE: DATE: DEALER’S STAMP DEALER’S STAMP We certify that an annual service has been We certify that an annual service has been carried out in accordance with the handbook. carried out in accordance with the handbook.

  • Page 15: The Motorhome Code

    t h e m ot or h ome code Code of Conduct ........................14 The Country Code ........................15 The Coastal Code ........................16...

  • Page 16: Code Of Conduct

    c od e o f con du ct CAMP SITES Musical instruments, record players, radios and televisions should not be used to the Arrivals inconvenience of other people on the site. Report to reception immediately on arrival. Open and close doors quietly. Power Vehicle Movement generators must be adequately silenced and Keep to roadways unless otherwise directed.

  • Page 17: The Country Code

    c ode of c on du ct & th e cou nt ry code Departure WHEn TRAVELLInG, REFUELLInG oR on A Leave the pitch clean and tidy. FERRy EnSURE THE GAS SySTEM IS FULLy ISoLATED AT SoURCE. On leaving, check out with reception paying the required fees.

  • Page 18: The Coastal Code

    t he co astal code As our coastlines are increasingly used for recreation and education, the following suggestions are made to enable us to enjoy our inheritance and preserve it for posterity. DO NOT trample about, or move rocks unnecessarily. DO NOT frighten seals or seabirds. DO NOT spill detergents, solvents or fuel from boats as these can kill marine life. Live molluscs and crustaceans need not be collected as souvenirs - dead shells can usually be found.
  • Page 19 P rePa r ing for t h e roa d Before Moving Off ........................18 Motorhome Terms ........................18 Loading of Vehicle ........................19 Large Storage Areas ......................... 19 Tyres ............................20 Dedicated Travelling Passenger Seats ..................20 Three Point Seat Belts ....................... 21 Driving Licence ..........................

  • Page 20: Before Moving Off

    befo r e m ovi n g of f & m oto rh ome t e r ms BEFoRE MoVInG oFF CHECk: Maximum User Payload: The maximum allowable weight to be put • G as cylinders and all gas operated into the motorhome whilst it is being driven. appliances have been isolated, including This is made up of 4 sections: Personal effects, fridge, water heater, oven and space heater.

  • Page 21: Loading Of Vehicle

    lo ad in g of vehi cl e & l a r ge s t or a ge a re a s Warning: Turn off all gas appliances while (ii) The trailer is intended to be towed slightly the vehicle is in motion. If a heating nose heavy.

  • Page 22: Tyres

    t yr es & pass en g er s eatin g TyRES Designated passenger seats within the habitational If a wheel or tyre fitted to a wheel is compartment of your changed any replacement must be of the motorhome are identified same type of construction and size.

  • Page 23: Three Point Seat Belts

    t hr ee p oin t seat b elt s & driv in g l ic en ce motorhome. Read and follow the child seat • B elts that have been cut, frayed, damaged manufacturer's instructions for fitting the seat. or stressed through impact should be replaced.

  • Page 24: Vehicle Classifications

    v eh ic le classi f i cati on s & a dv ice on t ow in g VEHICLE CLASSIFICATIonS with the manufacturer’s recommendations, also check the rear and front axle loads on Motorhomes up to 3500kg MTPLM are P/LGV the motorhome.

  • Page 25: En Route

    e n r ou t e Panel van spare wheel detail ....................24 Cruise Control ......................... 24...
  • Page 26 en R o u t e PAnEL VAn SPARE WHEEL DETAIL Please refer to the Fiat / Peugeot handbook. CRUISE ConTRoL The driver of the vehicle should always remain seated and in control of the vehicle when the cruise control has been engaged. Never leave the driving seat for any reason when the vehicle is underway.
  • Page 27 sa f e t y & s e cu r it y Fire and Fire Alarm ........................26 Escape Paths ..........................28 Children ........................... 28 Ventilation ..........................29 Security ............................ 29 CO Alarm ..........................30...

  • Page 28: Fire And Fire Alarm

    fi r e and f ir e al arm FIRE BATTERY REPLACEMENT IMPORTANT: Only the following batteries Important: Your attention is drawn to the can be used for replacement. Use of a battery notice affixed inside the wardrobe advising on other than those recommended below may fire precaution, ventilation and what to do in have a detrimental effect on the detector’s...
  • Page 29 f ire a l a r m 2. Remove the existing battery and replace ALARM TEST with a new battery. From the list on this 1. Press the test button in the centre and page, making sure that the positive and release.

  • Page 30: Escape Paths

    fi r e ala rm NOTE: The test button accurately tests the Warning: The electronic test button alarm’s smoke sensing circuit, there is no need provides a full test of the unit’s functionality. to test your alarm with smoke. If your smoke DO NOT try to test the alarm with a naked alarm fails to give an audible test signal, please flame, as this may present a potential fire...

  • Page 31: Ventilation

    ven ti l at ion a n d se c u rit y Ventilation VIN (Vehicle identification Number) All motorhomes comply with BS EN 721. The Record your motorhome VIN which can be ventilation points on your motorhome are fixed found on the lower edge of the base vehicle points of ventilation which are required by the front windscreen and the plate located on the...

  • Page 32: Co Alarm

    c o alarm CO ALARM • Do not re-enter the motorhome until the alarm has stopped. When exposed to Fireangel CO-9X Carbon Monoxide Alarm fresh air it can take up to 10 minutes for the sensor to clear and the alarm to stop WARNING: Please read the full user depending on the level of carbon monoxide instructions provided.
  • Page 33 NORMAL OPERATION OF THE ALARM • Within 3 minutes when exposed to a minimum of 300ppm of CO. When the detector is activated the Power LED will begin to flash green once every FAULT / LOW POWER PACK SIGNAL: minute to indicate that the detector is The unit continuously checks the settings receiving power from the power pack and is of its sensor and circuitry.
  • Page 34 s afety & s ecu ri ty...
  • Page 35 a r riva l at s it e Positioning the Motorhome ..................... 34...
  • Page 36 po s it io ni n g the motor hom e note: Check and observe site regulations. Keep to roadways unless otherwise directed. Adhere to speed limits. Note that these are generally 10mph. Remember that the stopping distance on grass is considerably greater than on tarmac Only a person in possession of a current driving licence may drive on the site.

  • Page 37: Connecting Services

    c o n ne c t in g se r v ice s Water system ..........................36 Pressure switch ..........................39 Water level sensor and cleaning ....................41 Typical gas schematic drawing ....................44 Gas ............................44 Types of gas ..........................45 Gas safety advice ........................45 Thermal insulation and heating ....................49 Electricity ...........................49 Mains connecting cable ......................50...

  • Page 38: Water System

    wat er sy stem WATER SYSTEM- INTRODUCTION All Swift Group motorhome water systems have been designed around a pump fitted within the motorhome. This pump draws water from an under floor or internal water tank, to provide water pressure within the water system, whenever it is switched on and water is available.
  • Page 39 wat e r ta n ks FRESH WATER SYSTEM All fittings, including the holding tank, water pipes, taps and connections are of food quality material (to BS6920) and therefore, should not affect the quality of the water used. It is recommended however, that the system is flushed through twice before it is used for the first time, and always cleaned/flushed after it...
  • Page 40 cleani ng water sy stem Please ensure all taps are fully turned off when caused by bacterial contamination are not not in use. purely limited to gastro-intestinal diseases, but may also manifest themselves as ear, nose, We recommend the use of Milton 2 sterilising throat, eye or skin infections.

  • Page 41: Pressure Switch

    p r e ss u r e sw it c h PRESSURE SWITCH empty filter cartridge (this will ensure the filter is not affected by the disinfectant/ The purpose of a pressure switch is to monitor sterilant solution). the pressure on the outlet side of the pump. 3.

  • Page 42: Trouble Shooting

    wat er sy s tem tro u bl e sh oo ting The pump may have to be removed to gain • Ensure the inlet side of the pump is access to the adjusting screw. Drain the water watertight and not allowing air into system before removing the pump.

  • Page 43: Water Level Sensor And Cleaning

    water lev el se ns or a nd cl e a n in g WATER LEVEL SENSOR 6. Rub sensor studs removing contamination & CLEANING 7. Swill sensor studs with fresh clean water Principle 8. Replace sensor stud into tank, ensure they are sealed.
  • Page 44 water system fau lt f in di n g WATER Fault Cause Remedy Water not Freshwater tank empty Check flowing from Pump wired in reverse Check wiring, refer to pump manufacturers any tap when instructions operated but Pipe inlet or outlet pipe Check connections pump runs disconnected...
  • Page 45 WATER Fault Cause Remedy Water flows Cold water pipe kinked Check and re-route if necessary from hot preventing flow tap but has Blockage in cold pipe line Disconnect pipes after 1st connector and reduced flow check up to tap from cold Cold tap not connected Refer to installation instructions Cold tap failed or blocked...

  • Page 46: Typical Gas Schematic Drawing

    g as TyPICAL GAS SCHEMATIC DRAWInG We do not recommend the use of an inline LPG BBQ with the 1.2kg/H regulator when GEnERAL InFoRMATIon other LPG appliances are in use. Gas Bottles Bottled Liquified Petroleum Gas (LPG) is the most convenient portable source of fuel for your vehicle.

  • Page 47: Types Of Gas

    Facts about LPG Ensure that there is a constant rise in the flexible gas hose between the gas bottle outlet LPG is not poisonous. and the regulator elbow. Bi-products are harmless. WARnInG: Inspect flexible gas hose(s) There is danger if all air and oxygen were regularly for deterioration and renew excluded.
  • Page 48 g as h) Always seek advice when in doubt. d) Make firm gas-tight joints. Any leaking vapour will smell. If a leak is suspected WARnInG: Do not use appliances with a after changing gas cylinders and opening different working pressure to 30mbar. valve, test by brushing with soapy water around the joints.
  • Page 49 b) The strong unpleasant smell of LPG will Open ended gas hoses must always be enable the general area of the leak to be protected from dirt and insects. detected. Check that gas is not escaping Before turning on the gas supply at the from an unlit appliance.
  • Page 50 g as fault f i n di n g Fault Cause Remedy Hob does No gas Check level of gas in bottle not light Check gas bottle valve is on Check gas taps are on Air in pipe Purge system Refer to hob manufacturers instructions Oven does No gas...

  • Page 51: Thermal Insulation And Heating

    el e ct r ica l s y s t e m THERMAL InSULATIon • Make sure that the supply from the site is switched off. AnD HEATInG • Make sure that the charger switch on the Your vehicle has been designed to achieve a PSU is switched off.

  • Page 52: Mains Connecting Cable

    w ir i ng of m ain s con n ec ti n g c a bl e...

  • Page 53: Overseas Connection

    o verse a s c onn e ct ion / 230 v elec tr ic a l c ons u mp t ion OVERSEAS CONNECTION 230V MAInS ELECTRICAL EQUIPMEnT PoWER • Connection to a mains voltage overseas ConSUMPTIon requires particular attention. •...

  • Page 54: Typical Appliance Consumption Figures

    po wer c on s u mp ti on...
  • Page 55 el e ct rica l s y st e ms Motorhome battery ........................56 EC400 Power Control System ....................56...
  • Page 56 m o t or home battery Motorhome battery Under normal circumstances it should not be necessary to remove the battery other than for Your motorhome has been fitted with a sealed, routine inspection of terminals. Absorbed Glass Matt leisure battery which is specially designed for installing on its side Your motorhome has been fitted with an in- line 20 amp fuse between the battery terminal...
  • Page 57 EC400 PoWER ConTRoL SySTEM The system has a number of key components that you will need to be familiar Introduction with before attempting to use the system, these are: This section of the handbook will guide you through the operation of the electrical • T he Power Supply Unit (PSU) - a combined system.
  • Page 58 ec4 0 0 power con tr ol syst em 2 USInG THE SySTEM B) Switch the PSU Power Converter OFF. Locate the green ‘Charger’ power 2.1 Power Supply Unit - switch on the PSU and ensure the Component Layout switch is in the off position (button The PSU is located in the bed box area.
  • Page 59 EC462 Fresh water Waste water Vehicle battery Leisure battery Mains supply & level gauge level gauge selected LED selected on charger on Leisure battery Vehicle battery selection button selection button Leisure battery Vehicle battery voltage gauge voltage gauge Internal on/off Awning Light Water pump View levels button,...
  • Page 60 3 SySTEM TECHnICAL The Miniature Circuit Breakers (MCB’s) operate in a similar way to traditional fuses InFoRMATIon and are provided to protect the wiring The following section provides further installation from overload or short circuit. technical information relating to the If an overload occurs the MCB will switch electrical system.
  • Page 61 The following table shows the rating and circuit allocation for the three MCB’sMCB’s fail to ‘latch’ in the on position see section 3.10. Rating output Wire Colour Description 10 Amps White 230v Sockets 10 Amps White (Yellow for heater) Extra 230v Sockets / Space Heater 10 Amps Black (Blue for water heater) Fridge / Water Heater / 12v Charger...
  • Page 62 elec tr ic al sy stems Some vehicle installations can cater for To prevent over discharge, the EC400 two leisure batteries connected in parallel. system incorporates a battery protect In these cases it is recommended that two circuit that warns the users and then identical batteries are used.
  • Page 63 el e ct rica l s y st e ms Battery Voltage Action after cut off notes cut off Vehicle 10.9v Battery selection is changed This cut off level is designed to from Vehicle battery to Leisure protect the vehicle battery from over battery.
  • Page 64 elec tr ic al sy stems 3.5 12 Volt DC Fuses WARnInG: When replacing fuses always replace a fuse with the correct value. nEVER replace with a higher value / rating as this could damage the wiring harness. If a replacement fuse ‘blows’ do not keep replacing the fuse as you could damage the wiring harness.
  • Page 65 el e ct rica l s y st e ms 3.6 Solar Charge Management 3.9 Electric Step operation The PSU incorporates a built-in solar On vehicles fitted with an electric step, charge management feature, which will this is operated by a button near the entry control the input from a separate solar door.
  • Page 66 elec tr ic al sy stems 3.10 Common Fault Table Fault Possible Cause Proposed Fix Connecting lead between Check and connect lead as per 2.3C the site and Leisure Vehicle not connected RCD switched off Reset RCD as per 2.3D RCD not operating correctly Check supply polarity; if the RCD continues to fail contact your Dealer as there is probably an equipment or wiring fault.
  • Page 67 el e ct rica l s y st e ms Fault Possible Cause Proposed Fix Control Panel has no display Check batteries and fuses, turn PSU isolate switch and charger switch on and ensure mains supply is connected. Check control panel connecting lead at PSU and behind Control Panel Contact your Dealer 12v Power turns off...
  • Page 68 elec tr ic al sy stems 3.11 Contact details Sargent Electrical Services Limited provide a technical help line during office hours. Please contact 01482 678981 if you require technical help. For out of hour support please refer to the tech support section of the Sargent web site www.sargentltd.co.uk...

  • Page 69: Equipment Details

    e qu ip me nt de ta ils Fresh Water Pump ........................68 Truma ultra-store water heater ....................69 Trumatic E2400 ..........................71 Truma Combi 4 / Combi 6 ......................76 Refrigerators ..........................83 Thetford absober fridge ......................94 Waeco fridge ...........................102 Spinflo oven ..........................108 SMEV mini grill / oven ......................111 SMEV hotplate .........................112 Thetford cassette toilet ......................113 Thetford C250 &...

  • Page 70: Fresh Water Pump

    fr es h water p um p FRESH WATER PUMP The instructions covering fitted equipment to your vehicle were correct at the time SWITCH SHUT-oFF of going to print. Owners handbooks are updated annually and we take great care to Restrictions in a plumbing system may cause try and ensure their accuracy. However, the pump to rapid cycle (ON/OFF within 2...

  • Page 71: Truma Ultra-Store Water Heater

    tru ma u ltr asto r e wat e r h e at e r note: If only the cold water system is being NOTICE: In the interest of safety, used, the heater tank will also fill with replacement parts for an appliance shall water. In order to avoid damage through conform to the appliance manufacturer’s frost, the water heater must be drained as specifications and should be fitted by them...
  • Page 72 t r u m a-ultrasto re water h eat e r De-scaling 5. If there is air in the gas supply line, it may Introduce wine vinegar into the water system take up to a minute before the gas is and allow time for it to react with the scale.
  • Page 73 Liquid gas systems must comply with the technical and administrative regulations of the respective country of use (e.g. En 1949 for vehicles in Europe). A qualified technician must inspect/test according to En 1949 every two years and a certificate issued. The vehicle owner is always responsible for arranging the inspection.

  • Page 74: Trumatic E2400

    tr u mat ic lp g heater TRUMATIC E2400 c ‘ Heating’ rotary switch high setting (large flame symbol) and low setting Trumatic E 2400 L.P.G. Heater with (small flame symbol) electronic control, built-in air distribution ‘Off’ rotary switch and thermostat ‘Ventilation’ rotary switch high setting (large symbol) low setting (small symbol) operating instructions Always observe the operating instructions and...
  • Page 75 If the appliance is not used for a prolonged control panel (e.g. performing a fault reset)! period of time, close quick-acting valve in the Flash operation indicates that the operating gas supply line and turn off gas cylinder. Green voltage is too low or too high for the appliance indicator lamp ‘Operation’...
  • Page 76 tr u mat ic lp g heater Accessories Important operating notes 1. Control unit VG 2 – for heaters of driver’s 1. If the chimney has been placed near or cabs in tank vehicles, for the transportation directly beneath an opening window, of hazardous goods according to ADR the device must be equipped with an (not to be used in combination with a...
  • Page 77 The Truma SecuMotion gas pressure regulator 3. Liquid gas systems must comply with the meets this requirement. technical and administrative regulations of the respective country of use (e.g. EN 1949 If no Truma SecuMotion gas pressure regulator for vehicles or EN ISO 10239 for boats in is installed, the gas cylinder must be closed Europe). National directives and regulations whilst driving and information signs must be (e.g.
  • Page 78 tr u mat ic lp g heater Current input at 12 V 8. Only pressure control equipment that High setting: 1.1 A complies with EN 12864 (in vehicles) and EN Low setting: 0.6 A ISO 10239 (for boats) with a fixed delivery pressure of 30 mbar must be used for the Current input at 24 V gas system.

  • Page 79: Truma Combi 4 / Combi 6

    tru m a c ombi 4 / combi 6 TRUMA CoMBI 4 / CoMBI 6 are heated in the smallest burner stage. Once the water temperature is reached, the burner switches off. – In winter operation, the unit automatically selects the required power setting according to the temperature difference between the temperature set on the control panel and the current room temperature.
  • Page 80 tr u ma c omb i 4 / com bi 6 During the initial operation of a brand new The integrity and tight fit of the exhaust appliance (or after it has not been used for gas double duct must be checked regularly, some time), a slight amount of fumes and particularly at the end of long trips.
  • Page 81 Gas operation (heating and hot water) the type of vehicle. For an average room temperature of about 23° C, we recommend a thermostat setting of about 4. Taking into operation Heating operation is basically possible without restriction with or without water content. Check to make sure the cowl is unobstructed. Be sure to remove any covers that may be present.
  • Page 82 tr u ma c omb i 4 / com bi 6 thermostat setting (1 – 5). The green LED (b) for If the appliance is not to be used for a operation is lit and simultaneously indicates the prolonged period, close the quick-acting valve in position of the selected room temperature.
  • Page 83 Fuses When connecting to a central water supply (rural or city mains), a pressure reduction valve The unit’s fuse is located on the electronics must always be installed to prevent pressures under the connection cover. Replace the unit’s above 2.8 bar from developing in the water fuse only with an identical fuse.
  • Page 84 tr u ma c omb i 4 / com bi 6 Technical data The heater complies with heater directive 2001/56/EC and supplements 2004/78/EC Determined in accordance with EN 624 or and 2006/119/EC and bears the type approval Truma test conditions number Combi 4: e1 00 0193 Combi 6: e1 00 Type of gas: Liquid gas (propane / butane) 0194.

  • Page 85: Refrigerators

    re f rige r at or s DoMETIC REFRIGERAToRS Caution: only use one source of energy at a time. After initial installation, servicing or changing gas cylinders etc., the gas lines may contain some air which should be allowed to escape by briefly turning on the refrigerator or other appliances.
  • Page 86 r efr ig er ators Warranty and customer service • I t is imperative that the operating pressure should correspond to the data given on Warranty arrangements are in accordance the model plate of the appliance. with EC Directive 44/1999/CE and the normal • C ompare the operating pressure data conditions applicable for the country concerned.
  • Page 87 Warning: To avoid deterioration of materials: • D o not use soap or hard, abrasive or soda- based cleaning agents. • D o not allow the door seal to come into A = energy selection switch contact with oil or grease. B = gas/electric thermostat AC/DC C = operating displays (4 LEDs) D = temperature setting display Using the refrigerator E = dimmer for LED-displays • The cooling unit is silent in operation.
  • Page 88 r efr ig er ators 3. Use rotary switch (B) to regulate must be taken (in conformity with the the temperature in the main European standard EN 732). refrigerator compartment. • O perating the refrigerator with gas is not Note: If the operating display fails to light up ( permitted during travel in France and it lights up ‘red’ at AES models ) the device is Australia.
  • Page 89 4. Set the main switch (A) to ‘on’ The re-ignition starts again. If after about 30 seconds the operating display (C) starts flashing red again, the gas fault has not been cleared (e.g. air in the gas pipe). 5. Briefly switch the refrigerator off and then on again using main switch (A).
  • Page 90 r efr ig er ators The use of naked flames is prohibited • L ED - dimmer (E) for adjusting the in petrol station environments. If the brightness of the display-LED (only refuelling stop lasts longer than 15 mins accessible when door opens) the refrigerator should be switched off at the main switch (A), or switched over to another energy type.
  • Page 91 Storing Food 5. Use a cloth to mop up the water from the freezer compartment. • S witch the refrigerator on approximately 12 hours before filling it. 6. Switch the refrigerator back on again. • A lways store food in sealed containers, Warning: The layer of ice must never be aluminium foil or similar.
  • Page 92 r efr ig er ators Door Locking Switching off gas operation open If the refrigerator is to be taken out of service for an extended period of time, the on-board shut-off valve and the cylinder valve must be closed. Winter operation 1.
  • Page 93 Interior light Changing the light bulbs 1. Remove cover. 2. Detach defective light bulb. 3. Fit new light bulb 4. Clip the cover back in place. note: For 12V DC : 1 light bulb 12V, 2W Please contact Dometic Service Centres for replacement light bulbs.
  • Page 94 r efr ig er ators TRoUBLESHooTInG Possible cause Action you can take Failure : The refrigerator does not work in gas operation mode Gas bottle empty. Change gas bottle. Is the supply cut-out device open? Open the cut-out device. Air in the gas pipe? Switch device off and on again 3-4 times to remove air from the gas pipe.
  • Page 95 EnVIRonMEnTAL HInTS Before calling the authorised Service Department, please check whether: Refrigerators manufactured by Dometic GmbH are CFC-free. 1. The instructions in the section ‘Using the refrigerator’ have been followed. Ammonia (a natural compound of hydrogen 2. The refrigerator is not tilted excessively. and nitrogen) is used in the cooling unit as a coolant. The non-ozone-hazardous 3.

  • Page 96: Thetford Absober Fridge

    r efr ig er ators THETFoRD ABSoRBER Important! “Important” denotes supplementary information for REFRIGERAToRS the user and alerts the user to Attention: Do not operate the water potential problems. heater without water in it! Warnings This user’s information is for N80 models of • T his refrigerator must be installed according Thetford absorption refrigerators. It explains to the manufacturer’s instructions and how to use your refrigerator correctly and in compliance with local and national...
  • Page 97 - do not switch on any electrical devices • c lick the plastic bracket to the right short side or lighting; of the rack; - open the windows and leave the room; • t urn the bracket into the horizontal position and insert the rack tipped in a sloping - contact the Customer Service position into the refrigerator; department of Thetford. • p lace the short side without bracket into • You suspect a leak in the cooling system: one of the grooves on the left wall of the refrigerator;...
  • Page 98 r efr ig er ators SWITCHInG on THE REFRIGERAToR - Use only drinking water to make ice cubes. (control panel) - Do not place any other products in the freezer compartment when you are making • I t is recommended to clean the inside of the ice cubes. refrigerator before you switch it on. - W ater freezes fastest with the thermostat at • L et the refrigerator cool for at least eight the highest setting.
  • Page 99 C. Use the cooling level selector switch to sure that the ventilation openings in the gas control the temperature of the refrigerator. container storage location remain open. When you press the cooling level selector • T he changing of the gas container must be switch, the LCD backlight will light up and done outside in the open air and out of reach show the currently set temperature.
  • Page 100 r efr ig er ators MAInTEnAnCE Door locking mechanism Regular maintenance is necessary to ensure the Frost will form in the refrigerator if the door correct functioning of your refrigerator. is not closed properly. To determine whether the door closes properly, close the door with Cleaning a piece of paper between the door and the Tip! A good time to clean your refrigerator is...
  • Page 101 Storage • t he gas burner must be cleaned at least once a year or more frequently if necessary. If you do not expect to use your refrigerator • I f a gas hose is used, it must be checked for a lengthy period, carry out the following annually. This hose has a limited life and, actions: thus, must be regularly replaced.
  • Page 102 r efr ig er ators Possible cause Action you can take Problem: refrigerator will not work on gas a) Gas bottle is empty. a) Replace the gas bottle. b) Valve of the gas bottle or one of the shut- b) Open the valve of the gas bottle or shut-off off valves is closed.
  • Page 103 • Fault 8: AC mains supply is 20% below GUARAnTEE, CUSToMER SERVICE AnD LIABILITy nominal. Guarantee Action: Your controls are in manual AC mode, but there is no power available. Check Thetford B.V offers the end users of Thetford if you plugged in the 230V connection, if so refrigerators a three-year guarantee.

  • Page 104: Waeco Fridge

    waec o f ri dg e WAECo FRIDGE EnVIRonMEnT Refrigerators manufactured by Thetford B.V. are PCB-free. Most of the refrigerator is recyclable. If the refrigerator has reached the end of its service life, contact your local waste processing company to dispose of the refrigerator in an environment-friendly way.
  • Page 105 Food may only be stored in its original • N ever re-freeze products which have packaging or in suitable containers. Ensure that started defrosting or have been defrosted, the objects placed in the refrigerator are suitable but consume them as soon as possible. for cooling to the selected temperature.
  • Page 106 waec o f ri dg e Replacing the interior light If the interior light in the refrigerator is faulty, you can change the bulb (12 V, 3 W). • R emove the cover. • P ull the light (5) out of the sheet metal straps. Switching off and storing the refrigerator If you do not intend to use the refrigerator for a long time, proceed as follows: • S et the temperature control knob to level ‘0’.
  • Page 107 9 Cleaning and care no. of Fault Possible cause Do not use abrasive cleaning agents or hard flashes objects during cleaning as these can damage Supply The supply voltage the refrigerator. Never use hard or pointed voltage is outside of the tools to remove ice or to loosen objects which set range.
  • Page 108 waec o f ri dg e InTERIoR TEMPERATURE Too LoW In ConTRoL LEVEL ‘1’ FAULT PoSSIBLE CAUSE REMEDy Compressor runs constantly Faulty thermostat Change the thermostat Compressor runs for a Large quantities have long time been frozen in the freezer compartment CoMPRESSoR DoES noT RUn (BATTERy ConnECTIon) = 0 V There is an interruption in...
  • Page 109 CoMPRESSoR IS noT RUnnInG (ConnECTED To AC SUPPLy) FAULT PoSSIBLE CAUSE REMEDy No voltage Interruption in the Establish a connection supply cable Main switch faulty Replace the main switch (if installed) Additional supply line fuse Replace the supply line fuse has blown (if installed) Voltage is present but the Ambient temperature too high compressor doesn’t run...

  • Page 110: Spinflo Oven

    s pi nfl o oven SPInFLo oVEn or taper to the burner and push the control knob in and hold. It is necessary to hold IMPORTANT: Before using the appliances the knob depressed after the burner has for the first time, remove all accessories and ignited or approximately 10-15 seconds, packing in the grill and oven, including any to allow the thermocouple probe to reach...
  • Page 111 The hotplate is a sealed construction and 3. For models fitted with spark ignition the transfers heat through conduction. For procedure is similar except that the burner maximum efficiency a correctly sized pan with can be ignited by depressing the ignition a flat heavy gauge base should be used. Pan button, which is located on the fascia.
  • Page 112 s pi nfl o oven dot on the control panel. Important: The pan supplied with the appliance is multi functional, for use Shelf: The shelf has been designed to either whilst grilling or when using the allow good circulation at the rear of the oven.

  • Page 113: Smev Mini Grill / Oven

    sm e v ov e n & h ot p lat e Don’T allow children near the cooker when in SMEV MInI GRILL use. Turn pan handles away from the front so that they cannot be caught accidentally. USE THE APPLIAnCE onLy In A WELL Don’T allow fats or oils to build up in the VEnTILATED SPACE.

  • Page 114: Smev Hotplate

    s m ev oven & hotp l ate 3) IGnITIon oF APPLIAnCES WiTH USE oF THE RoTISSERIE THERMoSTAT Insert dripping-pan with the rotisserie installed Proceed according to paragraphs 1 and 2, with as indicated in (fig 5a). Push in the appropriate or without electronic ignition.

  • Page 115: Thetford Cassette Toilet

    thetf or d ca ss e t t e t oile t THETFoRD CASSETTE ToILET IGnITIon oF THE APPLIAnCE 1) MAnUAL IGnlTIon HoTPLATE Cassette C-200CS and C200S a) Push in control knob, slightly turn to ignition The toilet section of the C-200 includes a position (big flame).
  • Page 116 t h et ford c ass ette toi let 5. Slide the holding tank into position operation through access door (fig. 5). 8. Turn the bowl in the most comfortable 6. Make sure the holding tank is secured by position (fig. 8). the retaining clip.
  • Page 117 11. C-200 CW only: After use, open valve N ote: Only depress the vent button when blade (if still closed) and flush, lift the flush pour out spout is pointed downwards. handle and press it down (fig. 11). After Rinse the holding tank with clean water. For flushing, close the blade by turning the preparing for use again, see steps 1 to 7.
  • Page 118 t h et ford c ass ette toi let High altitude and warm weather use To clean the holding tank, empty the tank, and rinse with clean water. Use a mild soap Pressure may build up in the holding tank if to clean toilet bowl, seat and cover, as well as the tank is not inserted while driving at high exterior of toilet unit and holding tank.

  • Page 119: Thetford C250 & C250S Toilet

    thetf ord c2 50 &c2 5 0s c a s s e t t e to il e t THETFoRD C250CS AnD C250S g) Rotating Emptying Spout CASSETTE ToILET h) Automatic Pressure Release Vent The Thetford Cassette Toilet is a high quality Sliding Cover product.
  • Page 120 t het fo rd c 250 &c2 50s c as se t t e t oil e t Waste Pump-Out System Warning! never use force if you cannot get the tank back into place easily. This s) Waste Holding Tank Multi-Level Indicator may cause serious damage. If blockage Flush-Water Tank Level Indicator (only if occurs, always check if the blade handle toilet has its own flush-water tank)
  • Page 121 16. P lace the Waste Holding Tank in an upright Important Warning notice! If your toilet position (Pull-Out Handle at the top, has its own flush-water tank, please Wheels at the bottom). Slide the handle make sure that you do not travel with sideways - to the front of the tank - until it a flush-water tank that is too full.
  • Page 122 t het fo rd c 250 &c2 50s c as se t t e t oil e t Emptying with optional features Cleaning and maintenance 19. W aste Holding Tank Multi-Level Indicator: The toilet should be cleaned and maintained The lower lamp indicates that the Waste regularly, depending on the amount of use.
  • Page 123 • R emove the removable mechanism from empty it again. This will clean the pump the Waste Holding Tank by turning it anti- and the hose. Do this once every 3 weeks clockwise and rinse it under a tap. when on holiday. This should ensure proper operation of the system. • R emove the cover plate from the Automatic Pressure Release Vent by prising Winter operation...

  • Page 124: Roof Lights

    w ind ows , bl i n ds & roof l ig h t s WInDoWS Care instructions: Clean the blind only with a damp sponge. Clean on a regular basis to avoid dirt particle build up as this can damage the blind material.

  • Page 125: Blind And Flyscreen

    seat sw iv el, bl in d & f ly s cre e n BLInD AnD FLySCREEn To close, reverse the operation and then check if locked into position. With crank: To open, rotate the crank until a resistance is noticeable during the operation. The blind and flyscreen operate Independently of each other and are engaged by connecting To close, reverse the operation and then check...

  • Page 126: Furniture Doors

    d o o r s , ta b le stor ag e, ca r e of f u nit u re , sho wer & o mn is te p SHoWER Care instructions: Please clean the acrylic panes with the When using the shower, always ensure that Seitz Acrylic Cleaner.

  • Page 127: Omnistor Awning

    om nis t or aw n in g oMnISToR AWnInG 3. Unroll the awning while keeping the crank down. The awning will only open after a General remarks: couple of turnings. An awning is a sun and not a rain protection.
  • Page 128 om nis t or aw n in g 6. Adjust them to the required height. The 8. Install the tension rafter (for 3.75 m fabric can be tightened by rolling up a awning). little. 9. When raining, lower one side of the awning in such a way that the water can run down the fabric.
  • Page 129 A. Determine the position of the bottom mounting bracket on the vehicle wall. B. Install the bracket with the supplied screws or rivets...

  • Page 130: Status 315 Omni-Directional Television & Fm Radio Antenna

    s tat u s 315 tv & f m radi o a er ia l STATUS 315 oMnI-DIRECTIonAL 4. Electrical Interference TELEVISIon & FM RADIo This type of interference is commonly caused AnTEnnA by electrical appliances, such as fans, electric shavers, fluorescent lights.
  • Page 131 Fault finding If the LED is still not lit, please contact our office for further assistance. The following are some of the key areas we suggest you check which generally solve the most common problems encountered with the Short Hook Up Test operation of the Status antenna.

  • Page 133: Motorhome Care

    m ot orh ome ca re Winterisation/storage .......................132 General ............................132 Condensation ..........................133 Interior .............................134 Caring for the environment ......................137...

  • Page 134: Winterisation/Storage

    w in ter isati on / stor ag e WInTERISATIon/SToRAGE door tracks, Bottle box hinges, Exterior door hinges, Plastic tracking etc. We recommend This is probably an opportune moment to “Ambersil 40+” this is readily available from arrange for the Motorhome to have its annual most DIY/Automotive retailers including service at your appointed dealer.

  • Page 135: Condensation

    c onde n sat ion keeping your Acrylic Windows Sparkling and because skylights, windows and doors are For small scratches, it is possible to use a opened less and therefore the moist air cannot liquid metal polish or a proprietary acrylic escape.

  • Page 136: Interior

    new vehicles opened to about 1cm opening will New Motorhomes often take a long time usually be sufficient. before they are fully ‘dried out’ because Provide reasonable heating of moisture in the materials used in the a) Do not use portable paraffin or flueless gas manufacture. While this is happening they heaters at all.
  • Page 137 Changing Interior Bulbs cushions on their edges to allow circulation of Remove the lens or lamp shade to access air. This will reduce the possibility of dampness the bulb. from condensation. Keep curtains or blinds closed, to minimise fading of furniture. ALWAyS REPLACE LIkE FoR LIkE If the blinds and/or flyscreens remain down for For individual replacement bulb specification,...
  • Page 138 It is recommended to leave the drain taps It is advisable after storage to flush the water in an open position during storage. Before system initially with a sterilising agent (such as recomissioning the system, reverse all Milton), and then with water repeating until above actions.

  • Page 139: Caring For The Environment

    cari n g f or t h e e nv ir onme n t CARInG FoR THE EnVIRonMEnT After many years of service you may decide that your motorhome has become beyond economic repair and should be disposed of. Please ensure that you comply with the end of life vehicle legislation and take it to an authorised treatment facility where it will be properly dealt with to minimise any negative...

  • Page 141: Useful Information

    u se fu l in for mat ion Owners club & aftercare......................140 Useful contacts ........................141 Index ............................144 Change of ownership ......................149...

  • Page 142: Owners Club

    o wn er s cl u b & af tercare oWnERS CLUB The Owners Club is a completely independent organisation run for the benefit of the motorhome owners. They have numerous rallies during the year in various parts of the country. Apart from the friendliness and companionship the Club generate it is also actively engaged in charity work for those less fortunate than ourselves.
  • Page 143 us efu l con tacts & mo to ri n g orga nis at ion s RBS Insurance The enjoyment of your motorhome can be Churchill Court greatly enhanced by membership of one or Westmoreland Road more of the various caravanning, motoring and Bromley holiday clubs. Here are some useful addresses: Kent...
  • Page 144 u s efu l i nf or matio n...
  • Page 145 u se fu l in for mat ion...

  • Page 146: Index

    ind ex Index ......144 Advice on towing....22 Interior.
  • Page 147 in de x Table storage ..... 124 Thetford absorber refrigerators ..94 Thetford C250CS and C250S cassette toilet .

  • Page 151: Change Of Ownership

    c ha n ge of ow ne r s h ip CHAnGE oF oWnERSHIP noTIFICATIon oF CHAnGE oF oWnERSHIP If you sell your motorhome, please notify the change of ownership by completing this page, detaching it and sending it to: Swift Group Limited Dunswell Road, Cottingham, East Yorkshire, HU16 4JX...
  • Page 153 Swift Group Ltd, Dunswell Road, Cottingham, East Yorkshire, HU16 4JX Tel: 01482 875740 Fax: 01482 840082 Email: enquiry@swiftgroup.co.uk www.swiftgroup.co.uk 1096393...

Table of Contents